22 on 1218nfs MFP scanner error

Similar Questions

• M177fw MFP Scanner Error 22

  I too have a color LaserJet Pro MFP M177 which gives the same "Scanner Error 22".

  Hello

  See the link below.

  http://support.HP.com/us-en/document/c03754266

• HP Color LaserJet M177fw MFP Scanner Error 22 Pro

  Bought this product today. 3. analysis later, 22 Scanner error. I have consulted the troubleshooting basic guide. Product unplugged for 15 seconds, no improvement. Updated firmware to update, no improvement. Very discouraging to buy something and it fail on me the same day... Help please.

  Thank you!

  I'm ready now. I returned the product to the retailer. Upgrading to a different model, and yes it's an HP. It was a much better option because HP would not have replaced my unit with another unit AGAIN, it would have been updated. I feel like a complete jerk to study does not comment on a product before buying it. HP has a very good line of printers, seems just that this model has had its problems.

  Thank you.

• HP Color Laser Jet MFP M177fw Pro - Scanner Error 22

  I get the same Scanner Error 22 on the Color Laser Jet Pro MFP M177fw like many others have posted.  Tried uninstalling\reinstalling the software and tried the most common loading drivers but Scanner error prevented this piece of finish.  Support and I was told we would have to pay $49.95 for them to help us solve the problem.  We just bought this printer 5 weeks ago.  Is this all we can try?

  Thank you!

  Thank you for your response. This solution does not solve my problem. HP customer service had travelled me several tests (took about 20-25 minutes total) but ended up sending me a replacement printer. It arrived within two days and so far, the replacement works great. HP has also paid to have the original shipped in return. The process was fairly hassle.

• CM6040f MFP: Failure scanner error CM6040f 30.01.08

  Make failure scanner error 30.01.08

  "Can anyone show a picture or describe where the scanner" locking "is?

  Aparantly I need to ensure than that in the "unlocked" position

  Thank you

  Look under the scanner and adf table-

• HP Laserjet Pro M176n: 22 Scanner error and error of WIA

  I have two problems with my HP laserjet pro m176n. He continues to display an error scanner 22. If the error 22 disappears after resets repeated, the scanner is not scanning. The mistake this time is unable to communicate with the scanner. Using the scan HP and printing doctor gives an error of WIA. I tried all the reset options.

  Hello

  A 22 Scanner error indicates a hardware failure.

  Once the error of compensation, can you managed to make a copy form the device?

  If you can not make a copy, the error of WIA is not related to the problem at all, but the scanner is not working.

  If you are able to make a copy, check the following on your PC:

  In Windows Explorer, click with the right button on "This computer", and select manage.

  Select Services and Applications, and then click Services.

  Open the properties of the Windows Image Acquisition (WIA) service, then the Dependencies tab.

  See the Hardware Detection kernel as described below or may service only the RPC Service is indicated?

  

• Re: Printer Laser Color CM1312nfiMFP Scanner Error 5 on the screen

  I need help to fix the message display, Scanner Error 5. I have read in the car online troubleshooting and tried to fix the problem as suggested - turn off the appliance for 30 sec and turn it on. Furthermore, tried another step to plug the power of the machine directly into the wall outlet to completely instead of a power strip surge protector. On turnng the power on or in the machine is the initialization of noise comes. It's wireless printing even when do a paper copy, the sound comes. The part of the scanner to copy and light seems to be also does not work.

  Hello @CHP1,

  I understand your concerns. Unfortunately, for this type of printer, I need you to lead our Enterprise Business Community Forums. It will be the right section for this problem. Good luck.

• LaseJet M1132 MFP scanner has stopped working.

  LaseJet M1132 MFP scanner has stopped working (printing and copying are OK). HPPSDr.exe starts the test and repair, but it will not end. Reinstalling the HP software did not help. Windows XP SP3.

  Solved. I've replaced the USB cable by a new one, such as recommended by others.

• HP LASER JET P1102: Scanner error Laserjet P1102 52.0 Professional

  Hi, I need some help or advice I can't use my printer 3 months when I try to print I get an error message like this "scanner error of 52.0!"

  I want to find a solution for this problem!

  Hi @CAMARAIZ,

  In addition to my post, if you are unable to print the 'Page or report Configuration' there is a hardware problem. Try the hard reset and if the problem persists, contact HP.

  Contact HP for service in all countries except Asia-Pacific.

• HP Color LaserJet M476nw MFP: Scanner reported an error - HP Color LaserJet M476nw MFP

  I had problems with the HP scanning software.  When I run the software and try to initialize a scan, I get the message

  =====

  Scan reported an error

  HP Color LaserJet M476nw MFP is currently unavailable. Please check if it is connected and turned on, or try again later.

  =====

  In fact, the scanner works fine, like I can scan documents directly to the USB port on the printer.  The scanner has worked in the past with the HP software on my computer, but now just won't work.  The printer is also properly connected to the computer as I have no problem with printing of documents.

  No idea how to fix this?

  Thank you!

  Hello

  Try to install the following package to make sure that your drivers are perfectly up-to-date:

  https://support.Apple.com/kb/DL907?locale=en_US

  Then restart your Mac and try to scan the image.

  If the same persisnts open the JSCA-Packard folder and move the HP scanning application to the trash.

  Then install the HP Easy Scan app instead (which is the latest version of HP scanning):

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try scanning using the application and check for the difference.

