Z10 STL100-3 no blackBerry still update

Similar Questions

• 10 blackBerry camera cannot start after Z10 STL100-1 upgrade to 10.2

  Good night

  Can someone help me please?

  I got an unlocked BB Z10 STL100-1, according to the packaging, he ran 10-0-10 Bundle 648.  I started a data plan with lime - Barbados Local carrier while putting the phone, I received a new notification software. I then upgraded to the version of the software 10.2-0.415/ OS 10.2.0.1767.

  Since the upgrade I can not access my photo app, I got the error msg "Camera cannot be started", watch videos on the video application or browser, take a screenshot.

  I tried a factory reset and reload the software link BB, also tried of wiping and formating the card memory as someone suggested it might be a compatibility problem.

  Any Suggestions?

  Update:

  Tried the update to OS 10.2.0.1803 as suggested in another thread, still no solution.  Use an automatic charger to downgrade the OS 10.1.04633. Camera works fine, no problem of media. I am happy

• BlackBerry Z10 transfer a STL100-1 Z10 Z10 STL100-2

  Hey guys!

  Just got a new Z10 STL100-2 and have problem restoring a backup STL100-1.

  Version of the OS for the Z10:

  • the STL100-1 is a v10.2.1.2941;
  • the STL100-2 is currently a 10.2.1.2141.

  You use this tool to change your terminal Blackberry Link (1.2.3.48), I get the message my device is not compatible and I need to update my device.

  BB or OTA link process say I is launching the latest version again... eh

  Update on STL100-1 was made on the same carrier a month ago.

  Any idea or suggestion to transfer data to the new device?

  TX,

  Nastro.

  OK now I have a little more time.

  The end of history

  It works!

  Just followed the advice of John:

  • Installed 2941 via ADF on CB.
  • Full of possible restoration
  • All data, applications, and the files have been recovered but the contacts
  • Tried a partial restore to local applicatio / Calendat / contacts only

  Contact finally available

  Thank you BB community!

• The Z10 blackBerry OS update

  Hello!
  I have BB z10 stl100-1 and I had never updated my device with an official firmware. I had the version 10.2.0 * and I tried to update phone, then I tried to update to link to BB, but it says I have the latest version, but I know that's not everytime. Why BB does not officially updated the device? Its a long time since BB 10.2.1 released.

  Why I can't install just the os developer or leak? Why it does not download the full official OS on the site?  I bought this phone and thought that it will be official support, but it sucks, no official update.

  Official update releases are completely at your operator, not BlackBerry. Your carrier Gets the update, then proceeds to test and evaluate it for sometimes weeks or months before you release it to you. The fact that you have not 10.2.1 surprises me because I thought he was out just about everyone now.

  A couple of things to try: remove your SIM card and disable the location Services on your phone and then plug it into your computer and go to the www.blackberry.com/update of your browser. Could provide an update. If it doesn't, try looking in these forums under "BONES of 10 BlackBerry Device Software" for instructions on upgrading your operating system.

  Keep us updated on your progress.

• BlackBerry Z10 Z10 STL100-1 and STL100-3 Z10

  Do anyone know the differences between Z10 STL100 STL100 - 1 & Z10-3? Please tell as many differences as you well know... Please... Thankx

  I don't normally send people to other sites but the Crackberry Forum has a thread on this subject and I think it explains differences quite well:

  http://forums.CrackBerry.com/BlackBerry-Z10-F254/what-difference-between-BlackBerry-Z10-STL100-1-2-3...

  I hope that helps you.

• BB Z10 STL100-3 a proximity sensor?

  Goal: Get the value of proximity.

  Question:

  BB Z10 STL100-3 a proximity sensor? If this is not the case, let know us.

  Action: I can get information of proximity such as min and max.

  However, when I run sensor_is_supported, dialog box shows that the unit is not supported.

  Mini code:

  If (! sensor_is_supported (SENSOR_TYPE_PROXIMITY)) {//not taken in charge by the device
  snprintf (msg, MSG_SIZE, "SENSOR_TYPE_PROXIMITY not taken in charge by the device!");
  show_dialog_message (MSG);
  closeshutdown();
  Return EXIT_FAILURE;
  }

  Thank you for your attention,

  Your code is wrong. Your if condition returns true is sensor of support (which is) and then executes these instructions that tell you that it is not supported. Your logic is false.

  I advice you take a look at this sample https://developer.blackberry.com/native/documentation/bb10/proximity_sensor.html

• BlackBerry Smartphones Blackberry identity update

  I searched the archives for more than an hour and couldn't find anything on this problem...

  Since I installed Blackberry App World 3.0, whenever I go to BAW it tells me I have to install a Blackberry identity update, if I say 'no' he throws me and I say 'yes', it takes about 20 minutes, with a full reboot... and then I'll come back an hour later and it me instlal once again...

  I am better I installed it at least 50 to 60 times and it's not bad, it STILL requires that I re - install again whenever I click on Blackberry App World.   It would be one thing if this installation was fast, but it's not, it requires a complete reboot and rakes anywhere from 10 to 20 minutes.

  What is the problem and how to fix it?

  Well, I finally understood the problem... when I connect the phone to the Blackberry Desktop Manager and use the Application Loader, it re - install Blackberry OS software, roll back to an earlier version, which requires a reinstallation of the recent Blackberry identity update.

  So, the solution is not to use Blackberry Desktop Manager.  Solved!

