Collection of verticle blue screen
transfer line blue screen to screen saver and any other program running
Hello
Probably your adapter of the monitor or the screen is defective and must be replaced. A simple test, if you can afford it, is to use another monitor. If the behavior is corrected, the original monitor is defective. If this isn't the case, then the graphics card must be replaced.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Tags: Windows
Similar Questions
-
Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.
https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip
DAG
These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.
If you continue to plant I remove Symantec and use the built in Defender
-
Separated from this thread.
Mr. Govind,
My computer had the same problem for three days and at the beginning I thought that someone or something is trying to access my computer because I never had this problem before. The first time it happened that I was watching Netflix and noise emissions became rough as if something was interfering with it. Out of nowhere my computer then blue with the error screen that you indicated above. The next day the same thing happened. Then the third day, the BSOF appeared and I just let it take its course instead of shut down my computer as I did the previous time. While everyone has had an endless loop, my computer was able to restart and works perfectly well. I wonder if there is nothing wrong with my computer and if there are what are the steps I need to take for repair?
Read the Wiki below, for instructions on how to download and share crash dump files, so we can determine what may have caused your system down.
How to provide the necessary files.
Blue Screen of Death, co-signed by ZigZag3143 & JMH3143
http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d -
I read my threads where people are facing this error blue screen dead on Windows 8, the cases are different but this error message is the same, I share picture of the error message, it looks like this.
My case
In my case when I turn the laptop for the first time it freezes, displays this error message and restarts normally. On the home screen, it shows me a message send this problem to Microsoft. Laptop works very well subsequently without any problem, even if I reboot later it loads fine, but if I stopped and starts from at the moment, it shows same error screen. When I look into the details, it shows me these details. draw the image.
I did it as a result of things to understand the issue:
- I thought it's a software problem, so I format my windows disk and reinstall Windows8 - the issue has not been resolved.
- One of my friends suggested me for a complete format, I moved my data to external HARD disk, formatted my entire drive, deleted partitions, make new partitions and installed Windows 8 - the issue has not been resolved.
- Someone suggested from material with my HDD to check it out, so I used a different HARD drive, formatted, deleted partitions, made new partitions and installed Windows 8 - the problem persists.
- Restore all settings to the default BIOS - the problem persists.
- I have connected HDD my friend with Windows 7 to check my machine and it worked fine.
In my research, I can't understand what is really the cause of this accident, there would not be any software parameter or virus as on formatting windows that all this problem would have been solved. It is not the HARD drive for sure as I have done everything I know to see if it's the HARD drive that is causing the problem.
Dear members and experts from Microsoft, this is the first time I participate on this forum and think that I explained everything concerning the problem I face and the research I did to solve this problem, I eventually failed, please guide me how I can solve it. My laptop is out of warranty and I don't want to pay for something that I do not know exactly.
Waiting for your expert advice.
Frébault
These related to the amd_sata.sys AHCI Advanced Micro Devices 1.2 device driver. Update to win 8.1 should solve this problem. If it isn't, you should check for motherboard update update BIOS and drivers.
-
Deadly blue screen (professional assistance)
Hi, I have a CQ60-116EE with P/N FY419EA #ABV and I have collected all the Xp drivers successfully, but before I started the downgrade to xp
I did a stupid thing by upgrading the Bios of A F.25 to F.32
Then I started from the xp CD, but I got a white screen while the dvd - rom reads CD
and what is happening until I get a fatal blue screen there is a hardware problem and so I rebooted and get my system Vista hated again
I don't know if the upgrade of the bios was the reason to get the screen empty rather than the screen normal installtion
SO my question is, is there is something wrong with the computer screen, and that's why I'm gettign the blank screen or
There is something wrong with the update of the bios.
Any help please
Message edited by CQ60-110ee 2008-12-31 04:54Message edited by CQ60-110ee 12/31/2008 12:54Okay, that was just the sata drivers, made download and used nlite to put it inside the xp installation
-
Blue screen with event report guid ABCE23E7-DE45-4366-8631-84FA6C525952
Hello world
first of all sorry for my English!
For a month, I have a few questions, but this time, it happens more often.
I have a BSOD (blue screen of death) and I checked in the collection of events and I saw different interesting eventsSystem
-Supplier
[Name] Microsoft-Windows-WER-SystemErrorReporting
[Guid] {ABCE23E7-DE45-4366-8631-84FA6C525952}
[EventSourceName] Error checking-EventID 1001
[Qualification] 16384
Version 0
Level 4
Task 0
Opcode 0
Keywords 0 x 80000000000000
-TimeCreated
[SystemTime] 2009-12 - 13 T 10: 39:41.000Z
EventRecordID 95204
Correlation
-Execution
[ProcessID] 0
[ThreadID] 0Channel system
Computer LAMOJETTE
Security
-EventData
param1 0x0000008e (0xc0000005, 0 x 00000000, 0 x 00000000, 0xaccb4a9c)
param2 C:\Windows\MEMORY. DMPI tried to look for solutions on google, but there are a lot of different problems. So can you help me on this please?
