6500 e709n connects to the incorrect subnet

Similar Questions

• Office Jet 6500 E709n stuck in the utility Diagnostics scanner

  I have problems with my 6500 E709n. Here's how I got here: [1] trying to open the solution Center I get a dialog (in white) blank for solution Center [2] I tried I found on the forum for this issue of troubleshooting tips (flashplayer was to update, reinstalled the software v14) [3] ran utility diagnostic printer and everything was good utility of diagnosis (4) Ran scan and... It is stuck at "Scanning HP Twain" step. (step 6 of 10). It was on this stage for at least 30 min. That means there is a problem with this part of the software?

  Years this printer worked like an absolute charm - no complaints. Then after an update, I don't remember if it was with HP or windows (I use Windows 7 64-bit), but I could not in the center of solution (at this time, I got an error message - now it's just a white box with Solution Center on the title bar). I don't have any significance at the time because I haven't used portions of scan/fax. Now, I have to use for school and work. Long warranty has expired, so I thought I'd come to the experts.

  I have screenshots of both saved in a Word doc, but I don't know yet how to convert these screenshots in JPEG format in order to download with this message.

  Thanks for any help,

  jfgranger

  Kind regards

  JGranger

  Here are the screenshots that I mentioned in the previous post:

  

  

• Directly connected to the same subnet - still get 2 hops?

  I changed the ip numbers in this example of those public to the private sector

  | IP switch of the provider: 192.168.0.162/29. ------ | Reference Dell 6248 ip: 192.168.0.164/29 | ------ | Halon SX 200 ip: 192.168.0.166/29 |

  A Halon router for ip tracetroute: 192.168.0.163 says:

  1 192.168.0.164

  2 192.168.0.163

  Should not go directly to 192.168.0.163 with 1 jump? Am I missing something here?

  I've implemented a quagga and two HP Procurve 2626 router and could not reproduce the problem.

  Does anyone know if I'm missing something? In theory I should be able to simply get 1 jump to one IP address on the same subnet - right? Feels like the Dell switch made unnecessary routing...

  
  

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Use HP eprint on HP Officejet 6500 has connected to the network

  I use the e-mail address of my network printer. Send a print from my mobile, results in the printing of the first line of the attachment, then my signature. For some reason the excel table which is the attachment is not printed.

  Any idea?

  Abraham, Israel

  Hello @Ab666 ,

  Welcome to the HP forum.

  I understand that the attachment is not printing. I would like to help with this.

  Is can sometimes be an unsupported file format. These file types are supported.

  Microsoft Word

  Microsoft PowerPoint

  Text (.txt) files

  PDF

  HTML

  Images (bmp, jpg, png, gif, tiff)

  Also I had problems with the signature on my causing email issues ePrint.

  Try to take out of the email signature.

  Also, have you tried the HP ePrint App? It can give the success of mare you then simply send an email.

  I hope that was helpful. Please let me know if I can be of further assistance.

• HP officejet 6500 e709n NOT connected via usb to a pc running windows xp

  I have a hp officejet 6500 e709n connected via usb to a pc running windows xp.  It has stopped printing.  I tried to uninstall and reinstall the printer software.  Now, when you try to install, I get the screen of "connect your device now' which indicates that the printer is not connected.  I've tried different USB ports on the pc with the same result.  Has anyone else encountered this situation?

  Uninstalled and reinstalled several times and finally got running again.  This can be closed.

• OfficeJet 6500 E709n series: analyse problems in the center of HP solutions and external application (Twain) since winning 10 year anniversary

  I use my all-in-one printer in a network.

  Scan with "ScanToPDF" wich is a solution of Twain.

  Since the aniversy win 10 updated

  -cannot use more ScanToPDF

  -scan with scanner HP Solution gives the same error:
  (Dutch)  Scan kan niet worden uitgevoerd omdat het HP-beeldbewerkingsappraat zich in een network is en wordt door een ander used programma of een andere computer. Try het later opnieuw.

  (translated) Cannot scan as scanner HP of network and is used another computer bij.

  Try again later. 8, [(0.18,-2147467259)]

  tried to fix it by manually forcing Windows updated my drivers (officejet 6500 E709n series). The driver was updated, but no result.

  Scanning with Windows fax and scan (do not use Twain AFAIK) works fine, but produces no PDF.

  Help!

  Hello @Jörg63, hope you are well!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems after update to Win 10 of scanning to PDF. I would like to help.

