Wireless printing solution

Similar Questions

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP 4500 wireless printer: printer all-in-one cannot scan glass

  My hp 4500 wireless printer worked fine until it just stopped printing.  I reintstalled the original installation disk and printing has been repaired.  However, the desktop icon for the hp Solution Center, which allows scanning of computer files, has not been activated, and accordingly, I am unable to scan from glass.

  New driver from HP site could not install completely and still have the same problem.  I tried to reinstall the existing drive, and it is still able to print, but still can not sweep.  The desktop icon is always off.  Didn't test the fax.

  I have here an updated driver that contains the implementation complete for the 4500 Wireless: G510n-z

  My system is Windows 7 64 bit.

  Please answer.

  Hello @rudetom,

  I would like to see if I can help you get your Officejet 4500 Wireless software working again.

  Looks like pieces of old software is causing the installation to fail. I would like to clean at the far (unisntall) and try again.

  When you have uninstalled the printer software, it is possible that pieces of it may remain which could interfere with a reinstall. I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software. * If you are connected with a USB cable, be sure to unplug it.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available.

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  ' 1) click on start (Windows icon) and enter the Device Manager "in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper windows and then show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, right click on the device name in the list and then click on uninstall.

  For more information, see device for Windows 7 Manager information.

  Once you have removed everything, I restart your computer and then try to download the new software again to HP Officejet 4500 Wireless - G510n full feature software and driver.

  If you still have problems, please let me know what kind of error you get and how your printer is connected to your computer. What is direct installation USB or wireless?

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Pavilion Touchsmart 15 Note: hp photosmart wireless printer does not print

  I have a Photosmart eStn 510 wireless printer series, which comes as default printer and seems active (not offline). When I print something - and I tried different programs - the document appears in the print queue, says it's printing, but nothing prints. If I restart my computer, the document will print until I connect. I tried stop the print spooler, but then couldn't do restart.  I looked at the printer using the HP Solution Center, and he says he's online.

  I have printed successfully to this printer wireless until I upgraded to 8.1.

  Thanks in adance for your help.

  Hi @susanc2,

  Welcome to the HP Forums!

  I understand that your HP Photosmart eStation is not print wireless on Windows 8.1. I'm happy to help with this problem!

  Please take a look through this guide, your HP printer print jobs are stuck in the print queue. I believe that these steps will ensure that your situation.

  Good luck!

• HP wireless printer (3545) showing only printer and scanner, connected via Wireless

  When I connect via USB, I see Print/Scan option in the settings system-> Printers & Scanners

  But when I connect through wireless, I only Print

  What is the problem?

  Even in the HP utilities, I don't see this option "Scan to Computer" when it is connected to the wireless printer

  Hi TahseenJamal,

  Thanks for the video, which has been most useful.

  I suspect that the router can be not broadcast the Hello Protocol as it did in the past. To resolve this problem, please follow the instructions below.

  1. Out of the router, unplug the power cable
  2. Out of the printer, unplug the power cable
  3. Stop the Mac
  4. Give up everything for 1 minute and then reconnect the router
  5. Once sighted routers are on, reconnect the printer to the
  6. When the wireless printer is solid, turn on the Mac
  7. Now try to add the printer that you had previously, you should now see the Hello or Hello printer multifunction beside him.

  If this does not resolve the problem, it could be the printer. Follow the steps below.

  On the front panel of the printer, the arrow down to settings, then press OK. Down arrow for wireless and press OK. In the wireless menu, go to IPV6 and turn it off. Once IPV6 is disabled, try to add the printer in the preferences system again.

  Please let me know if either of these solutions solve the problem and if one of them, please also let me know, thanks.

• Wireless printer KODAK AiO 5250 not connected to the network home.

  Original title: Kodak printer

  I can't get my Kodak AiO 5250 wireless printer to work in my home network.  I did everything that suggested, with networked through the printer, tried by printer with zip drive, etc.  Nothing seems to work?  Looking for a solution.

  Dan

  If you told us what OS you run that we could have got up a driver for you

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut

• Connection a wireless printer HP Netbook (Windows XP).

  I put up wireless a new Brother MFC-J265W printer to a desktop operations Dell Windows 7. It works fine, but I'm not working, how do I get my HP Netbook to be able to print to the printer.  I've implemented 'Sharing' of the printer. Trying to ADD printer for netbook, it finds the wireless printer, but it does not find 'pilot' say.  I have download the drivers to speific the site of Brother on the Netbook? So frustrating. Any ideas, please?