Hello
In most cases it of difficult to say what it might be
The BSOD may appear due to hardware or software problem.
In many cases that the BSOD can occurs because of memory problemsI recommend the RAM modules.
There are many free memory diagnostic programs that could help you check the memory.
If possible, try to replace the RAM with new modules -
For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.
Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.
So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.
Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?
Hi @kootstra,
From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.
I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.
This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.
There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers. Reset to will sometimes fix problems, so resetting is not the issue.
A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access. These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results. A wrong button push and you might no longer have a printer, but rather an expensive paper weight. On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!
Reset the printer: what you need to know
Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.
-
(P50) Blue screen during the BIOS update
Hello
I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...
(Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.
But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:
Your PC rann in a problem and must restart.
We are just collection that some info of the error, and then we will restart for you (xx % complete)If you want to learn more, you can search online later to this error:
System_service_exception (TdkLib64.sys)
A google search gives no results.
Comment to Moderator: Fixed URL.
Nice day.
I'm sorry that I can't help with the problem you are experiencing using updater .exe.
If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109
I hope this helps a little.
Kind regards.
-
blue screen saying turn off caching shadowing in bios then restarts
blue screen saying turn off caching shadowing in bios then restart... is the answer from the bios
Moved from feedback
original title: blue screen
Hi Michaeljonesvo,
To provide the proper resolution, I would need more information on your side.
1. which version of the operating system are you using?
2. What is the number of brand and model of the computer?
The BIOS (Basic Input Output System) settings are different for each computer according to the manufacturer of the computer. To make changes on BIOS settings or options, you may need to contact the manufacturer of the computer.
Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
However if you are able to start the computer normally, I suggest you to Zip or download the content of the C:\Windows\minidump
See the article for more information about how to download files using SkyDrive.
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65Please provide the necessary information to help you further, I'll be happy to help you.
-
I have the error 0x0000008e (0xc0000005 0x833de487 0xb8bff73c 0x00000000) with blue screen
Please help me with this...
Hello
What version of Windows?
Please ask to the repair of the appropriate system of responses - Windows (corresponding to your version)-
and recovery Forum.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows=================================================================
Methods of troubleshooting for help - these can be used for XP, Vista or Windows 7.
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I get the blue screen whenever I'm on a video call on Skype. I tried to reinstall it, but he keeps doing.
This is the main reason in July, I bought the laptop. And I'm afraid, it can get really bad damage if I don't do something.
The option to find and fix problems in the control panel menu does nothing for me.
Hello
Check with your system manufacturer support, their drivers and documentation online and ask in their forums
(as appropriate) about the known issues. Automatically search for updates for the drivers of network - WiFi (wireless) and the (wired) NETWORK interface card.
"generally" involved in the problem of this type.Check also with the support of Skype and their forums.
Skype - Support
https://support.Skype.com/en-us/Skype - Forums
http://Forum.Skype.com/=============
If necessary after the foregoing:
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How to: fix a blue screen
Original title: Suggestions on what to do to fix blue screen
Any suggestions on possible ways to solve problems 'Blue screen' could not continue.
Re: 1) I tried F8, choose last known good configurations
(2) the minidump files I tried w/a debugger crashes
(3) tried "you can zip minidump files in C:\Windows\Minidump folder brand available (provide link) through Windowslive SkyDrive or similar site?"
NO THIS WAS USEFUL! Minidump couldn't access or file folder & what has been able to record/file was empty.
Hello
Would help if we knew that your version of Windows and other information.
How to ask a question
http://support.Microsoft.com/kb/555375===============================================================
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
so time of the BSOD for more information on the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
Details of all application crashes occurred in your system. The information of the plant are extracted
the .wer files created by the Windows Error Reporting (WER) of exploitation component
system each time that an accident has occurred. AppCrashView also allows you to easily record the
list of accidents to the text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps.
