C410a ADF

Similar Questions

• Photosmart Premium Fax E-all-in-one C410a dislodged ADF rollers

  In the context of trying to fix a paper jam in the ADF, I dislodged the rollers which pulls the paper in the ADF. I was not able to put it back. Is it possible to fix the problem? If so, how can I find someone who knows how to do?

  If it will not entirely be in housing, then it may be violating one of the tabs that cements the Assembly.  Try carefully reinstall the roll to make sure that this isn't just the plug of battery blocking the full implementation of Assembly.  However, if it seems to him a piece, then the next step will be a substitute.

  Be sure to call HP Technical Support to see what options are available for your particular unit/situation.

  Contact HP worldwide | HP

  Hope this helps,

  Jason

• When Windows starts, it starts also Mozilla and an adf.ly page appears.

  I myself Adf.ly Skipper, but firefox always starts with windows and ot adf.ly it load Google.com. All - tried reset firefox, anti-virus, backup even my computer. I'm never mozilla start with windows or install adf.ly or anything... What can I do else? Help!

  If you change your browser by default for Internet Explorer, the page opens in Internet Explorer the next time? This would be the common model for external pages, they are targeted on the default browser.

  Microsoft has a utility named autoruns, you can use to see what is configured to run at startup (opening session): https://technet.microsoft.com/en-us/s.../bb963902.aspx. I hope that this will help in tracking it.

• OfficeJet Pro 8620e ADF jam error after firmware update

  After you install the updated firmware from the touch screen of the printer, the printer restarts and now has an error that says "Original is caught in the ADF (ADF).  Open the cover of the ADF, remove and reload the original, then try again. »

  I went through all the steps to clear a jam from the ADF, but the opinion is persistent.  It is not (and was not before the upgrade) in the ADF at all.  Since this coincided with the update of the firmware, my suspiscion is that the firmware has not installed properly or something.  What am I doing here?

  This problem has been resolved using the printer instead of purchase and exchange for another.  I can hardly believe that the cables are working loose within two weeks, she was detained and then broke at the exact time that the firmware update has been completed.  In any case, the problem was solved by replacing the printer.  I don't have any feedback solutions until a month after I did.

• How can I remove, I believe that it is a virus named "adf.ly?

  Hi guys. I hope someone can help me.

  Both of my browsers, Safari (main) and Firefox work very badly and every time that I tried to open what used to be my 'homepage' (www.uol.com.br), a strange page opens instead (in both browsers) with the address "*: / / adf.ly/noscript.php?t=js. I looked all around the internet to learn how to get rid of him that drives me crazy. I think that it is a malware. Please help.

  Thanks in advance.

  PS: Guys, I found that Safari it does not work well. I have been in this community write this post and the text was inserted in white color and I could see it if I select in the box, I came to Firefox to do this post.

  < link published by host >

  Fixes for Adware and pop-ups:

  1. Malwarebytes
  2. 2.11 DetectX
  3. Remove the adware that displays pop-up ads and graphics on your Mac
  4. T stop advertising windows pop-up and adware in Safari - Apple Suppor

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• OfficeJet Pro 8600 Plus ADF problems

  I have a new machine.  Everything seems to work fine, except the ADF.  Whenever I try to transmit documents in the ADF, it tells me that there is no jammed paper and there is no.  It is brand new.  I tried to turn the slot and turn off machine, unplug the power cord for 30 seconds.  I can scan and copy from the glass, but not from the ADF.  I tried a leaf up to 20 sheets with no luck.  Please help, the ADF file is very important that I am able to use it.  Thanks in advance!

  Hi, DCI,.

  Follow the steps outlined in the document below and let me know what you find?

  http://support.HP.com/us-en/document/c01728503

• When I scan documents with HP Photosmart 7510 ADF, how can I stop the pages to be marked?

  Hello

  I use a HP Photosmart 7510 (model No. C311a, product no. CQ877B)

  When I scan documents using the automatic document feeder, they are more often (80%) marked left.  It seems to be caused by the wheel which initially grabs the book.  It provokes a black spot of the width of the wheel to be left on the page.

  The mark appears about a quarter turn to the bottom of the page and is about 1/2 cm in height, but is very sensitive.  Sometimes, another brand is left a little further down the page and sometimes these two brands are accompanied by a very reduced, but still noticeable grey banner (again I believe caused by the wheel).

  The brand is very visible not only on the scanned now but also (of course) in the pdf file that result, and since I'm on this printer for things like job applications, it's not big.

  Other people know about this?  If Yes, is it possible to fix it or must return the defective printer?

