WRT54G - wireless connection limits?

Similar Questions

• WRT160N Wireless connectivity limited or not

  Hello. I have a WRT160N router set up on a XP computer with DSL service. Have a Realtek to connect to the network local and Marvell Yukon for the wireless, which presents itself as the connection to the local network 5 in network connections. The Realtek works well but the Marvell Yukon shows "limited or no connectivity" and cannot renew the IP address. Tried to manually key in one IP address, but it runs very slowly (584 sent, received 4) and Network Magic also does not detect connections wireless at all.

  Y does it have wireless connection can get a speed much better with the IP address or are there other parameters that need to be adjusted for this? Is it possible to have two connections working or should be just one or the other?

  Hello. Yes, the OS is Win XP Pro. For some reason, the wireless network connection properties has a second tab for wireless network. The second tab there arises as advanced.

  What finally solved it for me has been assigned an ip address that has worked. Both cards work fine at the same time without any conflict so far. Only using one of them at this point, but it is good to know that the other is works when necessary.

  Thanks for your help, if. Really appreciate it.

• The smartphone on wrt54gs wireless connection does not work

  I recently bought a Samsung GT-B7330 smartphone and want to connect wireless to my router WRT54GS v6.  The phone sees the router, but I can't connect to it.  I've updated the firmware and use the following configuration:

  Mixed technique

  Channel 6

  WPA Personal

  TKIP

  a secure key

  MAC filtering disabled

  There is no way that it wants to connect. However, I went to the Bell store and it connected immediately on their WI - FI when the employee tried.  I'm puzzled.

  I finally found the solution and my phone connects to the router and Internet.  When I discovered that personal WPA and WPA - PSK are the same, everything started working.

  Thanks to those who gave me solutions to try.

• Intermittent wireless connection; limited connectivity message causing to reconnect me

  I keep losing wifi connection, I receive a "limited connectivity" and need to plug and re =.  I have a HP dv6t running windows 7.  The network card is an Intel WIFI LINK 5100 AGN.  I sent an error report to HP and got a call and the tech said I had something about 6,000 error codes, that it should be deleted.  Unfortunately, I was at work and never got a call back.  You are looking for ideas.  Thank you

  Hello:

  I would a driver issue when installing the last direct of Intel driver for your card.

  Run the Intel driver update utility, which will scan your PC and give you a report of Intel drivers that are updated or when updates are available and will be downloads ready to go when you click the menu drop down.

  http://www.Intel.com/p/en_US/support/detect

  Paul

• Router WRT54GS wireless can not connect to internet

  I am now using a WRT160N router, everything is ok, nothing happens

  I have a (ver 6) WRT54GS wireless router that I have not used for 2 years.

  yesterday I took the WRT54GS out of the Junk box and replaced the WRT160N by the WRT54GS

  I have a desktop computer that is wired & wireless laptops. My Office recognizes the local network and my laptop signal but the my router cannot connect to the internet.

  I tried everything:

  reset

  firmware update

  but nothing has worked

  If anyone can help. my ISP is comcast and it comes to my modem http://www.motorola.com/Consumers/US-EN/Consumer-Product-and-Services/Cable-Modems-and-Gateways/SURF...

  Bypass the router and connect the master computer directly to the modem.

  Make sure that you can access the Internet on your primary computer directly via the modem.

  Connect the modem to the Internet port and main computer to the Ethernet port on the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure it manually.

  Follow this link to configure the router with cable Internet service.

• Wireless connection is always set to "limited connectivity" on Windows 8

  My wired connection works fine, but when I try to connect wirelessly, my connection is limited. This problem is not moved when I got to my laptop. I have tried to start in safe mode, install the latest drivers for my wireless card and also get into the command line "netsh". Any help would be appreciated, thanks.

  Please try the below given the stage he worked for me for connection problem in Windows 8 Pro limited. I tried to connect via Nokia Lumia 720:

  1. Right click on your WIRELESS connection and click view connection properties.
  2. Click the Security tab.
  3. Click on Advanced settings which opens the 802.11 settings.
  4. Check compliance to enable FIPS Federal Information Processing Standards () for this network.
  5. Click the OK button.
  6. Reconnect your computer by WIFI and enjoy the internet.

  Please update if it works for you.