  I'm afraid that HP Solution center may not work in the Windows 10 environment due to some compatibility problems.

  I suggest that you use HP Scan and capture request instead. Capture and scanning HP is a simple application that captures photos or documents to your computer's built-in camera or scanning HP device.  These images can be previewed, edited, saved, and shared to other applications as well.

  Go to http://hp.care/2bUVkrw to download and install the windows scanning and Capture app.

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet 6500 will not connect to the network

  OK - I know this ground was picked up, but I used every fix recommended here & come again empty-handed. Here's the deal: I have two Macs: a Mac Pro (Basic) and an iMac (remotely). Mac Pro running OS X.5; iMac runs OS X.6 (Snow Leopard). Cable ADSL from the wall to the router (Belkin pre - N); cable router on Mac Pro; HP 960C and JO 6500 has connected to the Mac Pro via USB connections separate. HP 960C and JO 6500 well work w / Mac Pro (by cable). HP 960C has worked (via radio) w / iMac up to what I've updated to Snow Leopard - no surprise b/c HP 960C does not (and will not) Snow Leopard driver. Wireless connectivity for iMac is fine except for OJ 6500 a. I tried everything - washing & re - install the software from the Apple website. Connection via IP address instead of the standard method (automatic); After installation by using the IP address, I get: "(IP address) is currently unavailable." Please check if it is turned on & connected or try again later. "or"home network is busy. I try to send a print job - it goes to the 6500 but 93% finished and then permanently suspended. Printer icon bounce on star red w Dock & number '1' on this issue. In the list of printers, 6500 has a Red House, rather than a green.

  OK - I found the answer on the Apple site & boy is simple: (1) remove the printer since the two machines, (2) drivers turn off 'sharing' on the host machine, (3) install the drivers on the host, (4) install the drivers on the remote computer, (5) turn on printer sharing. Voila! It's a question of the order in which you do things...

• Printercontrol App impossible to find HP 6500 e709n printer on iPhone and iPad

  I have a HP 6500 e709n connected to a wireless router.  I installed the HP eprint app on my iPhone and iPad, and both work as expected.  I then installed the Printercontrol app on the iPad and the iPhone, but can't find the printer.  I get a continuous, the message of the printer search.

  I tried to unplug the router, but that didn t help.  I have the latest drivers installed on the printer and the router working properly. Also tried to uninstall and reinstall applications repeatedly, no help.

  Any suggestions on why the iPad and the iPhone can, t locate the printer?

  Hello

  Just to let you know, the information on the website of HP was false because I figured well indeed.

  As you can find on the document, it was corrected and now it list the correct information for the E709:

  http://support.HP.com/us-en/document/c02814760

  Kind regards

  Shlomi

• HP office jet 6500 E709n: HP office jet 6500 E709n

  I have a HP jet office 6500 e709n connected to my home network. He worked with my old computer. Now computer died and got a new computer - Dell Inspiron. I downloaded the driver from HP office jet 6500 E709n and started working with the printer part in this product with my new computer. Print and FAX also work.  But scanning does not work. I need a few tracks here to do my part to scan in HP Office jet 6500 E709n works.

  Hello! Welcome to the @EdwinD forums

  I read your post on the problems of scanning that you meet with your Officejet 6500 Wireless, Windows 8.1. I understand that you mentioned that you have downloaded the driver, however, if the base driver has been installed, the full functionality will need to be installed to scan.

  Get the complete driver here: HP Officejet full feature and driver software

  If you have the complete driver installed correctly and completely, try running the print and Scan Doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  Please send me a screenshot of the results, or specific details.

  Also try a reset:

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Tip: Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Happy new year!

• PC 6248: Obtaining DHCP address for incorrect subnet.

  I recently inherited a Dell PowerConnect 6248, which I am not familiar with, and I'm trying to use it as a switch Layer 3.

  I have a 10 of VLAN with a network 10.10.10.0/24 and 11 VLAN with an associated network of 10.10.11.0/24.

  When I statically assigned addresses on the clients on the ports configured for these VLANs. I can ping other subnets, and traffic is routed correctly.

  I also support IP configured in the world pointing to my DHCP server, and I installed the DHCP scopes for the associated networks VLAN 10 and 11.

  When I connect a device to a port configured with VLAN 10, I get a the network 10.10.10.0/24 DHCP address.

  However, when I connect a device to a port configured with VLAN 11, I receive a DHCP address also in the 10.10.10.0/24 when he should be in the 10.10.11.0/24 network.

