Configure the send for Barracuda service connector

Similar Questions

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  Does anyone know the phone for Customer Service? Im trying to install an app and will not let me

  There is no support for this phone.

  you could get help if you could explain or you can try to contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• There seems to be a problem with the soft ware.  We use the CS6 for Records services and when we try to save the record, part of the record is stored. The record to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are generally

  There seems to be a problem with the software.  We use the CS6 for Records services and when we try to save the record, part of the record is stored.  Usually the recording to be saved as an mp3 file is 70 to 100 KB but recently only 3 KB are recorded.  What should I do to fix this?

  You may need to reset your preferences of hearing files stored in C:\Users\"username"\AppData\Roaming\Adobe\Audition\5.0. If you rename this folder in 5.0.bak that hearing won't find it when you open the next time if it will recreate a new settings with the default settings folder. See if hearing then works as expected.

• Failed to create field when you configure the domain for the UCM 11 g

  Hi all
  
  After installing the Oracle Weblogic 10.3.3 and ECM Oracle 11g, I configure the domain for the AAU with SCW. The wizard still fails, and error log is:
  
  2010-06-09 11:40:25, 984 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - build error!
  Traceback (innermost last):
  "< Iostream >" file, line 17, in there?
  TypeError: unsupported or operand types +: 'NoneType' and 'str '.
  
  at org.python.core.Py.TypeError (unknown Source)
  at org.python.core.PyObject._basic_add (unknown Source)
  at org.python.core.PyObject._add (unknown Source)
  to org.python.pycode._pyx31.f$ 0 (< iostream >: 17)
  to org.python.pycode._pyx31.call_function (< iostream >)
  at org.python.core.PyTableCode.call (unknown Source)
  at org.python.core.PyCode.call (unknown Source)
  at org.python.core.Py.runCode (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  at org.python.util.PythonInterpreter.execfile (unknown Source)
  
  Does anyone have an idea how to fix? Thank you.
  
  David

  Hey David,

  I got it exactly the same problem when I installed a few weeks back. Fortunately, the solution is simple.

  Make sure that you run the config (config.cmd or config.sh) script that is located in the %MIDDLEWARE_HOME%/Oracle_ECM1/common/bin/ directory as opposed to the standard Wizard. This runs the wizard for creating domain with a different set of parameters so that the jython script that executes orders WLST at the end does not fail. If you are using windows, and using the shortcut it is start-> programs-> ECM Oracle 11g - Home1-> configure application server. One of our other guys had a problem where the entry "start in" for this shortcut was bad as well. On mine it is % MIDDLEWARE_HOME%/Oracle_ECM1/install/bin.

  Hope that helps,

  Andy Weaver - Senior Consultant software
  Fishbowl Solutions< http://www.fishbowlsolutions.com?wt.mc_id="L_Oracle_Consulting_amw_OTN_ECM">

  Published by: Andy Weaver on June 9, 2010 07:38
  Typo fixed.

• How to configure the operation of asynchronous service with local local routing for the sending and the receipt of the request on the local node by default?

  I am facing a problem in the configuration of customer service operation which is asynchronous and has a local-to-local routing. When you try to configure that, it automatically assumes that it is an outgoing request.

  However, I want to treat it as an incoming query I want to send and receive the application on the same node.

  Can someone let me know steps?

  For an example, take a look at a tutorial I wrote on the Integration Broker.

  You can now download the tutorial for free including some source files:

  Broker integration for PeopleSoft Developer databases. Blogging about Oracle Applications

  Especially take a look at Chapter 5, where I describe the steps you must take to create a custom incoming service call this service of the PeopleCode. If you send a received message to PeopleSoft.

  The tutorial uses a synchronous service operation. Asynchronous replacement, the Manager of service for OnRequest to OnNotify.

  I hope this helps.

  Kind regards

  Halin

• Query about the tutorial for Oracle Service Bus (OSB 10 g 3)

  Hello
  
  I'm working on a tutorial for Oracle Service Bus (OSB 10 g 3).
  I created the service proxy and the Sales Department, using the Oracle Service Bus console.
  The details are the following:
  Proxy service: LoanGateway
  Service1 business: a value of 4.9 or less causes the message to be routed to ManagerLoanReview business.
  Business service2: a value equal to or greater than 5.0 causes the message to be routed to NormalLoan business.
  When I send the request message, so that it gets routed to the proxy service to one of the business service it gives following error.
  
  ---------------------------------------------------------------------
  
  Document request
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
  < / soap: Header >
  < soapenv:Body >
  < xmlns:exam review: processLoanApp = "http://example.org" >
  < loanRequest xsi: type = "java: LoanStruct" xmlns:java = "" java: normal nbsp "xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance">"
  <!-in option: - >
  < name: java > Smith < / java: name >
  <!-in option: - >
  < java: SSN 1234567 > < / java: SSN >
  <!-in option: - >
  < java: > 4.1 rate < / java: rates >
  <!-in option: - >
  < java: Amount > 9000000 < / java: Amount >
  <!-in option: - >
  < java: NumOfYear > 10 < / java: NumOfYear >
  <!-in option: - >
  < java: Notes > loan application examination Service Manager < / java: Notes >
  < / loanRequest >
  < / review: processLoanApp >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  
  