  Please let me know the results,

  Shlomi

• HP LJ M1530 MFP Scanner - scanner not seen

  I recently replaced my HP LJ M1530 MFP with a new HP LJ M1530 MFP... even at the same.

  I guess it was stupid to think that the computer accepts just the new machine...

  I reinstalled the drivers and cannot scan. The first time around, installation included the driver of the scanner and let down the HP Scan icon on my desktop. As a new icon does not appear, I clicked on the former. Now, I get a pop-up asking me to choose between scanning HP LJ M1530 MFP Series and HP LJ M1530 MFP series #2. Neither one works and each generates error messages.

  I need all version of models of the instructions to clear the wrong information and configure the scanner.

  Help me Obi Wan Kenobi...

  Hi PJStarr,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that replace you the printer but cannot scan.

  I'll be happy to help you.

  What is the full name of the printer? LaserJet Pro M1536dn?

  I would like to do a complete uninstall and reinstall a new copy of the software and printer drivers.

  Disconnect the USB cable if you configure the printer on USB connection.

  Uninstall from the CD:
  Go start, computer, right click on the CD for the printer, left click Open in a new window, double click on uninstall.

  OR

  To uninstall program files:
  Go to start and select a computer.
  Select the C drive.
  Select the program files or program files x 86.
  Open the HP name and printer folder.
  Select uninstall.

  Reinstall the software but do not connect the USB cable until you are prompted.

  (if you are using an Ethernet connection you would like that he connected before running the installation)

  Please provide the following information so that I can better help you.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB/Ethernet)

  Let me know if you were able to install the software of the printer successfully and can now print and scan.

  Thanks for posting on the HP Forums.
  Have a great day!

• HP Laserjet M9050 MFP: Scan error Code 30.01.16

  I have a HP Laserjet M9050 MFP Firmware: 51.051.4

  The printer was woking fine so far, but played upward...

  I get an error Scan on the screen 30.01.16 Code, have searched online and this indicates that the scanner ADF need of recalibration.

  Normally the 30.01.16 error code will remain on the screen, but if I take off the cable behind the scanner it-displayed meaning I can access the control panel and enter the menu etc.

  I tried to re - calibrate the, but it doesn't seem to work, someone has another idea about what it takes to solve this problem.

  Hahaha...

  Be sure to save the configuration when you do something.

  Well, the solutions were:

  (1) printer tour

  (2) remove trainer card and unplug the hard drive

  (3) re - connect trainer Board and open the ADF tray, printer

  4) go to Services, then calibration width ADF and calibrate as on-screen instructions.

  (5) DON'T FORGET TO SAVE THE SETTINGS.

  (6) turn on the printer and remove trainer card and reconnect the hard drive.

  (7) once who did everything turn on the printer again, and everything should work without an error.

  Note: If you get the error when the cable step 3/4 remove scanner then plug back in.

  Fixed and working again.

  This can close close...

• HP m127n MFP: HP m127n MFP install error no pdf

  I had the machine on a network and works very well. My admin lost the connection therewith for analysis, I checked the connections restarted the machine and turned off the printer and back. It printed fine but stil of the scanner had a problem.

  I deleted the printer and tried to re ad, I'm now one an error at the end of the software load, it will not be completed.

  I get only printing function and limited scanning optins as it will not load the software for the machine total. I HAV etried scan doctor

  and he says that I'm missing software and tries to load it but also gets an error.

  I'm stuck,

  I read to try to remove from the disk and then reload I still did. I have the original software disk, but as I said it will not charge.

  I had problems when I bought it first a year ago, but I don't remember exactly what it was or how I fixed it.

  We had little scanner;

  We also have a small desktop users 4 to the scanner and a few other printers on the network. We are also bound

  through a router to our company for internet access servers. Windows 7 Enterprise 64-bit machines

  I would appreciate any help you can give me

  I finally found myself.
  Has installed the software using the disk but it never removed from the program in the system.
  It not was not in the hp file so I thought it was gone.

  I used windows to uninstall. It Manager
  Correctly.
  I also had another printers mfp on the machine software. This machine has been charged, but the computer has been looking for her all the time.
  So, it was also part of the problem.
  I deleted the old drivers and the scanner issue seems
  To solve. I think that the ws original problem he was looking for another machine
  And we missed it.

• HP LaserJet M1530 MFP: HP LaserJet M1530 MFP reinstall errors to 99%

  We are able to get printing to work, but what we want is that the scanner part work. I tried following the instructions posted in another post that we so that the software is installed, update the driver in Device Manager to use the HP LaserJet M1530 MFP PCL.

  There is also no in the same way, a lot of minutes sitting at 99%.

  Someone at - it of the other Councils, a 'solution' to reinstall the operating system.

  Thanks for providing this information @rbro.

  Yes, you can run the uninstaller from here. Make sure you unplug the USB cable first.

  Try the procedure described in this document for the 1618 error HP monofunctional and printers multifunctional - Fatal Error ' fatal error 1618' (MSI error 1618) displayed for HP Software Installation in Windows. .

  Please hold me. Thank you!

• LaserJetPro MFP M127fn: Error scan 22

  Im getting error Scanner 22 at the start of the device.

  Ive tried powercycling the device as well as the doctor of printing and scanning.

  I'm glad the reset got it sorted.

  If you can, would you mind clicking on accept as Solution below my original post? That will help users of the forum to find the solution in the future, and if they know to request the reset I can provide it their in private messages.
  
  Thank you and I hope you have a great weekend!