• Very limited wireless connection

  I have a HP Pavilion dv7 - 3153ca with a 64-bit windows system 7 and I'm only able to get a wireless connection when the laptop is very close to the modem. Once the laptop is moved, for example, to another floor of the House, the connection is lost and cannot be re established until I have the back next to the modem. He has no problem with the wired connection. This has happened while he was trying to pass my McAfee security provider, although I don't think this is the problem that my other laptop (a Dell) converted without this problem. The other laptop continues to maintain its connection Wireless throughout the House, so the router and the modem is not the issue. I downloaded and re-installed the adapter without modification. I have scanned the laptop and nothing is reported in the mess. Are there any ideas as to why the wireless connection works only when the laptop remains close to the modem? Thank you.

  It seems I may not have been very clear in my previous post.  I wanted to suggest was to reverse the connection of the antenna.  As mentioned in the thread I linked, the connections might have been reversed from what they should be from the factory.  If this is the case, then connect the antennas in a factory setting would not solve the problem.

  Have you tried to reverse the antennas?  If they are in the deformities, then this would fix it.  If they are in the right position, then the worst you would have (only in the deformities) would drop signal strength.

• Slow wireless connectivity with WRT54GS

  If I connect to the router with a LAN, I get ~ 63Mbps, but whenever I try to go wireless, the speed goes down between 12-15Mbps (at best). There is no update of the firmware for the router, and I am at a loss to the extent where how to get the best speed via a wireless connection. FYI, I have security WPA2 value, but I don't seem to lose a lot of speed (as appropriate) as a result of the security is enabled. I REALLY want to get the best speed via a wireless connection, but I am fairly new to try to figure out what kind of things networking, any help would be appreciated!

  The router is capable of speed of wireless connection reaching up to 54 Mbps. With today's ' Smart' technology, it would be a smart move, upgrade to a new router. Get a N router, if this isn't an AC, rather than keep the G one.

• Wireless connection is slower than the hard line on WRT54G. Why?

  I adjust the wireless connection

  Base rate: all THE

  Transmission rate: 54Mbps

  It is still slow as a wired connection. Is this because the WEP security settings?

  Best regards

  Chen min

  Yes, WPA2-AES can go up to 300 Mbps (or more) on the bands of 2.4 and 5 Ghz as long as your wireless adapter supported this speed.

• Wireless connection disappeared after pressing the button system Orange Cisco router WRT54G

  Trying to connect to a printer Dell wirless to the router and has failed, after many tests to get the computer to recognize the printer as a wireless device.  Recommended by Dell to refresh the router and I pressed the button in the above subject line.

  Now, none of my computers display the connection wireless as available. I have reset the time many cable modem and the router and him that restarted the computer and they still will not recognize the wireless connection.

  Also, I tried to use the default IP 192.168.1.1 to review my settings for the router (running a laptop directly via the cable modem), but the address keeps timing.

  What is someone out there knows what can happen to connect wireless to disappear?  Any help is greatly appreciated.  Don

  Your wireless network is gone because you press the WPS button on the front.  Never do this because you don't have the hardware to support it.  Change the SSID and password.

  Press and hold the reset on the back for 30 seconds and then release.  Wait 10 seconds and cycle power to the router.  To connect to a computer wired to the router at 192.168.1.1 only empty password, username "admin".   Now configure the router manually.

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• U940 PSU6VA satellite - wireless connectivity problems

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
  * Wireless adapter: * Intel Centrino Wireless - N 2200
  * Wireless adapter driver version: * 15.10.0.12 (which is the last for my device)

  I got this Ultrabook since February 2013, and throughout this period, I always had problems with wireless connectivity, even after a factory reset. My wireless icon varies between three States:
  * Internet access
  * Limited (in which case I can't connect to the internet or any other device on the network)
  * Not connected - connections are available (and if I try to connect to the network, it will fail)

  Sometimes my computer would instantly reach the State of "Internet access" at startup and remain in this State. Other times, it would be 'limited' for several minutes after the start of my computer before it finally connected, and even in this case, the connection will drop out every now and then. In the worst case, it would indefinitely remain "Limited" or "not connected", regardless of how many times I reset my adapter wireless or rebooted my computer.

  Until very recently, I always thought that these problems have occurred randomly. However, I noticed recently that I have always a connection perfect, whenever there is no other computers connected wirelessly to my router, and I always have problems more or less when there is at least another computer (or even a smart phone) connected wireless to the router. If there is another computer connected to the router via an Ethernet cable, this causes no problems. It's only wireless connections that interfere with my computer.

