Clicking TouchPad problem

Similar Questions

• Left-click touchpad problem, after a few Pro Win-7 updates

  A system restore solved the problem temporarily, until this as Win-7 auto-updated! [Win 7 Pro with Firefox on an Acer TravelMate]

  Hello

  Yes, you can try to reinstall the driver mode safe mode and see if the problem persists. If this is not so much the problem, you can do the following:

  Method 1: Download and run Microsoft Fix It for convenience hardware store.

  Method 2: Going back to the old driver. To restore a previous version of a driver:

  1. Open the Device Manager.

  2. Right-click the device for which you want to restore the previous version of the driver, and then click Properties.

  3. Click the drivers tab.

  4. Click on restore the driver.

  5. In the restoration of the driver Package dialog box, click Yes.

  Let us know how it goes.

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• laptop HP envy 15 ts: touchpad by clicking Update problems post windows 10

  Since update to windows 10 my touchpad not working properly. Whenever I have try and click anywhere on the touchpad, it works as if I clicked the middle mouse button. I can't highlight text or right-click on things on the Web pages, it appears the scroll icon. Tapping can still select things as usual. Thanks in advance.

  clockwiseduck

  Thanks for posting the full name of the system

  install the new HP Support Assistantyou of new drivers and bios for install

• Split x 2, touchpad problem

  The Split X 2 HP with processor i5 and WIndows 8.1

  I bought a x 2 split this last November and I had a problem of re-occurred since I got it. During use, the mouse will often freeze and my touchpad does not work. Can you please tell me how to fix this? I am a student engineer and I need my computer works fine for my work. Thank you

  Hello

  I recently used a Split 13D x 2 that has the same problem and the next seems to correct the problem.

  Open windows control panel and open the Device Manager.  Expand "Controllers of Bus USB" and you should find 2 entries for "Generic USB Hub".  Right-click on that 1 and select Properties, then select the tab power management and Remove the tick in the box "allow the computer to turn off this device to save power".  Click Ok to save the setting.

  Do the same for the 2nd "USB hub generic.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Pavilion: synaptics touchpad problems.

  I currently have problems touchpad and mouse.

  I used my wireless mouse once and my trachpad has stopped working compltetely.

  I have seen that it is a common problem but Ive tried everything and nothing works. a hard reset worked once to get my mouse works again without the wireless mouse but when I need to click top of cushion does nothing.

  I tried another hard reset, but the mouse pad still does not work. the mouse only appears when I plug the wireless mouse.

  When I go in the settings is not synaptics, so I downloaded synaptics for my laptop and he said 'impossible to find specific program BONES.' so I uninstalled the old version, downloaded the version for my computer laptop but still said the same thing, even if it was the version for my laptop.

  Any idea?

  @evanb1997

  Install this first.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  RESET.

  Then install this.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72875.exe

  RESET

  REO

• Satellite T110-107: touchpad problem - pointer move sometimes

  Good afternoon everyone,

  Currently I have a series of Satellite T110-107 and have problems with the touchpad.

  I start the computer and the touchpad works very well for a few seconds, after that, the touch pad stops working to full capacity.
  If I wander my fingers on the touchpad and the pointer does not move, sometimes it will move up and down, but not as it should.

  It is a common problem, or is it a hardware problem... or is it the fact that I'm just not accustomed to having the correct settings on windows7?

  All help reveal be great, because it's very frustrating!

  Kind regards!

  Hello

  I found a few tips and tricks that you should try.

  First, you must change the sensitive touchpad settings to lower the level.
  Go to control panel-> mouse and all the settings for the touchpad to the value has a less sensitive level.

  You should also right click Synaptics Pointing Device (in the taskbar) and get in the middle of the page Double click speed on.
  Move the slider to half way down the beach. This should help you too.

  Last but not leas, you will need to disable zoom pinch.
  Go to the icon in the lower right corner Synaptics pointing device, click on 'The pointing device properties', click on the "Device settings" tab, then the settings button. Uncheck "Enable Pinch Zoom" under "Pinch Zoom".

  Greetings

• Equium M40 portable: Touchpad problems

  First of all sorry if in wrong place but couldn't find a group for this laptop. problem as below.

  I just got a new toshiba laptop and when I used it all first my touchpad was
  the side usual low scrolling functions and hot spots, etc.
  Now, he works as a base of the mouse, the cursor moves and you can click
  etc. on the keyboard itself. But I've lost the ability toscroll using the side
  and at the bottom of the pad etc.
  I tried double click on the key and start the program, but nothing
  He's coming!
  I did the transfer of my old laptop settings by using the Windows XP file transfer
  Assistant, is otherwise responsible?

  so far I tried to re install the supplied the toshiba ALPS touchpad driver and
  Touch and the launch but no joy.

  Can anyone help?

  Andy

  Hello

  I don't know exactly where you can find a correct setting on this unit, but it must be somewhere in the mouse properties.

  Please also check the model of laptop. Equium M40 does not for me. Just A60. Give us please the right laptop model.

• Touchpad problem - Satellite A50-111

  Hello. Last week, I bought my laptop and here I am with a problem of inportant.