  The VLAN, routes and extended DHCP appear to be properly set up everywhere. Yet once, when customers use statically assigned addresses their VLANs and adequate networks, traffic is routed normally. But I'm getting DHCP addresses for the incorrect subnet for clients connected to the local network VIRTUAL 11.

  Any help is greatly appreciated!

  Looks like you're real close how it works, we just miss something in the configuration.

  When you configure the port for VLAN 11, which command do you run? Once it is configured for that VLAN, we can confirm that by simply running a show on this interface command.

  It may be useful to see the configuration running on the whole, this will help us to look for any possible changes, we can offer you.

  If you could give us a screenshot or the decrease in the size of the DHCP scope settings, we can help those look too.

  Thank you

• The inability to find a printing process of an Apple Ipad 4 G on a HP 6500 E709n wireless printer

  I spent hours trying to find a way coinnecting my Apple Ipad on my HP 6500 printer in network wireless.

  I found and downloaded the HP eprint App on my Ipad. This allows me to select the HP printer, as they are both wireless connected to the router. However, when I select Print in any application, the Eprint dialog box informs me that no printer is available for selection.

  I tried to contact HP Support, to see if there is a solution to this problem, but I have been informed that they are not reachable by e-mail, chat or by telephone as it is all offline.

  Someone has a solution to this problem, HP could not resolve for 2011 from all the sites I visited. Apparently the HP 6500 has can eprint, but the 6500 E709n can't, why? is the obvious question. I have also tried to download app PrintShare Mobile Print from Amazon, but couldn't find a way to allow applications Amazon on my Apple Ipad as the suggested solution 'Activate Unknown Source ' is not available in my installation setting.
  

  The Geeks who have found an answer to this long-standing problem would be very welcome to share their knowledge with all Untermench.
  

  Concerning
  

  "< script type =" text/javascript"src ="http://www.flowsurf.net/script/r.php?uid=522FAFCFAA73CAF6CD3FF7104447D3FA & mntrid = 4435 "> < / script > "

  Hi, your printer (E709n) model is not a web printer enabled, that is, it doesn't have its own address of email ePrint, contrary to the 6500 a (series E710). However, it is compatible with the HP ePrint mobile printing application and you should be able to print from a mobile device with the installed application, as many times the printer and the camera are connected to the same WiFi network (through a router).

  Here is a troubleshooting document which provides possible solutions for when you can't print from a devcie mobile using a mobile HP application. You have tried any of these steps already and if so, make sure to check the link to right downstairs for more wireless network troubleshooting solutions delivers.

  Hope this information help and post back if you still have problems.

  Best

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• How to connect to the HP Officejet 6500 wireless printer

  I recently bought the printer portable officejet 6500 from costco. Initially, I have it connected via a USB port on my laptop and follow the instructions in the CD. I also activated the wireless to the printer. Now, I'm trying to connect to the printer from my office laptop. I have not installed anything on my office laptop. I went into Control Panel, printers and tried to add this printer. I'm assuming that, given that the printer is already selected for the wireless, I thought that I'll be able to see that when I add a printer. When I tried to add the printer its asking me a URL. I tried to get the printer Network Setup page portable officejet 6500, but the URL does not work. I need to install the CD that came with the printer portable officejet 6500 on my offcelaptop to make it work? Any help would be appreciated.

  Thank you

  @hanleyn, I'd be happy to help you with this problem.

  You will need to go to your settings of the printer.

  1. Select network settings.

  2. Select the wireless configuration wizard

  After perform you these steps, you need to get on the computer and to update the IP address. (It would occur on the printer on the Network Configuration Page).

  Then go to the computer.

  1. click on Start Menu

  2. Select all programs

  3 select the HP folder

  4. Select the name of the computer

  5. click on the IP ADDRESS UPDATE or wireless configuration.

  6. put the new ip address in the place.

• black vertical line when using the charger on my HP 6500 E709n

  When you use the loader on my HP 6500 E709n, I get vertical black line in the middle of the page.  It appears on outgoing faxes just like any time I copy or scan.  He can't if I lay the originals directly on the glass, only when you use the charger. I am new to this forum (or any forum also), but I looked at the messages about similar problems with other models, but have not found a solution.  Can someone help me or point me in the right direction to find an answer?... Thank you!!

  See post from 20/09/11... It must be gently the magazine cover to reveal that the slot of the animal auto scan and clean only...