Can connect but can not map or access by car.

Similar Questions

• Mapping to a Windows 7 disc from a XP platform, it creates the connection but it says "share: denied \Access.»

  Original title: mapping to a Windows 7 disc for XP platform

  Hi all is there anyone who can help me with the mapping a drive of windows 7 from my xp machine? I shared the drive on the computer 7 and everyone has permissions with full game. I can map other machines windows 7 itself but not some xp machines. I can ping the machine 7 machine xp with the address and the name of the computer. Now when I map the drive to create the connection but it says "share: denied \Access.»
  Any help is greatly appreciated.

  Hello Jgg5037,

  Double check to make sure that all computers are part of the same working group:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_ident_join_workgroup.mspx?mfr=true
  Disable host group on the Windows 7 computer:
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions
  Let us know if any of these methods help you resolve the error "access denied."

• Cannot access Internet. It says I'm connected but will not display web pages.

  Original title: web no

  Unable to connect to the web says I'm connected but does not display pages

  Hello

  I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.

  Why can't I connect to the internet?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network

  If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.

  How to do a clean boot mode

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.

  Thank you

  Legaede

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

   

• My wireless connection status shows that I am connected but I did "no internet access.

  Original title: internet connected but shows "no internet access" why?

  I have a gateway laptop and everything suddenly I can't access the internet.  My wireless connections shows that I am connected but I did "no internet access?  I tried to disconnect and reconnect, but that has not worked.  I tried troubleshooting and it says there is a problem connecting with my modem, but it is impossible because all other computers cell phones/Ipod work correctly on the same connection.  Can anyone help?

  Renee

  Hello

  You did changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Remove all the wireless networks, listed in the network and sharing Center.

  1. click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer.

  Select your wireless network and connect (if course, enter your password). Check if you see exclamation of yellow color on the bar strength wireless connection.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the following link.

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the method above does not work, proceed to the next method.

   
  Method 3: Reset the TCP/IP stack.
  
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 4: Perform the steps from the link to set up a new wireless connection.

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

• I followed the steps for E-learning but did not have an access code

  I have signed up for the microsoft free e-learning, created windows live mail, but did not get the access code I need. How to do it?

  Hi momma05,

  You may need to contact the support of Microsoft E-Learning for help on this one.

  Microsoft Learning Support Microsoft Certification l help l cat l Live Local RSCs

• Defender is turned off, but does not give me access to it 2 turn on power

  original title: windows Defender

  These days have a lot of problems with my laptop.  Problems with starting.  I need to access windows defender to modify startup programs.  It is said that Defender is turned off, but does not give me access to it 2 turn it on.  In addition, different problems with different users and accounts by the office put in place, it looks like all my users are running different versions of windows, so I don't know where to start with all the problems.  Security sounded like a good place 2 start, so I guess I'll start by Defender problems.  (I have recently downloaded the free security essentials, safety signs so all green lights).

  Hello

  You might have developed some questions so I would make these your
  Admin account. These are in addition to checking your startup
  programs.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Workgroup computers connected but does not appear in the network folder

  I got number of connected computers on my working group, but for the moment, only 3 of 8 computers appear in my record of working group in my network.

  When I search the names of each computer on the 'Search' from the menu 'Start', they appear and seem to be connected as I am able to access the shared folders.

  The name of the computer, I searched (let's call it 'Computer 1') appears on the left menu under 'Network' with 3 computers that are obviously connected but when I click on network and go into the network, computer folder 1 is still not visible and only 3 computers are indicated.

  How can I solve this problem?

  Thanks in advance

  Hey Kass,

  These computers are on a domain network?

  I suggest to follow the steps described in the article and check if it helps.
  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/en-CA/Windows7/why-can-t-i-see-other-computers-on-my-network

  
   

  Why computers are missing from the network card?
  http://Windows.Microsoft.com/en-CA/Windows7/why-are-computers-missing-from-the-network-map

  Let us know if it helps. If the problem persists, we would be happy to help you further.

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• iPhone 6s and carplay connected but does not work

  It has worked before and now does not. I deleted the system carplay phone and indicated above. The iPhone says bluetooth is connected to carplay and carplay indicates it is connected to the iPhone, but it does not work properly. I can't get or receive calls. I hear the phone ring on incoming calls by speakers in the system several times and when I touch the phone button my steering wheel to answer does not work, or it shows the phone number entering on the radio screen. When I try to make a call, the iPhone does not, I call say they have heard their phones ring but could not hear me speak, phones sounds dead on both ends. I have to disconnect carplay to make and receive calls.

  As side note my iPhone and carplay work with audio for listening to music, but who also has been removed from carplay so that I can put in place the phone carplay only system.