  I put up wireless a new Brother MFC-J265W printer to a desktop operations Dell Windows 7. It works fine, but I'm not working, how do I get my HP Netbook to be able to print to the printer.  I've implemented 'Sharing' of the printer. Trying to ADD printer for netbook, it finds the wireless printer, but it does not find 'pilot' say.  I have download the drivers to speific the site of Brother on the Netbook? So frustrating. Any ideas, please?

  Do you mean that you HAVE downloaded the driver from the Brother website or ask you if you have TO download the driver?

  Yes, you need to download the driver (because I assume that you don't have a CD for the Netbook player and so cannot use the CD that came with your printer).

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/DLF/000000/004400/dlf004455.html?reg=us&c=us&lang=en&prod=mfcj265w_all&type2=1&OS=7&flang=8&dlid=dlf004455

  This printer is responsible for integrated wireless network, so it is unclear what you mean when you write that you set up wireless "for a desktop Dell Windows 7 operating."  Usually, we use a network printer is NOT connect directly to a computer, but to allow the printer to connect directly to the network, either through an Ethernet cable to the router, or a wireless connection to the router.

  If your printer works on the Windows 7 computer WITHOUT being connected using a USB cable, you have things correctly.  And, if the printer is not directly connected to the Win 7 computer, there is no need to configure sharing the printer on this computer, and you should not do.  'Sharing' in the sense of network Windows means sharing a resource that "belongs" to a computer, such as files on the hard disk of the computer, or a printer attached to the computer via USB or parallel port.

  Just download the software package for the Netbook and follow the instructions on the download page, linked above.

• Samsung tablet wireless printing

  I'm trying to connect the samsung tablet to hp officejet wireless printer 4610 I downloaded the correct application, but my samsung keep showing I can only print on a samsung printer.  My iphone worked perfectly

  Hello and welcome to the HP support community!

  Samsung has coded the "Print" function to look for their own printers.

  To use ePrint, you need to choose 'Share' instead, and then directly the ePrint file or send the file as an attachment to your printer.

  The latter assumes that you have registered your printer with HP Connect and have received the e-mail address for him.

  Another solution is an option of $13.  There are two programs in the game store tailored to devices from Samsung - PrinterShare and PrintHand.  I used both to print on my printer wifi and BlueTooth OfficeJet 150.

  (I am not affiliated with each application, just an end user).

  WyreNut

• Boxes wireless printer work without connection to the modem HP 6700 printer

  My printer is located on the second floor of our House. It is connected to our network with the modem and the router to the first floor where my wife's computer. This connection works fine.

  My problem is that my printer only works if connected to my computer with a USB cable. This limits the use of a number of functions of the printer. Print the test pages that I myself say the printer is connected to the home network, but the printer will not work without the USB cable that turns off the Wireless function.

  Most of the instructions I've read show that I need to be connected to the modem downstairs to work. It is not possible that I can tell.

  Is there a way to fix this? or is a wireless connection to my printer not possible with this configuration?

  Thanks for your help

  Bill6700

  Bill,

  Welcome to the HP Forum.

  You don't mention what kind of computer of mystery that you have and try to use the printer.

  Assuming that the full feature software is available for the operating system of your computer, this may solve the problem - multiple computers can print once installed wireless printing software.  I hope that your computer is among the supported systems.

  General instructions to install the printer software

  Reminder:

  1. In most cases, the Solution Center has been replaced by the wizard of the printer.
  2. Shortcuts to the Printer Wizard must be installed on your desktop during the last part of the installation.

  Windows operating system:

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.

  OR

  • Open printer HP Officejet 6700 Premium e-All-in-One - H711n drivers
  • Enter your operating system the menu drop-down
  • Click NEXT and scroll down
  • Find the driver - product Installation software category
  • Select the driver of base, e-print, or full software functionality
  • Save the package *.exe Setup on your computer

  The files will probably save in the "folder"downloads. "

  Don't forget to search for updates as necessary for your installation. If available, you can download print and scan doctor and / or other programs of category - utilities.

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  • Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
  • Scroll through the list of videos back until you find the video that best fits your situation.
  • If you use a USB connection: download and install the driver software before connecting a USB cable.
  • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
  • Once the initial installation is complete and functional, check / install category - updated

  There is valuable information about the Web site, including your Manual, sections for Troubleshooting > How-to's, Troubleshooting > solving a problemand alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• OfficeJet 4635: Portable wireless printer NEVER lose wireless connection, what gives?

