Similar Questions

• Problem of IEEE2 SRQ with METCAL

  I know it's related problem sets / Cal and I should ask community Fluke Metrology for this - but just in case someone here has a solution or a similar problem...

  Problem: new procedures TAKES / CAL by using the IEEE2 or SCPI commands cause SQR expect mistakes. Analysis of National Instruments with GPIB bus capture OR Spy software indicates that PUTS / CAL tests for TestSRQ (1, FALSE (0)) and forever (about 300 000 times before giving up). Change the SCPI commands to plain IEEE work very well (they don't seem wait unit SRQ at all). The tested EHR must be entirely consistent 488.2 (for example. Agilent oscilloscope DSO8064).

  A trial was conducted with the following set up:
  MEETING/CAL 7.2.51, editor in Chief MET / CAL 7.20Z
  Procedure: Agilent DSO8064A: (1 year) WORM 9500 CAL, 1Hd, DMM
  version: 2007-11-06 revision: 1.2

  Example of order of the procedure:
  1,016 SCPI * RST

  Correspondent captured bus traffic:

  1 ibtmo(0, T10s (13))
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:12.625 call duration 00:00:00.000
  ibsta: 0 x 170 iberr: 11 ibcntl: 0(0x0)

  2. send (0, 0 x 0012, ' * RST; ") * CLS; * SR. "40 (0 x 28), DABend (0x02))"
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:12.625 call duration 00:00:00.000
  ibsta: 0 x 168 iberr: 0 ibcntl: 40(0x28)

  3 Send(0, 0x0012, "*OPC", 4 (0x4), DABend (0x02))
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:12.625 call duration 00:00:00.000
  ibsta: 0 x 168 iberr: 0 ibcntl: 4(0x4)

  4 Send(0, 0x0012, "*ESR?", 5 (0x5), DABend (0x02))
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:12.625 call duration 00:00:00.000
  ibsta: 0 x 168 iberr: 0 ibcntl: 5(0x5)

  5 Receive(0, 0x0012, "1.", 511 (0x1FF), STOPend (0x100))
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:12.625 call duration 00:00:00.406
  ibsta: 0 x 2164 iberr: 0 ibcntl: 2(0x2)

  6 TestSRQ(0, FALSE (0))
  PID: 0x00000F14 ID of Thread: 0 x 00000624
  Departure time: 10:33:13.062 call duration 00:00:00.000
  ibsta: 0 x 164 iberr: 0 ibcntl: 2(0x2)

  (6 300 000 times repeated before giving up to PUTS / CAL)

  Do you have suggestions on how to solve this problem.

  Sincerely
  ___________________________________________
  Miikka Raninen
  Technician
  Accredited calibration laboratory
  Finnish companies material Command

  Checked line 10 with a multimeter on the GPIB cable. He was cut inside the connector and no one scored as such cable. They've done this week.

• I'm checking accessibility writable EEPROM and calibrated... is possible outside the laboratory?

  I'm checking the EEPROM of nonvolatile calibration of the PXI-6115 controller card is accessible only by technicians of the calibration.  It cannot be written to or altered in any way.  The letter of volatility indicates she has 4 k x 8 bits of access read/write nonvolatile, limited API.  Only 5 bytes are available. for user-defined (custom) data.  Does this mean that the API and the 5 bytes are PW protected and cannot be customized by the technicians of Calibration or does that mean that they are available for anyone to write and record on the map?

  I also try to check the information even for the PXI-5411 and PXI-4060 cards as well.

  Hi JenW-

  The 5 bytes of "user-defined information" are writable by anyone with access to the device through NOR-DAQmx.  In LabVIEW, you can write (and read) these bytes via the calibration information property node.  In the C interface, there is a corresponding attribute to write and read the same thing.  The rest of the EEPROM content cannot be changed by the calibration software and not can be written or read directly through NOR-DAQmx.

  I hope this helps.

• Make a translation specific LR of monitor in the laboratory?

  I am new to Lightroom and did not dare in PS again. I just upgraded from a Mac Book Pro, iMac. I have a calibrator screen Spyder Pro5 and I used it to calibrate my monitor. Thinking that I was ready, repaired a few photos of the beautiful landscape (shot on Nikon D810 in RAW) and exported and then uploaded to the Photo of the Bay. Impressions approached back on color by far on the density. After a few emails back and comes with the support of the Photo of the Bay, I had the note below. Clearly, I don't want to give up my iMac nine, so there the advice of others to help me?