  See you soon,.

  silverShnoop

  Hello silverShnoop

  Such problems can sometimes be caused by dirty rollers or the parts of the ADF (automatic document feeder). The following instructions (whereas for a different problem) contain instructions for the cleaning of the AAD.

  The ADF (ADF) captures no paper

  There is another article that could help as well. It contains instructions for cleaning the scanner glass.

  Vertical stripes, lines or streaks in the Copies or Scans

• OfficeJet Pro 8500 a: ADF not recognized in the scanning window

  I had to reinstall my 8500 and the ADF show up as an option in the HP scan window. The charger works in copy mode. I reinstalled using the original disk shipped with the printer and have also tried to download the software and latest drivers.

  Scanner works fine using the glass, but I can't use the ADF. I uninstalled the printer and reinstalled several times.

  Any ideas?

  Hello
  
  Thank you for using the HP Forums.

  You can try this alternative software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Make sure that when you scan, the 'Source' is selected as 'Use if loaded document feeder' using the ADF.
  
  Let us know if it works.

• HP Officejet Pro 8620: Im a line is printed to the bottom of each page I copy via adf, including analyses

  Everything I insert through the adf comes out with a dark line printed to the bottom of the page, including pages that are being analyzed?

  This is caused by a specification on the thin piece of glass to the left of the main bed.  Clean this area, it will solve the problem.  It can help to use a strong flashlight which is held parallel to the glass to highlight the area that needs to be cleaned.

• OfficeJet Pro 8600 Plus: possibility to alternate flat and ADF for a scan job

  On the earlier driver software, he was able to detect automatically if you use the ADF and flat for analytical work.  It was a useful feature when scanning a lot of pages that I have been able to feed smooth sheets in the ADF, and then use the dish for receipts of odd size.

  Since software 'upgrade' about a year ago, the user interface of the scanner has changed and I am now forced to choose between ADF or flat for the analytical work all.  The quality of the display is also a downgrade that he now has only a small button on the left to add to other pages.

  Is it possible to return to the old driver software to scan at least?

  I use the printer from several computers Windows 10 & 7 both now have the problem.

  Any ideas?

  Thank you

  Martyn

  Hello
  
  Thank you for using the HP Forums.

  You can try this alternative scan:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know if it works.

  You should be able to choose 'Source' before start you scanning when you 'add page '.

  Hope that helps!

• Cannot copy from the surface of the glass. HP Photosmart Premium Fax all-in-One, model # C410a

  Hi people,

  I can't make a copy of the surface of the glass of the printer. Automatic advance works great, time to take the paper and print a copy. In the past, printing from glass was not a problem. The error message on the printer says "Document Feeder Jam. Reload document, then restart of work. " The problem is that there not be jammed. I raised the lid of the printer and checked the ink cartridges, checked the paper tray and open the access to the rear of the printer.  I have an HP Photosmart Premium Fax all-in-One, model # C410a. All accepted ideas. Right now, I'm ready to start with a hammer.

  Oops, I got typo in my link.  I have the fix above or you can click here.

• Is there a way to scan both sides of the ADF on OfficeJet Pro 8600?

  I try to scan a document very large, double and want to place the document in the ADF and have both sides scanned to PDF.  Is it possible to make this work?  I am running Windows7.

  Thanks for any help,

  Stasi

  Hi Stasi,

  The artist supprted only scanning automatic duplex HP Officejet Pro 8600 Plus or Premium.

  The 8600 (N911a) Standard model does not provide these capabilities.

  Kind regards

  Shlomi

• Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

  I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

  My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

  Thank you.

  Yes,

  You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

  Try following these steps to solve the USB error during installation:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Fax multiple pages in the ADF

  When you try to FAX several pages, I load in the ADF of my 6700 printer and start fax.

  After that some Fax pages with success, get a printout showing ERROR 346. It also indicates that a communication error occurred during the transmission.

  This doesn't seem to be a random problem, but occurs whenever I try to fax multiple pages. In addition, the same thing happens with different recipients.

  I've never run into that until I started to use my 6700 printer. Previously, when you use a fax, it never happened.

  Any help would be greatly appreciated. Thank you.

  Hello mortn99 here, I hope you enjoy your Monday

  I noticed your post on the 346 error code that you receive when you send a fax to multiple pages of your 6700 JO. Here is a screenshot of the definition of the error code and a link to the Web site to interpret the error codes in the future. The suggestion is to change the speed to slow and disable the ECM which may help you!

  See eight Solution and Solution nine to get instructions on changing the speed and disable ECM.

  Send fax fail intermittently or fails for a single recipient

  

  Interpretation of the Error Codes in fax or fax history reports Communication error

  I hope that helps!
  

  Have a nice day