  Any suggestion would be appreciated.

  Concerning

  Steve

  Nevermind, I figured it. I completely turned off the iPhone and he turned his back, and then just followed the car game voice instructions to synchronize.

• WMP110v2 network connection, but do not open web pages

  I have a Dell 2 GB of Ram and XP PC with the latest service packs and updates. No apparent reason, I had a little difficulty with the installation but after only two tests, but I the WMP110 to properly install and connect to my wireless connection. I use a D - Link Wireless Router N DIR-615 and my other wireless devices are running smooth.

  My problem is that my wireless connection will not go to the internet and I tried to use the Linksys monitor, but also Windows network utilities to check the problem and run the wireless but not connect me. The Web page tries to load, but then ends with the screen 'diagnose connection '.

  I think it will be easy but don't have yet to see a post explaining this problem and I don't know what to try next. Any help would be appreciated.

  Thank you for your interest in Klatch - I got it working well. As the biggest computer frustration usually boils down to a few clicks. For those who have the same problem, here is what has held back me.

  Until I'm able to get a connection I had to find some time to figure out how. Until I went in: WIFI - right click on the wireless connection, and then select PROPERTIES - click on the tab that says WIRELESS NETWORK -, PROPERTY - and then, AUTHENTICATION - once you see a checkbox indicating "authentication enable 802. 1 x for this computer"- UNCHECK this box. You will be able to connect to the wireless network.

  Then, my next problem and the reason for this post was that my network is connected, but I could not display web pages. This solution is buried in the manual on the CD itself. To resolve this issue, you must go into the DEVICE MANAGER to view the Linksys WMP110 under network adapters. Click on in the driver, then go to the ADVANCED tab. Here, you will see a list. You will need to click on the NETWORK TYPE. You should see two types of networks that you can select. The default value for mine was INFRASTRUCTURE. I had deselect this and select AD-HOC instead. My web pages now appear quickly, and I can browse the internet with wireless only!

  My setup is a N D - Link DIR-615 wireless router. I run Windows XP Home Edition on a Dell system. My type of security is WEP.

  Hope this info may help others.

• Windows Vista wireless connects but I have no internet access in Internet Explorer or Google Chrome.

  Hi everyone who wants to help me entered the passphrase for the wireless, everything seems fine, until I have try to go on ie or google chrome and any other browser that I have, which could materialize this project? Thank you

  original title: can not go on web browser

  Right-click on the network icon in the taskbar and choose troubleshoot internet connection and see if it shows anything. If this din't work, then try to contact your Internet service provider, they might need some settings you will need to reconfigure with new router like proxy or static IP.

• 6510 will print using the Wi - Fi connection but does not include connection eprint

  I have a new printer 6510. The implementation went very well and it gave quality printing results in a few minutes until I tried to add ePrint for her.  The printer is connected to my computer via a wireless router for the wireless works. On the Web Services allow that I am advised to refer to the computer for progress, but the computer requests a Code that must come from the printer.  How can I move this forward.  I know that the printer must perform an analysis to update online as the first part of the process and it begins to connect but never gets anywhere.  Ideas welcomed...

  Oops. Sort it myself.  Suddenly realized the SSID of the router address was the original generic setting.  Changed to a single address and the printer took life... I think this would be clearly a lot... but for now, I'll give me 5 stars

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• HP Laserjet M452dn: M452dn Ethernet connected but do not print

  Win10 Pro x 64.

  Printer connects / impressions via USB but not via a direct Ethernet connection or through router.  Connection to printer Ethernet is not but installation disc is located by HP print and Scan by IP addfress doctor. Doctor says software not installed then DLs and installs the software - but still does not print.  Uninstalled and did the all over again: ditto. If again, doctor without uninstalling it (still) says not installed software - although it said it was installed before I ran it again.

  Router/printer Ethernet connection is good (fire port on) and the IP displayed on the printer screen, so I guess that the connection of the cable Ethernet/is OK. Network/print sharing enabled residential group. Utility of Windows/HP ID troubleshooting any problems.

  Something else I could try.

  Thank you

  Monk

  Hello @Hmonk the printer has two ways to be connected but we really recommend use one at a time if you are going to perform a network first installation you want to make sure that you have an IP address from the printer connect the network cable to the printer room will get internet brand of course, on the port on the back of the printer when you have connected cable has a green and the orange light and then go to the menu reports on the printer and print a configuration report right on the 1st page under product settings, you will find IPV4 you must subsequently make the installation at this time where everything you want to make sure, is that the IP address of its different then 0.0.0.0 or 169.254.XXX.XXX since these combinations indicates that the printer its does not properly connect to the network