  Bay Photo e-mail:

  We do not recommend using Apple-brand monitors for calibration printing. They are designed to make the images on-screen pleasant to the eye: contrast, saturation high and bright. The result is the user in compensation because of these attributes - the images on the screen will appear always brighter and more vibrant color correction-no prints will be.

  Here are some recommended monitors:

  Recommendations:

  EIZO ColorEdge series, starting at ~ $1000
  NEC - P, PA - or SpectraView series, starting at ~ $600
  Series ASUS PA, from ~ $400
  Dell UltraSharp PremierColor series, starting at ~ $500

  In general, a good monitor, designed for a rendering of the colors accurate, must have the following characteristics:

  Resolution: 1920 x 1080px or better (16:9 or 16:10 aspect ratio)
  Contrast ratio: 1000: 1 or better
  Color support: 1.07 billion colors or more
  Viewing angle: 178 ° or better

  The little Apple monitors is pure BS! Your problem is your laboratory whose color is not very successful (bet that they require to send you documents to sRGB; awful).

  You want to match a print view, here is a video to walk if she. Yes, Eizo and SpectraView are a reference display system much better that what Apple offers, but you must all properly calibrate them for a match. Also consider using a picture of color like this reference: http://www.digitaldog.net/files/2014PrinterTestFileFlat.tif.zip and http://www.digitaldog.net/files/Gamut_Test_File_Flat.tif

  Why are my prints too dark?

  A video update of a piece written on the subject as soon as 2013

  In this 24 minute video, I'll cover:

  Your impressions are really too dark?

  Calibration of the screen and WYSIWYG

  Viewing print conditions

  In case of problems to get a match

  Avoiding the hacks who do not resolve the problem

  High resolution: http://digitaldog.net/files/Why_are_my_prints_too_dark.mp4

  Low resolution: https://youtu.be/iS6sjZmxjY4

• Yellow/green Cast in Photoshop CS6 after calibration of the Retina display

  I use a MacBook Pro with screen Retina and color eyes display Pro with colored eyes to calibrate my monitor.  It works perfectly, except that when I open Photoshop (or even the Adobe updater now), the entire screen goes clear green / yellow!  See the attached photo, it is quite nuts and give you a headache after a few seconds to look at it.  I tried the turn of thought of treatment GPU, it would conflict with that and a dozen other small attempts to get rid of him and nothing!  I'm finally back to calibration by default for the Retina display, and it's not that bad, but obviously not yet calibrated.  I can't for the life of me find someone else who has this problem, I'm crazy?

  Thank you!

  

  Well, then, I really only reported it because I thought that maybe in the future someone else would have encountered the same problem.  I found the solution!  Color eyes Display Pro spits like a version 4 ICC profile and the LABORATORY made 16-bit file.  It turns out that is not compatible in some way (would love and technology Adobe answer for me is - what GPU or something else listen here?).  Fortunately, there is an option to change color eyes Display Pro.  I changed it to "Matrix based" instead and voila!  Here is a screenshot from wherever the option is, just click on "profile"parameter and change the second drop at the base of the matrix.  ICC v2 has not worked for me either, any program that crashed.

  

• The compass is out of 90 degrees. Is there a software patch or calibration for this?

  The compass is out of 90 degrees. Is there a software patch or calibration for this?

  See section reset or disable location Services of privacy and location in 8 and later - Apple iOS Support Services. Back to zero must recalibrate the compass.

  TT2

• SRS Iwowe Premium laboratory + itunes 12.5.1.21

  Hello

  My SRS Iwowe laboratory plugin no longer works with the new version of iTunes 12.5.1.21!

  SRS Lab was bought by DTS and no way to find support for this plugin today!

  Can someone help me?

  I love this plugin that greatly improves the sound.

  Thank you very much

  Laboratory of SRS Iwowe Premium + itunes 12.5.1.21 no longer works since the upgrade.

• Calibration of logical keybaord

  Hello! I tune my guitar to 432 Hz. I was wondering if there was a way to change the logical setting/calibration of the on-screen keyboard / musical typing to match. Thank you!