-
Usbuhci.sys blue screen DRIVER_IRQL_NOT_LESS_OR_EQUAL d1
It is a blue screen I know at this moment please look in to it thank you
==================================================
Dump file: Mini041211 - 01.dmp
Crash time: 12/04/2011 03:38:55
Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug check code: 0x000000d1
Parameter 1: 0x00000008
Parameter 2: 0x00000002
Parameter 3: 0x00000000
Parameter 4: 0x929d21c8
Caused by the driver: usbuhci.sys
Caused by the address: usbuhci.sys + 51c8
File description: Miniport USB UHCI driver
Product name: Microsoft® Windows® Operating System
Company: Microsoft Corporation
File version: 6.0.6001.18000 (longhorn_rtm.080118 - 1840)
Processor: 32-bit
Computer name:
Full path: C:\Windows\Minidump\Mini041211-01.dmp
Number of processors: 2
Main version: 15
Minor Version: 6002
==================================================
==================================================
File name: usbuhci.sys
Stack address: usbuhci.sys + 51c8
Address: 0x929cd000
Address: 0x929d8000
Size: 0x0000b000
Time stamp: 0 x 47919050
Time string: 2008-01-19 12:53:20 AM
Product name: Microsoft® Windows® Operating System
File description: Miniport USB UHCI driver
File version: 6.0.6001.18000 (longhorn_rtm.080118 - 1840)
Company: Microsoft Corporation
Full path: C:\Windows\system32\drivers\usbuhci.sys
==================================================
==================================================
File name: USBPORT. SYS
Stack address: USBPORT. SYS + 40 c 9
Address: 0x8d1be000
Address: 0x8d1fc000
Size: 0x0003e000
Time stamp: 0x49e01fcf
Channel time: 2009-04-10 23:42:55
Product name: Microsoft® Windows® Operating System
File description: driver Port USB 1.1 & 2.0
File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
Company: Microsoft Corporation
Full path: C:\Windows\system32\drivers\USBPORT. SYS
==================================================
==================================================
File name: ntkrnlpa.exe
Stack address: ntkrnlpa.exe + f5b8c
Address: 0x8480c000
Address: 0x84bc5000
Size: 0x003b9000
Time stamp: 0x4c0e557c
Time string: 08/06/2010 09:36:44
Product name: Microsoft® Windows® Operating System
File description: NT kernel & system
File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
Company: Microsoft Corporation
Full path: C:\Windows\system32\ntkrnlpa.exe
==================================================Hello
Don't forget to update the BIOS, chipset of low level drivers, embedded and other large
device drivers - visit Site system manufacturer (manufacturer of motherboard for custom
systems) and the sites of the individual manufacturers. The "BOLD" contains the necessary drivers
update the USB system.-------------------
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65====================================================================
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.BCCode: D1 0x000000D1
Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
-
iastor.sys - address 828490B 8 physical memory base to @8280B 000, Date Stamp 48054343 - Crash Dump, dump - the disk of 100 I can work only in Mode without failure, but I can't print or scan that I need to do. Someone can help me.
Hello
Looks like you need to update iastor.sys:
iastor.sys = Intel Matrix Storage Manager driver - see System/card mother Maker and manufacturer of chipset.
This driver could perhaps was pushed to the fault by other programs such as Symantec/Norton.This driver is extremely difficult to install if you need system or the manufacturer of the motherboard (for custom
bed systems) help but you could also ask on their forums (if any).Also check the Intel downloads audit AFTER with the system/motherboard manufacturer...
Intel downloads
http://Downloadcenter.Intel.com/Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22More help on installing iastor.sys here (System Maker/card mother Maker first consult and use that as a last resort).
============================================================
More troubleshooting if necessary:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
A blue screen: Stop 0x8E and Stop 0xD1
Separated from this thread.
Please help me eith you same question
Hello
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashWe can analyze the minidumps if make them you available to the SkyDrive or another file sharing of sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialDownload pictures and files
http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
---------------------------------------------------------------------------------------------------
Are two main causes of this blue screen BIOS and video drivers - check with the system manufacturer's Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be that other drivers so check there. DISABLE the auto-pilot plant as those who are older and if Windows Updates suggest a pilot just HIDE. Antivirus is another possibility.
See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-BCCode: 8th 0x0000008E is the same as 0x1000008E
https://msdn.Microsoft.com/en-us/library/ff559271%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396=============================================
BCCode: D1 0x000000D1
Think video drivers especially if it may be others. Refer to the section of driver in my credits
methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
antispyway/antivirus/security programs can also cause this. Check the resolution of the problems andWhen you arrive at the driver and tests of memory sections do reference to generic methods in following
message and then back to the if necessary troubleshooting tool.BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-BCCode: D1 0x000000D1
https://msdn.Microsoft.com/en-us/library/ff560244%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
http://www.NirSoft.NET/utils/blue_screen_view.html
hangs and displays information about all accidents of a table - freeBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxYou can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlThis tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Iphone6 more does not illuminate
Can not turn on my iphone6 more
-
Why my iPad just asked me to change my password 4 digit?
Why my iPad just asked me to change my password 4 digit?
-
Spectrum x 360: 360 x crashes when it's on battery
I have a new spectrum x 360, custom build: regular HDTV, i7, 8 GB, 512SSD, Pro 8.1. I discovered that the machine has a problem of gel. The first day I used it, I had plugged and no problems. Yesterday, I started myself moving to the new system an
-
This morning, my sound devices have been working well. I could still hear the sounds of him. Before blocking down, I put the volume down to 0. When I opened it again this afternoon I couldn't hear all the sounds more. Help, please! I have Apowersoft_
-
unsyncing of the external media player device problem
problem unsyncing of the external device to media player, said click the arrow below the sync, point to the device and click the option UNSYNC, only 3 options below the sync button...1 Refresh device2 more options3 help with synchronization There is