• Windows 7 home started an update on 5/10 which were 19 updates. 10 hours later it is still updating.

  * Original title: last update of Windows 7

  Windows 7 home started an update on 5/10 which were 19 updates.  10 hours later it is still updating. It seems that it is locked on the number 16.  How to exit the update?  What should I do after that?  I understand the update KB3004394 could stop other updates of the installation.  What is the problem?

  Hi James,

  Thanks for posting your query on the Microsoft Community.

  As described in question, it seems that you can not install updates and it get stuck at 16 of 19, this problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  If it helps, try the methods and check them off below.

  Method 1

  If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2

  Step 1

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Step 2

  Try to follow the steps in the Microsoft Article and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Dev Alpha B OS blackBerry 10 update

  Hello

  As Blackberry Dev 10B Alpha is out, can we get the operating system updated to RIM for our current BlackBerry 10 Dev Alpha I got Jam BB?

  Yes you can get the updates here.

  Alpha Dev OS blackBerry 10 updates

• BB Z10 STL100-3 has a function of the temperature?

  Goal: Get the value of the temperature.

  Question:

  BB Z10 STL100-3 has a function of the temperature? If this is not the case, let know us.

  Action: when I run sensor_is_supported, dialog box shows that the unit is not taken care of.

  Mini code:

  If (! sensor_is_supported (SENSOR_TYPE_TEMPERATURE)) {}
  snprintf (msg, MSG_SIZE, "SENSOR_TYPE_TEMPERATURE not taken in charge by the device!");
  show_dialog_message (MSG);
  closeshutdown();
  Return EXIT_FAILURE;
  }

  Thank you for your attention,

  The Z10 does not support the SENSOR_TYPE_TEMPERATURE.

• BlackBerry software update 10 10.3.1.1779

  Hello. I use a Q5 and recently received a notification of a software update required 10.3.1.1779. The download process and the installation went well. The problem is when my unit wants to restart. It restarts every time, it stops immediately and restart again. It would happen a few times until the screen BLUE before stopping with the red LED flashes.

  These are things I've done:
  1. charge my camera
  2. hold the power button
  3 press and hold both volume buttons
  4 connect my device BlackBerry link and reload my camera

  Only the figure 4 turn on the device. However I did it for about 5 times since the software would automatically update and ask for a reboot. It worked fine when the update has not been installed.

  Yesterday, I tried again and got my solution.
  Solution:

  1 install update on phone (do not restart yet)
  2. connect the phone to the pc
  3. install the blackberry link update
  4 reboot the phone when it is connected to the pc

  After that my phone worked normally again

• BlackBerry Smartphones Blackberry "BOLD" updated

  Hello, I bought my first blackberry a few weeks back and so far I'm in love. How ever I have one question that I havn't found another answer anywere so I registered to post on this.

  I synchronize my "BOLD" between 2 computers both running Desktop manager 4.7 but they say that the bold is software update required before each synchronization. Danish range of Blackberry messenger update same suggestions. Also both pc suggest different upgrades. At first I ignored it, but then I thought that I click on update, but when I did, he went through the entire course of the upgrade and at the end, said that the "BOLD" had not enough memory for the update

  I checked the two "BOLD" memory and SD card for memory card and it said:

  Aplication free 18.7 MB of space

  The device 857 MB free memory

  Map of free memory 1.2 GB of free space

  Any ideas? I'm doing something wrong?

  Thank you

  No, you don't do anything wrong.

  Look at the Options > about, third line down, starting with a 'v.4.xxx '.

  ********
  Updates are available from other carriers to upgrade your BB. It will work find if you follow the instructions exactly as published in the instructions given in the following link.

  Perform a full backup of your device (using the Desktop Manager) before the upgrade process.

  http://www.BlackBerryForums.com/General-9000-series-discussion-bold/176753-latest-OS-9000-4-6-0-373-...

• Z10 BlackBerry Z10 STL100-1 update blackBerry than BlackBerry Maps 10.1.0.805 install failed

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.1.0.273
  OS version: 10.1.0.1720
  Carrier: Beeline KZ
  Country: Kazakhstan

  1. Update for BlackBerry Maps downloaded but not installed. What can be the problem?

  2. the maps are not available for the Kazakhstan now. When do you intend to run this country's support?

  Thanks to you all. In update 10.1.0.808 has solved the problem

• BlackBerry Z10 when are you planning to update Z10 STL100-1 version 10.2 to the Kazakhstan?

  Device: BlackBerry Z10
  Model: STL100-1
  Software version: 10.1.0.273
  OS version: 10.1.0.1720
  Carrier: Beeline (KZ)
  Country: Kazakhstan

  Worried beforehand because that had problems with upgrading to 10.1 and my mobile operator is not able to help.

  The problem has been resolved in 10.2.1.2977 update.

• BlackBerry Blackberry Software Update Fail on Z10 10

  Hello world! I am trying to update the latest version of the software on my Z10 using WIFI BT, but he arrived at 34MO and continues to be paid to "interrupted update", I did that there is enough storage space in my camera but still the same events. It makes me crazy! Someone else had this problem? Have you found a solution? Any comments will be greatly appreciated.

  I recommend not preforming a more air day because they tend to miss from time to time due to the fall of the signal. I recommend using the BlackBerry link to device software update, so there were no interruption as long as the usb cable is not disconnected.