  Yes:

  

• The monitor HP 2207 color calibration

  The color on my screen calibration option doesn't seem to work on this monitor. How others have calibrated their monitor so that the printed photos corresponding to the image on the screen. I've been watching Spyder and Eyeone calibration thingys but she tips appreciated. Thank you.

  This article from hp can help:

  http://support.HP.com/us-en/document/c00850059

  Maybe try to install the latest versions of software and drivers:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & Product = 3363837

  Maybe your manuals for this information?

  http://h10025.www1.HP.com/ewfrf/WC/manualCategory?LC=en & DLC = in & CC = US & os = 2093 & Product = 3363837&

  You may need to update your video driver PC?

• I'm trying to calibrate a NEC monitor connected to my iMac end of 2014 running El Capitan.  Spectraview calibration software, does not recognize the NEC monitor.  Suggestions?

  I'm trying to calibrate a NEC monitor that is attached to my iMac end of 2014 El Capitan (10,11.4) running, the calibrator (Spectraview) is a dedicated to the NEC calibrator.  Unfortunately, I can't get Spectraview to recognize the NEC monitor.  Any suggestions?

  I looked on the NEC site and haven't seen El Capitan compatibilities listed.

  http://www.necdisplay.com/support-and-services/Spectra-view-II/compatibility#Mac h_os

  You should contact the support of NEC.

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Calibration of the monitor on the Satellite L755-18Z

  Hello world

  Here's a question:
  My screen is very bright.
  In NVIDIA Control Panel, I have 2 choices:
  1. other applications control color settings
  2 use the NVIDIA settings

  If I choose nr. 2 - everything works well until the next reboot - ' other applications (I guess Windows OS) "takes over - monitor is very bright once again, and I need to go to the NVIDIA Control Panel and apply 'use NVIDIA settings' again. (However, the brand remains in option 2, and I have to mark opt. 1, then mark opt. 2 again and press the "Apply" button). Everything is a bit irritating.

  Someone knows what to do in this situation?

  Hello

  Check out this Microsoft page on the color management settings
  http://Windows.Microsoft.com/en-us/Windows7/change-color-management-settings

  Very interesting the calibration of the screen part where you can find a step by step instruction how to enable disable calibration loading Windows.

  It seems that the standard calibration of Windows crushes the nVidia settings and in my opinion, this could be resolved by disabling the Windows calibration.

• HP Designjet T3500 printer: Printer - scanner calibration target T3500 is not accepted

  We need to calibrate the Analyzer (rolls and glasses are empty) our T3500 printer, but the calibration target is not accepted (calibration target is not valid), we tried in user (maintaining the image quality) and also in service (service utilities - validation scan) mode, but in both cases, the target of calibration is rejected. Same calibration target has been used for calibration of the T2300 scanner without problem.

  T3500 has the latest fw. installed.

  Please advice if you have experience with this problem, thank you.

  Hello

  Finally, the problem is solved by the black pencil..., there is a box of identification (such as a bar code) on the upper right corner of the calibration sheet, even if it has been used to sentence, but some places on this label were dead black and we have improved in pen and now the target is accepted and calibration is successfully completed.

  Thanks for your time and your suggestions.

• HP DreamColor Z27x: Calibration HP Dreamcolor Z27x - guides

  Hello

  The User Guide Dreamcolor_Z27x.pdf, page52 under "Introduction to Color Calibration.

  says:

  "

  A detailed discussion of the calibration is covered in the
  HP DreamColor Z27x Advanced User Guide

  "

  This guide seems to be hidden quite well.

  Then, on page Z27x, there is a link to:

  "Best Practices for the HP DreamColor Z27x Studio Professional screen calibration"

  However, only one results in a 404 error.

  where to find these books?

  Thank you

  =

  @hpwul

  Try this.

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=6644016 & docid = emr_na-c04481695 & docLocale = en_US

  REO

• Satellite L500 - reset color calibration

  HI -.

  I've only had my L500 Satellite during the week. I have a problem with the images on the laptop with a blue cast. I calibrated color and get perfect only so he can reset when the computer is turned off and restarted. Tried several times without success.

  Can anyone help?

  Hey,.

  Can you tell me where you have changed the colors exactly, please?

  Normally, you can change the colors in the options of the display driver. After that, you will need to save the new settings and save them as new profile.

  Check this box!