  Why am I never lose my connection to wireless printer?  I entered the network number and the password more than 15 times now.  Ready to return this * #L! printer.  Fact the wizard game until at least 10 times.  What gives?  Saying: this is a wirelss printer is comedy, because it is not.  Drivers are updated, update software.  Occurs on multiple computers.  There, can someone help me and how HP can sell these things when EVERYONE seems to have this problem.

  This solution seems to have solved my problem.  I re-post if it happens again

• Message of invalid argument while trying to install a wireless printer

  I am trying to install a wireless printer from Brother on my laptop which is running Vista. I also have a desktop that runs XP. I have not had any problems for the printer set up and running on XP. However, on Vista, during the installation of the Brother software, I get a message of "arguments are not valid. It seems that the installation is successful, but it's not. The Brother printer appears in the network, but not in printers in Control Panel. I tried a solution listed here, but in the Control Panel, when I try to add a printer, I get a message that Windows can not open "add a printer". Can you help me please?

  Hi cat8woman,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-message-printer-the-arguments-are-invalid/ef284d93-BD50-49c7-9a98-8ef592e0cf3a

  I hope this helps!

• HP 6500 has more wireless printer = > hp eprint does not not with pdf

  I have a brand new HP 6500 has more the wireless printer.

  I tried to print using hp eprint Centre by sending a pdf file as an attachment to the e-mail address of printers.

  But the printer don't like pdf and print an error instead, with the message below page.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  I see that I have a recent version of the Adobe reader - Adobe Reader X - Version 10.1.0

  Please help and let me know if anyone has already had a solution.

  HP customer support -?

  Thank you

  Antony.

  Oh... Yes. It worked. !!

  Thanks Jack for your contributions, which helped a lot.

  The issue was not with the printer, but the PDF itself was a secure PDF document.

  I tried to copy the document from my pc to mac and I tried to open the document, and what I saw, it was exactly what was printed earlier in my first post.  Tried to attach my email and once downloaded, the document had only those got printed text (also pasted below).

  It works when printing directly from the pc more (with or without wire) finally got. Seems good now.

  =======

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

  visit blah blah blah...

  =======

  Thank you

  Antony.

• Connected wireless, printer but not scan

  Well I just bought the 120 want wireless printer. It is connected wireless to my Mac. It allows to print but when I try to scan it does not find my computer. I entered the printer utility and selected scanning to computer, but keep the error message it is not communicating with the printer. (Of course, it's because I can print wireless). Is there a solution to this problem. My wife is running windows and it works perfectly for her through the wireless.

  I spoke to a representative from HP who went on the site of Apple and downloaded the latest version of the MAC compatible print driver. It took to connect with 4 different representatives of HP to solve the problem. I understand the difficulty, however, I think that technicians need to get on the same page. How one Tech may know exactly what to do, then the 3 others sent me in a different direction? The problem has been resolved so thanks to HP staff.

• DeskJet impossible 3070 wireless printing scanning or eprint

  Hello, I'm a Mac OS 10.7 with a Deskjet 3070 b611 series [7CB640].

  I am using CABLE and

  Encryption WPA2 Personal

  I feel wireless and scanning previously, that a month or two ago I got a new router, with a SSID being different to the previous one.  I'm now trying to get printing to work with the new router.    CISCO - modem/wireless router, DPQ3925

  I've uninstalled and reinstalled the software several times.  I can print the Wi - Fi connection test and it looks good, I can print the network configuration page and it seems fine.

  When I print from my PC it it just hangs there saying 'connecting to the printer' but never actually print anything either or ends.

  "When I press the 'eprint' and he tries to set up the automatic update, I get a message that says" the printer could not connect to the internet.  I also have problems with scanning - doesn't work at all, but as fate would be the first impression if you can help I would be very grateful.  I've been playing with this for almost two days now.

  I tried a lot of things I found in the forum, when I type the ip address of the printer in the browser, it cannot connect to it.  192.168.2.245 so I can't go this way of solution for the problem of eprint.

  I have also completed the steps in the post on APple mac printing problems debugging, nothing helps.

  concerning

  Amanda

  Hi AJHHP,

  I'm sorry to hear that you ran difficulties printing to your Deskjet 3070 since installing a new modem/router.

  I've included a link to the HP wireless printing Center.  I went to the section about "replacement of your wireless router. It gives you the steps to follow when you change your router.

  HP Wireless Printing Center - replacement of your wireless router

  http://www.HP.com/global/us/en/wireless/reconfiguring-system-Help3.html