Anchoring of the Images when creating EPUB

Similar Questions

• HX850 - no adjustment of the image when using netflix

  Hello

  Is it possible to adjust the picture settings when using netflix? All the buttons on the remote seem to be blocked when netflix is running. It is very annoying because I can't disable cinemotion making all movies look like they were saved by a kid with some * camcorder.

  Adjustment of image quality with 'common' setting also does not affect the settings of the image when the netflix app is running.

  THX!

  Hello FA5_FLIP.
  Welcome to the community of Sony and thanks for the post.

  Setings photo on TV are not accessible when you watch Internet channels.

  Fact the image appears in poor quality when the various videos of Netflix streaming and streaming of various videos like YouTube, Amazon etc. Internet services?

  Are the same Netflix videos appear fine when transmitted in an another TV or computer?
  Check if the speed of the Internet meets the requirements of 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  Try to update the Firmware of the TV to the latest version.

  Try to separate the TV from Netflix account and even add a link to it.
  Follow the steps below to remove the TV has Netflix.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32176

  Thank you.

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• Lightroom 2.5 size of the Image when printing

  I have searched and tried several approaches but can't LR to adjust the size of the image when printing.

  For example, I have a Page of Laboratory Test tif image that has a size of 23 "wide x 29" H paper and resolution 180 dpi.

  I can use CSR 4 Image/Image size to change this in a 8 "W x 10.5" H and a resolution of 320 DPI using resampling. The reduced image prints correctly in CSR 4 on paper 8.5 "x 11" and translates. 25 "top and bottom margins. The same thing happens in LR 2.5 with the reduced size image.

  However, if I try to print the original image using LR 2.5 to automatically resize the image it is malfunctioning. I tried all kinds of combinations of settings so that it can reduce the image (as is done in 4 CSR) and print with. 25 "down the margins without success. The image can not resize correctly.

  Is it a bug, a feature?, or operator error? Can anyone tell how LR 2.5 will resize automatically so it prints correctly? I tested on other computers with the same results.

  Thank you

  Go to the print module.

  Select print to jpg.

  Set the resolution at 180 dpi.

  Other output parameters, sharpening, profile of such paper as required.

  Determine the size of margin according to the needs.

  Set the size of the cell to the size of the image

  Set the Dimensions of the custom paper size... 29 "x 23" in this case.

  You can drag the size of the cells and the edges around until get you exactly the layout on paper, you need. So how successful final print to the file, name the file, and the work is done.

  If you want to print a different size, with different resolution, on paper of different size, with different borders all this can be done in the print module and it is WYSIWYG if no guess work (or calculations) involved. LR rather PS this also has the advantage of use much better algorithms for images of migration than PS and application output sharpening for the specific media type, to which you intend to print, using the RAW data

• not the same size of the image when I import it

  I want to import an e imagexactly the same size he is, but I can't do...

  someone at - it an idea? Thank you.

  I'm using flash pro cs5.

  Hi Jakob,

  Try this first-

  (1) Insert the following code into a new document and check the system screenDPI:

  import flash.system.Capabilities;

  trace ("Capabilities.screenDPI:" + Capabilities.screenDPI);

  (2) If for example, the output is 72 dpi, when you import an image, it seems that Flash is resized to match what he thinks it's the resolution of the screen and in this case, its 72 dpi. So if the image has a higher resolution, he dimensionnera it down.

  You can try the following-

  Create an image in Photoshop with say 300 dpi. Create a new one with a 72 dpi. Import both of them in Flash. The first image will be scaled down, but the second image retains its original size.

  The solution is to make sure the graphic that you import is 72 dpi resolution.

  You can use an image editor like IrfanView to check or adjust the DPI of the image that you use.

  Let me know if it helps.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team.

• Node property/reference for the image and 'Create VI' inconsistent control?

  Hello

  I encountered this problem several times already and although I have worked around him, so far, I would really like to understand what is it:

  If I have an image display control on the Panel before (IMAQ Vision, not the image control type) and drag a property node or a reference to it on the block diagram, it seems impossible to create a Subvi diagram if the selected objects are equipped with a knot of property image or an image reference. Select 'Create Subvi' won't do anything, don period. No warning, no beep system, no nothing.

