WRT160NL Usb storage not recognized after update firmware

Similar Questions

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• G570 bluetooth not recognized after update to 8.1 windows

  This is a very unusual problem, and I have not found one post on this anywhere!

  First of all my specifications specifications

  Lenovo G570 (reference number: 43345JU)

  i5 - 2410M

  8 GB RAM

  Qualcomm-Atheros AR9285 WLAN

  do not know the brand of bluetooth (for most broadcomm)

  Provided with Win7 Home premium x 64

  The Win7 it came with also had lenovo energy management through which I could toggle the WIFI and bluetooth on and outside. Given that I've never used the bluetooth, I turned it off via Power Mgmt.

  Interestingly, when I was running Win7 I also had this dual boot with Ubuntu. And if my Bluetooth has been disabled through the win7... EM bluetooth wouldn't be recognized in ubuntu and there was no way to turn it back on... I had to start again under win7 and turn it on via EM and start in ubuntu.

  Recently, I updated to Win8.1 but had not put on the bluetooth before doing so. In Win8.1 bluetooth device is not recognized everywhere... no PC settings (metro UI), not even in Device Manager. I tried to install the energy management to 8.1 from the support site, but he was extremely buggy and found no option to activate bluetooth. The old EM has not installed correctly in comaptibilty mode.

  In ubuntu now (dual boot with win8.1) its still the same. Bluetooth not regonised just like before.

  I can't go back to win7 now. There is no correct EM to win8.1. There is no option in the BIOS about bluetooth.

  How can I activate the bluetooth adapter? ANY help is appreciated...

  Hi neokenchi,

  Please help out me. Yes, I had tried to install win7 EM but trotted in compatibility problems. But now started digging through the forums and found a link to EM that works on win 8 and 8.1 of victory. It has even installed the power controller driver virtual lenovo APCI.

  http://driverdl.Lenovo.com.CN/Lenovo/DriverFilesUploadFloder/36900/WIN8_14.EnergyManagement.exe

• 8.1 Windows password not recognized after updates

  After you have installed the Windows 8.1 updates a lot on my new computer, my password does not work more.  Given that I have not yet created a Microsoft account, I can't use this path to get it back. What should I do?

  I discovered what caused this problem.  I bought a laptop with the Swiss German keyboard.  However, I use the English version of the operating system and applications.  As one of the first steps after I activated my new laptop HP Envy, I downloaded and installed all the updates of security to Windows 8.1.  These updates changed PC settings for the keyboard, in particular, to the English keyboard.  In addition to the special characters for the German language, the letters Z and there are reversed on the Swiss German keyboard.  My password included the letter Z, which, after updates, was awarded to another key, namely that of Y.  When I typed Y instead of Z, the system unlocked and I could see then in detail how the settings have been changed.  This is unacceptable!  Also, my old laptop, ThinkPad T series, has a Swiss German keyboard and running the English version of Windows XP.  In six years, I have been using this system, I've never known such a problem!  I hope I won't have to change my settings back after each Windows 8.1 update!

• Pencil of Apple not recognized after update 9.21

  Hi guys

  9.21 yesterday on my ipad pro upgrade and now its telling me my apple pencil is not certified and not recognizable. It won't register for matching and will not charge because it is not recognized. Can someone tell how can I solve this please. I bought the ipad pro and apple prncil directly from apple.com when it was first released.

  Hoping someone can help

  Try a hard reset of your iPad by simultaneously pressing buttons Home and sleep/wake button until your iPad goes to the dark and restarts with the Apple logo, then release the buttons.

  Good luck!

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• Satellite Z30 - A - 12R BIOS password not recognized after update BIOS

  I updated the bios after that I warned the Bios of Toshiba v3.50. The process was done by the utility software of Toshiba and after restarting it has 'password =' on a blank screen and it does not recognize my BIOS password, write not 'certified '.

  I also tried the HARD drive password, but no luck.

  What can I do now?

  Hello

  Before you try to update the BIOS, all passwords must be removed!
  BIOS password can be removed by the authorized service provider available in your country.

  But the unknown HARD disk password can be removed more.
  In such a case the HDD isn't accessible and cannot be used.

  Mate sorry but in my opinion that you only have one chance to get the BIOS password removed. you need the help of ASP.

• USB devices not recognized after exiting standby

  Since that I have rebuilt the system using the Toshiba recoveryware has sent me.

  Is this a known occurrence?

  Hello

  I agree with Lucky. Try to update the BIOS.
  But be careful because bad BIOS update procedure may damage the ROM.

