black line on the left printing margin

Similar Questions

• Black line on the left side of the page

  I have a HP Laserjet 1018. The toner is old, there are about 3,000 pages.

  These days, I saw a black line on the left side of the page. The rest of the page is fine - faded streak.

  I took the toner and it has shaken for a few seconds, from one side to the other, but who has no good.

  Any recommendations?

  
  HP LaserJet p1102w

  1018 manual says that when this happens, the old toner drum is scratched and insert a new. I did, and the line has dissappeared,

  OK, there was more Ink toner, left, but after 3, 000-plus pages, I can live with having to replace it.

• the presentation of the screen on my monitor is slightly off center with a thin black line on the left hand side. Ho can I fix this. I am running Windows 7 with a monitor Samsung SyncMaster SA10

  The presentation of the screen on my new monitor is slightly biased with a thin black line on the right hand side which makes it awkward hitting the back button on the upper left side of the screen. How can I adjust this?  I am running Windows 7 on a new Compaq PC with AMD Vision and monitor Samsung SyncMaster SA10.

  Any suggestions to adjust welcome.

  Thank you.

  The monitor must have menu on the side or the bottom buttons - in the find menu where you can adjust the horizontal position of the image.

  Increasing or decreasing the horizontal value will move the image left or right. When it is centered properly, you can exit the monitors.

• When I scan a document there is a black line on the left side of the document

  Photosmart Plus 210 has with windows 7

  The document troubleshooting here can help.

• How to remove a black line between the two parts of the scanned image?

  Hello

  I scanned a drawing I did a long time ago.

  But given that the paper is too large for the scanner, I had to do two scanning. I wanted to join these two parts as in Photoshop.

  I loaded the left side of the drawing.

  I changed the size of the canva so the second part could be put there.

  I loaded the part right of the drawing and copied and paste it on the canva of the left side of the drawing.

  But whatever I do, I can see a vertical black line where the left and right hand reach. On the contrary, where the right side starts, it seems.

  Could someone tell me (or direct me to a tutorial that tells about) what to do in this case?

  Thanks in advance for your answers.

  This isn't under file, Scripts, but under file, PLC.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• Incoming Fax page, left thick black line down the side edge

  Hello

  I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

  Comment of thoughts,

  SyBerGuy

  Hello

  For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

  In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

  So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

  Sy

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• I have a black border to the left with a white line and viewing area office is shifted to the right?

  I tried everything I know to get the full screen. But still have a black area on the left with a white line in the middle and I can't read the whole screen? just as now the typing I get to the right goes beyond design. I need to move the screen to the left one having full screen again. Help

  I tried everything I know to get the full screen. But still have a black area on the left with a white line in the middle and I can't read the whole screen? just as now the typing I get to the right goes beyond design. I need to move the screen to the left one having full screen again. Help

  ==================================================
  Your monitor has any manual controls for the centering of the screen?
  There may be buttons or buttons just below the exposure correction.

  Depending on your video driver... you may have a control panel that
  allows you to adjust the display settings. For example... NVIDIA has this
  option... just go to... Control Panel and see if you have the Nvidia control
  The Group of experts.

• document feeder prints a black line down the Middle

  document feeder prints a black line in the middle of the page

  Yes, the warranty is still valid! I bought the extended warranty for the replacement. So I guess I will contact HP for a new printer.

  Thank you very much for your help!

  Ted

• my printer is copying with a black line in the middle of the page

  My printer has just started the copy with a black line in the middle of the page.  Any ideas what the problem is and how to fix it?

  I have a Photosmart C7280 all-in-one printer.  Thank you!

  This document should help:

  Scan quality

• Problem with 'small black line at the right margin' with Folio Builder / Viewer to Adobe in the Ipad. ID CC.

  Hello

  When I create a Folio Builder and I check my project Id in the Adobe viewer (sometimes in the Ipad app and Desktop Viewer), I can see a black line at the right margin (maybe 4 px). And I can not set my background (it is an object with a color) to use the "full resolution available to the app in the ipad" and Yes, I'm using rules and I see that my object wallpaper is 1024 x 768. I tried several projects and upgraded the project for the "30" version

  But I am a new user with the ID/DPS. So, is this a bug reported? Or I'm doing sth wrong?

  And for me, the most important issue, will fix this when I send my project to the applestore and DPS transform my Folio to the store? Or what I see now that's what I'm going to see?

  Thank you!

  Sorry! I found an answer here in the discussion:

  http://forums.Adobe.com/message/5835960#5835960

  So the problem will be solved in the final application, and it's just the scrolling in the Viewer.

  Thank you!

• Thick vertical black line on the entire length of the page

  I have a HP LaserJet M1530 MFP Series PCL 6.  When I print normally there is no mistake in the image, but when I make a copy I have a thick vertical black line on the entire length of the page. The black line is about 2 inches from the left edge of the page. The problem is older than the current drum cartridge which was just replaced a couple of months. Never, the problem occurs with a normal printing, copy only and occurs with every copy without exception. Does anyone have any ideas/suggestions?

  Hello somedudeand welcome to the Forums of HP.

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .

  I hope this helps!

• LaserJet M451dw: black line to the bottom of the page

  When I print a document, a continuous black line appears in the middle of the pages. The first 2 pages are normally well, but the rest of the pages have the black line.  I cleaned the printheads etc.  I hesitate to change the ink because there is more than half a cartridge left in all colors.

  It sounds like a faulty black toner cartridge.

  After printing open access toner and remove the cartridge and look at the drum and if there is a black line on the drum, then it would prove.

  If you have half left toner cartridge is still in warranty and you may be able to get it replaced.

• All-in-one Officejet 4630: black lines at the copy and acanning

  Hello... I just bought this all-in-one today, and it is printing very well.  The problem is with the copy and scan.  No matter if I place the original on the scanner or the top of the page, the result is the same... sheet is covered with black lines of variable thickness, running up and down the page, while the details of the actual document are barely visible underneath (or colored lines if I select color printing).

  Not an expert tech by any means, so hard to solve this problem.  Have re-installed... rebooted the printer cartridges... try to print with a cartridge installed... nothing work so far.

  Any help or advice is welcome and appreciated!

  Hi @D_Corbs ,

  I see you got black lines during the scanning of the bucket and the ADF. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, please update the firmware of the printer. E-all-in-one printer drivers HP Officejet 4630.

  If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Contact HP.

  Have a wonderful day!
  Thank you.