  A related issue is that if I have a view control reference on the diagram and try to create a control from it (for example to use as a control on one dimension of connector VI entry), same thing, "Create control" will not do anything.

  Why is this?

  Thanks for your comments.

  X.

  Xavier,

  This was reported to R & D (35835) for further investigations. A possible workaround is to make the Subvi LabVIEW 7.1 and open it in the new version of LabVIEW.

• Hide the image when sending as an attachment in Windows Mail

  When sending an attachment in Windows Mail images, the image appears on the body of the email. How can he be hidden?

  Hi Agent CU v-13doza

   

  To prevent the display of Windows Mail attached pictures in the message, you can follow the steps mentioned below and check:

  a. ensure that Windows Mail does not work.

  b. press Windows + R.

  c. Type "regedit" (without the quotes). Click OK.

  d. for Windows Mail:

  Go in HKEY_CURRENT_USER\Software\Microsoft\Windows Mail.

  e. Select Edition | New | DWORD (32-bit) value in the menu.

  f. Type "Automatically Inline Images" (again without the quotes).

  g. press ENTER.

  h. check the column data of automatically Images Inline said 0x00000000 (0)

  ·          If it isn't, or if you already have a key automatically Images online.

  ·          Double-click on automatically Images online.

  ·          Type '0' (not including the quotes) in value data: and

  ·          Click on OK.

  i. close the registry editor.

  j. start Windows Mail and check.

   

  I hope this helps.

• I do not see the image when I layer 2 images

  I try to layer 2 in PS JPEG files and tried to open the 2 files and copy / paste it and also tried to drag and drop.  A new layer is created, but I do not see the image so that I can resize.  Went through all the tutorials and answers to similar questions but no luck.  Tired - I'm sure this must be a very simple thing to do.  Thank you.

  I figured well tones to be involved, but with a jpg that wouldn't be a problem anyway.

  What did you do for troubleshooting so far?

  Restoration of preferences after checking all the presets custom like stocks, models, brushes etc. have been saved can be a good starting point:

  https://helpx.Adobe.com/Photoshop/KB/basic-trouble-shooting-steps.html

• Text the PIN in the center of the image when using fluid width

  Dear fellow users Adobe Muse,

  I have a some problems pasting blocks of text for the picture frames when you use layout fluid width.

  What I want is to have three images side by side and a text centered on each photo.

  When my browser window resizing pictures fit perfectly, but the text does not follow.

  I tried to classify, but it does not help.

  
  

  Is it possible to lock text block so that it is always at the center of an image?

  
  

  See the images under (the first showing what I'm after and the other showing what it looks like when resizing)

  

  

  Try the workaround mentioned in this post: Re: text on reactive image?

  Best,

  Anna

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• Why am I a mistake "linked picture", but I can see the image when I recursively, see the file?

  I am a new user of Adobe Illustrator, but have used products in the past which can open and print files .ai.

  I have an image that I got from a graphic designer who gives an error "could not find the linked file' open in Illustrator.

  However, he shows in other programs (such as Inkscape). Experimentally, in Illustrator I've recursively referred to as the file itself under the dialog "replace" and when it comes to the image is replaced by a version of the full file that includes the image.

  Illustrator saves an image fully integrated and information construction to build the image and editing? It seems that it might be a pdf layer? The precision with which it represents the original image? Is it possible to access the version of this image in Illustrator?