  Good bye

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

  I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  Try the steps in the link and check.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  Method 2:
  You can update the drivers on the manufacturer's Web site and check.
  See the link to update the driver:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
  Manufacturer link:
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Method 3:
  Try the steps from the link and check if you are able to print.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Peripheral USB is not recognized (external hard drive)

  I have a western digital external drive who worked originally on windows XP Edition family, unfortunately this computer crashed and had to reinstall everything. After ending, I went to retrieve some data off the drive and it keeps giving error usb device not recognized. I looked on a lot of different 'solutions' to nothing does not. I can connect to other computers running the same operating system and he shoots very well if it is not the drive. It seems as if a driver is missing, but I checked with Western Digital, and they say the questions is a mistake of operating system, all updates and service packs have been installed. Ive tried all online of the easy solution like just unplug the computer and the drive and restart, remove and reinstall the drivers in the OS System. In Device Manager its reports as an unknown device under the USB bus controllers section. I need to get this to work by car no matter either if it needs to be reformatted or repartitioned, but I can't even pull up on the drive to reformat so don't know what to do. any suggestions are greatly appreciated.

  The problems detected as "unknown".

  http://support.Microsoft.com/kb/314464

  WD Firmware Updater. (May be necessary since you have reinstalled the OS)

  http://www.wdc.com/wdproducts/wdsmartwareupdate/?ID=wdfMyPassport&OS=win&FW=1

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• USB Device not recognized Hp OfficeJet 6600

  Hello all - I use my desktop Hp 6600 (connected via usb) jet and my computer (dell E6430 latitude) says that it is a usb device not recognized.  I tried a lot of troubleshooting, including the removal of usb controllers and reinstall, but which doesn't seem to work.  I'd like to help as soon as POSSIBLE. Again, I must keep my printer cable, because the network, I refuse the acess printers or something like that.

  Thank you

  J

  Hello

  If I understand correctly your computer does not detect the printer. You can try the following steps and check the results.

  1) inspect the cable USB and connection:- icon on the USB () facing up when the cable is connected to the product correctly. Check the back of your product and the back of your computer to make sure that the USB cable connects correctly and safely. After that you make sure that the USB cable connects correctly and safely, consider the following guidelines to check other potential problems associated with USB: Connect any other USB device. Connect any other USB device to the computer and check if it is detected. USB ports on the keyboard. USB ports on the keyboard and on the front of some computers is maybe not powerful enough to support the product. If the USB cable connects to the USB port on the keyboard, try to connect to it in another USB port on the computer. Length of the cable USB. HP recommends that the lower USB cables or equal to 5 m (16 ft 5 in) long. However, a USB cable which is 5 m (16 ft 5 in) in length must be of high quality. Otherwise, HP recommends using a USB cable that is less than 2 m (3 ft 3 in). Do not use connection cables to increase the length of the cable. Use a powered USB hub, if you need more length. USB ports replacing. Connect the USB cable to a different port on the computer to make sure that the USB port on the computer is not the cause of the problem. Defective USB cable. Replace the USB cable to ensure that the existing cable is not defective. Conflicting USB ports. Disconnect all other USB, USB, USB cameras scanners printers and all other connected USB devices. Start the connection of these devices one at a time to determine if the devices to use too much power. Plan to buy and install a hub USB powered if necessary. (2) power Off and power of the device. (3) update the Windows Device Manager: (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens. (b) in the Open text box, type devmgmt.msc and press ENTER. The Windows Device Manager opens. (c) lists to look for your HP printer in Bus USB controllers or other devices . (d) right click on the entry for device to device/unknown HP and then click on set to update driver. The material up to date hospitality Assistant opens. (e) select install the software automatically and click Next. Follow the on-screen instructions to complete the refresh Device Manager. (f) repeat these s for all entries of device with a yellow exclamation point. (4) delete the temporary files and folders. (5) disable some startup items: -. (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens. (b) in the Open box, type msconfig, and click OK. The System Configuration Utility window opens. (a) click on the general tab, click Selective startup. (b) if there is a check next to load startup items, select the check box to remove it. (c) click on the Services tab and then click on the hide all Microsoft Services check box.

  (d) click Disable all.

  (e) click on apply and then click Close.

  (f) restart the computer.

  (6) make sure that the Plug-and-Play Service is activated: -.

  (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

  (b) in the Open box, type services.msc, and then click OK. The Services window opens.

  (c) to seek the 'Plug-and-Play services' and check if the status is started.

  (d) if the status is not started, then right-click on it and select start.

  (e) once on the way out of the window.

  (7) uninstall and reinstall the printer software.

  (8) re-enable the startup programs: -.

  (a) click Startand then click run. The run window opens.

  (b) in the Open box, type msconfig, and click OK. The System Configuration utility window opens.

  (c) click the general tab, click Normal startup.

  (d) click the Services tab, and then select the hide all Microsoft Services check box.

  (e) click applyand then click close.

  (f) click on reboot to apply the changes to the next time the computer starts.

  (9) try to install the software on another computer.

  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "accepted Solution".