  It is only this computer that has these problems; the other computers in my house ever experience these issues, no matter how many computers is online. In addition, my computer is not only these problems with my home router; It has the same problems on the network wireless at my University.

  My question is, how do I fix? Is this a known bug or is my defective wireless adapter? I know that I can connect using an Ethernet cable if possible (I have never problems with Ethernet connections), but this is not always possible at the University.

  Did you remove the old driver Win 8 Intel of the system before you upgrade to version 8.1 to win?
  The old Wlan Intel driver could affect the performance of a Wi - Fi connection.

  The driver update page Win 8.1 says clearly that Intel Wlan driver must be uninstalled and the
  Inbox Windows 8.1 version must be used.
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm

• On Satellite L750/0 wireless connectivity issues s 5

  I own a laptop L750/0 s 5.

  I seem to have a problem with my wireless connection, where anywhere not at 10 m from the router the connection cuts in and out with the yellow sign 'limited connectivity' always appears. disconnect and reconnect solves the problem for a few minutes. Ive resorted to the close session of the router.

  the computer is 2 months old, the Wlan driver is up-to-date. power options have been configured to be on maximum performance for Wlan etc etc.

  The main thing that annoys me, it's all the others (much older laptops) in our House very much work where mine doesn't. I actually lost performance from where I can get my old toshiba portege m300 to this new wireless signals.

  In terms of information, the computer is running windows 7. Wireless network card is Atheros AR9002WB-1NG.

  If theres any other information that you need, as im sure there will be, I would like to know and ill try my best.

  The router is really new.

  Thanks for your help

  > the computer is 2 months old, the Wlan driver is up-to-date. power options have been configured to be on maximum performance for Wlan etc etc.

  The latest Wlan drivers can be found here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  Please keep in mind that you use the latest driver v9.2.0.419.0

  To be honest, I had the same idea to disable the power save for Wlan and it more often it should work are you sure that you have changed this in the same power station that is used when the laptop is running on battery power?

  However, it would be interesting to know if the Satellite L750 uses the same Wlan 802.11 standard, as do other portable
  In the Device Manager-> properties-> Advanced tab Wlan card, you can choose the standard Wlan 802.11
  Recommend to check this

• Satellite A300-1OM wirless changed connection limited

  I have problems with continued use of the internet through my wireless home network, which seems to be an intermittent problem.

  Many times while using my internet wireless connection, the connection has changed to 'connected' to 'limited connectivity', which then led to the difficulty to open the "network and sharing Center" and also "connect to a wireless network" dialog boxes, and when trying to diagnose the problem using windows it suggests only get close or restart my router wireless that I know don't work although I can use another PC toshiba laptop and surf the internet using the same router in the same location.

  It seems that the only way to fix it is to reboot the computer, open the network and sharing Center, click on the Red 'X' between my computer graphic image of the Earth (internet) allowing windows diagnose the problem and then choose 'Enable wireless connectivity' and after that the network starts to operate as usual... until he repeated the outage a few hours later :(

  The WiFi standard that your laptop uses you can check in the Device Manager > do WiFi von card right click > properties > wireless mode

  In addition, you must disable the Vista of WiFi power saving function. This document can help you to turn this feature off:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Good luck!

• Wireless connection dropping on the Satellite C660-195

  Hello

  I recently bought a new Toshiba Satellite C660-195.
  However, I have problems with the wireless connection. When I bought the laptop, it was full of all the annoying and resource hungry programs Toshiba install there. I have reinstalled Windows on the laptop, just install the drivers and software, I wanted and needed. I have problems with the wireless to stay connected. I can detect wireless networks and connect to that I want to be on, I have to add is a connection at home (I'm not fly: P).

  However, the continuous wireless connection down, becoming 'limited' as it says in system tray icon but then turns back on and the process just keeps spiraling on, on and off.

  The wireless I connect works quite well using Xbox consoles, at first I thought it might be the router but after that a second thought if found the wireless on the Xbox is fine then I surely can't be the case? The laptop is Windows 7 64 bit

  Thank you

  Luke

  I wish people would read all the postings first before creating always new posts on the themes that have been already published in the forum:
  Check this domain:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=30

  Update driver Wlan www.realtek.com.tw and disabling power saving for WLan would solve you problems.