  The image is embedded in the PDF of the file part

  This mysterious does Illustrator - saving files on Vimeo

• Get the error when creating indexes in RAC environment in 11 g

  Hi all
  
  I'm new concept CARS when creating index get below error
  
  Error: AX_DISABLE_HIST - a SQL error. Position of the error: 0
  Return: 12801 - ORA-12801: error reported in the P146, proceeding parallel query server
  ORA-12853: insufficient memory for buffers PX: run 425904K,.
  Max needed 11105280 K ORA-04031: unable to allocate 32792 bytes of memory ('', 'unknow shared pool
  UNIQUE INDEX CREATE PS_AX_DISABLE_HIST WE PS_AX_DISABLE_HIST (EMPLID) TABLESPACE PSINDEX STORAGE
  (MAXEXTENTS THEN 65536 40000 INITIAL UNLIMITED PCTINCREASE 0) PCTFREE 10 NOLOGGING PARALLEL
  
  am not able to understand, it's this problem is related to the index or sga memory. can any time help me on that.
  
  Thanks in advance
  Prabhakar
  
  Published by: 889571 on May 16, 2013 07:41

  You probably need SGA more because you have a lot of Parallels/slave servers in your instance. I see that you have at least 146. How many processors do you have? Do you need so many parallel servers?

  Lordane Iotzov

• Loss of the size of the image when exporting .tif

  I have a series of .tif images that have original dimensions of ~ 4700 x 4700. However, when I open them in illustrator, they invariably under ~ 1750 x 1750. TIF, even if no changes have been made. How to preserve the size of the image?

  Lol Illustrator will always respect the resolution setting. You will need to put the image in Illustrator, if you want to keep the resolution.

• Assignment of roles to the user when creating the user

  Hi all
  
  I gave a roll deposited (< dsp:input bean = "ProfileFormHandler.value.roles.role" maxsize = "30" size = "30" type = "text" / > on the registration page.) After registration, each field in db except role (table dps_role).
  Pls let me know what I am doing wrong.
  
  Thank you

  You should not assign roles to the user as 'ProfileFormHandler.value.roles.role' of 's profile. You can link formhandler property to which you can pass the name or id of the role that you want to assign role assignment must always route through safety ATG API in order to properly update the mappings of Homeland Security. Because of these dependencies, you should not try the role of simply call profile.setPropertyValue ('roles',...) The code cannot fail this way, but if you assign the role in this way then it may not work as expected when checking for role based privileges. Here's one possible way to do it:

  1. in your file properties formhandler declare a dependency on the directory of the default user, which by default points to the profile database:

  userDirectory = / atg/userprofiling/ProfileUserDirectory

  So, in the form Manager, you declare corresponding setUserDirectory() and getUserDirectory().

  2 then in the formhandler, get the DirectoryPrincipal objects associated with the user profile and the role you want to assign and then assign the role to the user:

  import atg.userdirectory.UserDirectory;
  import atg.userdirectory.DirectoryPrincipal;
  import atg.userdirectory.User;
  import atg.userdirectory.Role;
  import atg.userdirectory.DirectoryModificationException;
  
  import java.util.Collection;
  import java.util.Iterator;
  
  ..
  ..
  
  private boolean assignRoleToUser(String roleName, String userId) {
  
    UserDirectory userDirectory = getUserDirectory();
    DirectoryPrincipal userPrincipal = userDirectory.findUserByPrimaryKey(userId);
    DirectoryPrincipal rolePrincipal = userDirectory.getRoleByPath(roleName);
  
    User user = (User)userPrincipal;
  
    Collection collection = userDirectory.getRoles();
  
    boolean status = false;
  
    Iterator iter = collection.iterator();
    while(iter.hasNext())
    {
      Object obj = iter.next();
      if(obj instanceof Role) {
        Role role = (Role)obj;
        if(roleName.equals( role.getName() ) && user!=null) {
          try {
            status = user.assignRole(role);    //will return true if the role was added otherwise false
          }
          catch (DirectoryModificationException e) {
         //handle exception
          }
          break;
        }
      }
    }
    return status;
  }
  

  In the code above 'roleName' parameter is the name of the role to be assigned to the profile with the id as "userId". If you want to do the role assignment when creating the user, then you can do the things above in postCreateUser() so that you can get the Principal associated with the profile. For more information about the interfaces and classes used here, you can refer to the documentation of the API of the ATG.

  http://docs.Oracle.com/CD/E26180_01/platform.94/APIDoc/ATG/userDirectory/package-summary.html