  The touchpad does not work correctly. When I take the finger above the cursor jumps up and down even when the finger is motionless. (It's like the mouse cursor oscillates on its expected position). It is very difficult to click on anything whatsoever. I use an external USB mouse that works very well.

  I don't think that it is a driver/software problem. I use a linux live CD (Knoppix 3.7) distribution to check if the problem persists under linux. He does.

  Is there someone else with the same problem here? Don't you think that, given the information above, it is a hardware problem or would it be the drivers?

  Hello

  In my view, it cannot be driver issue, as all drivers are put to the test. It is very difficult to say what is a problem.

  You can check all the mouse settings including the advanced feature settings. Y at - there no any improvements you can contact the after-sales Service of Toshiba partner. Those are responsible for all material tests.

  If you need info on the Service partner you can find it on
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• Satellite A-C55-1R8 - interference of Touchpad problem

  I have the Satellite C55-A-1R8, using Windows 8.1.
  The Synaptics touchpad has always given unpredictable results, some setings I have used or cancelled.

  For example, he suddenly loses the ability to receive a double-tap, even if the icon still has ' tap to click on "checked. When I click it, the cursor flies in the upper right of the screen and is difficult to control again.

  However, the buttons continue to operate normally, but if I sleep or Hibernate the computer things are normal again immediately, he wakes up.
  Also, the key often picks up and moves the icons and files without double click. I installed the latest Synaptics driver update, but no change.

  However, I said that the treatment of the files on this model are so thin that the fingers to rest above and below the keyboard can interfere with touchpad controls and begin to suspect that it is maybe the reason some of the strange behavior.

  If this is the case, can I isolate it with almost anything to avoid this problem?

  Have you tried to reduce the sensitivity of the mouse?

  Since when have you noticed such behavior strange touchpad? Since the first may day?

  I don't think it's the best solution for you, but maybe you should reinstall the operating system using the original recovery image and it test the functionality of the touchpad with the 'settings '.
  If the problem persists it could be some hardware related issue so you can contact the nearest Toshiba service provider and ask for help.

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• Satellite 3000 touchpad problem

  I have a Toshiba satellite 3000 PS300c and the touchpad doesn't seems to work but the pointer in the middle of the keyboard is always moving the mouse and when I tap on it, but the piece on the bottom isn't so I can right click or use the scroll wheel.

  Hello

  I don't know since when you have this problem, but it will be interesting to know if the appliance has been dismantled, but if the unit is not building together on the right track, it is possible that the touchpad will not work properly.

  Good bye

• HP 15 af-100nc: touchpad problem

  Hi, I have a problem with my touchpad Synaptics (15 HP, Win 10) - once I change the settings (two fingers scrolling etc), it resets the default settings after restart the laptop or simply close the session. Is someone has any idea how to fix? I would be grateful any advice! Thank you

  Step 01: Press and hold down the Windows key and press R
  
  Step 02: Please enter type regedit in the box run & hit
  
  Step 03: In the registry editor, navigate to the following
  
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install
  
  Inside, look for a key named DeleteUserSettingsOnUpgrade
  
  Step 04: Please right click on the key and select Edit
  
  Step 05: Now lets set the data value to 0 (zero) field and click Ok
  
  Note: Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on Thumbs Up white on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Satellite A200 - sensitivity Touchpad problem

  Hello.

  All of a sudden my touchpad has developed a mind of your own.
  If I go on something for a few seconds, it's as if I clicked it.

  It's really annoying because I was removing things that I don't want delete, selection of programs I want to choose etc.etc.

  I have looked at the Synaptics settings & can't find anything that can solve the problem, although I am totally thick when it comes to something like this.
  If anyone can offer a solution that, I understand I will be really, really grateful.

  Thanks in advance.

  Hello

  All you can do is to check all these settings, in particular to change the sensitivity level in the hope that this behavior will stop.
  Otherwise I do not see other was about visit Toshiba service.

  Is solution of using external mouse for you? I mean you can completely disable touchpad with FN + F9 and use an external mouse.

• Satellite C650 - Touchpad problem

  Toshiba Satellite C650 - 13G PSC08E I found that the touchpad, wasn't work and left click did not work, tried all the fixes on the forum.

  Check the BIOS and update
  Function key, fine activated

  That all controlled parameters appear in order, so I assumed a defective left click button.
  I bought the new palmrest with touchpad and after exactly the same problem.

  I can get it to work as a left-handed mouse, right button works as the left should, all other functions are fine except not left click.

  Surely, I couldn't be pretty unlucky to have bought a palmrest with broken so left click button (it's new)

  Any help would be appreciated

  What I will say maybe you were simply no chance and you had installed another faulty touchpad module, but to be honest, it will be very strange

  In my case, the control panel? mouse? last tab (Setup button) contain additional options to control the touchpad features.

  My laptop uses the touchpad Alps and the Alps touchpad utility is installed.
  This tool provides additional parameters for touchpad left and right, click.
  I did not change these options, but of course it of possible to disable the left and right click in this area.