  Response document
  
  The invocation was an error:.
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < soapenv:Body >
  < soapenv:Fault >
  soapenv:Server < faultcode > < / faultcode >
  < faultstring >
  BEA-380002: tried them all: '1' address, but not able to connect via HTTP to the server: 'localhost', port: "7021 '
  < / faultstring >
  < detail >
  < con xmlns:con: fault = "http://www.bea.com/wli/sb/context" >
  < con: errorCode > BEA-380002 < / con: errorCode >
  < con: reason >
  Tried everything: '1' address, but not able to connect via HTTP to the server: 'localhost', port: "7021 '
  < / con: reason >
  < con: location >
  < con: node > RouteNode1 < / con: node >
  request pipeline - < con: path > < / con: path >
  < / con: location >
  < / con: fault >
  < / details >
  < / soapenv:Fault >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  
  
  Response metadata
  
  < con xmlns:con: metadata = "http://www.bea.com/wli/sb/test/config" >
  < tran:headers xsi: type = "http:HttpResponseHeaders" xmlns:http = "http://www.bea.com/wli/sb/transports/http" xmlns:tran = "http://www.bea.com/wli/sb/transports" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
  < http:Content-Type > text/xml; charset = utf-8 < / http:Content-Type >
  < / tran:headers >
  < tran:response - code xmlns:tran = "http://www.bea.com/wli/sb/transports" > 1 < / code tran:response - >
  < tran: encoding xmlns:tran = "http://www.bea.com/wli/sb/transports" > utf-8 < / tran: encoding >
  < / con: metadata >

  Tried them all: '1' address, but not able to connect via HTTP to the server: 'localhost', port: "7021 ' - indicates that BS is trying to connect to port 7021 on the local host;
  Are you able to telnet localhost 7021 machine running the BSO?
  Please check the file config.xml for the 7021 server port

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• ASA5505: Configure the ASA for IPSec and SSL VPN?

  Hello-

  I currently have my 5505 for SSL AnyConnect VPN connections Setup.  Is it possible to set up also the 5505 for IPSec VPN connections?

  So, basically my ASA will be able to perform SSL and IPSec VPN tunnels, at the same time.

  Thank you!

  Kim,

  Yes, you can configure your ASA to support the AnyConnect VPN IPSec connections and at the same time.  In short, for the configuration of IPSec, you should configure at least a strategy ISAKMP, a set of IPSEC, encryption, tunnel group card processing and associated group policy.

  Matt

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• How to configure the switch for JMS bridge

  Hello
  
  I tried with the selector option when working with several bridges, here is the scenario that I applied.
  
  Created five queues ( Q1, Q2, Q3, Q4, and Q5 ) and configured JMS bridge Destinations with each queue with the factory of unique connections ( CF1, CF2, CF3, CF4, and CF5 ) and baptized as D1, D2, D3, D4 and D5.
  Then created JMS JB2 bridges with D1 source and destination as D2. Similarly the JB3 as D1-D3, as D1-D4 JB4 and JB5 as D1-D5.
  And sector for each of the JB2 JB3 and JB4 JB5 as two, three, four and five respectively and reboot after the changes.
  
  Now I expect the following scenario to work
  By pushing the message to Q1/CF1 with two in the content of the message, so wait for the message to be delivered to Q2/CF2 through JB2, but messages is not moved by JB2.
  Similarly, message pushed to Q1/CF1 having three in the content of the message, so waiting for the message to be delivered to Q3/CF3 by JB3, but messages is not moved through JB3. Similar behavior for other messages with four and five in the content of the message.
  
  In the bridge configuration, selected QOS as "Atmost" - once.
  
  Note: all configurations were conducted in the same field and the WL version is 10.3.6.0 *
  
  The example message I am pushing to Q1/CF1 say 'two Test Data'* and expect to reach the queue Q2/CF2
  
  Concerning
  Venkata Madhu
  
  Published by: vv * Sep 12, 2012 13:05

  JMS selectors work normally om jms headers and not on the message.

  In my previous post, I see that WebLogic provides an extension "SELECTOR xpath" in this area, although I recommend using standard selectors when possible. See my previous post for more information on the syntax of the selector, etc.. The best resource on selectors is the javadoc for javax.jms.Message (http://docs.oracle.com/javaee/5/api/javax/jms/Message.html).

• Configure the listener for the data protection

  Hello world
  
  I'm currently caveat of data (physical standby database) for my database. But I have problem to configure the listening port on both servers. Can someone give me some examples?
  
  Oracle: 10g R2
  Operating systems: Windows
  Database primary ken10g
  backup database: ken10gbk
  
  Here are the contents of my files current listener on both servers:
  
  Primary server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP) (HOST =)(PORT = 1521) Primary_server)
  )
  )
  
  Backup server:
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = standby_server) (PORT = 1521))
  )
  )
  
  Thanks in advance.
  
  Ken

  This should always work on Oracle 10.

  ---------------------------

  Main example

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PRIMARY)
  (ORACLE_HOME=/u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = PRIMARY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

  Example of Eve

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/network/admin/listener.ora
  # Generated by Oracle configuration tools.

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = host) (PORT = 1521))
  )
  )

  SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = STANDBY)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0)
  (GLOBAL_DBNAME = STANDBY_DGMGRL. Host)))

  ADR_BASE_LISTENER = / u01/app/oracle

• Where can I download the needed for XP, service pack 3?

  Mine went corrupt, and I lost the original disk.

  The drivers for the hardware?  Each manufacturer of components of support and/or download the web page and/or the computer system as its manufacturer's web page together model...

  (What is the brand and model of your computer)?

• How to configure the adapter for network WRT54G wireless

  I downloaded the driver for a tenda usb adapter.  What else should I do to connect to the network WRT54G? I am currently connected via an ethernet cable. Running Windows/7.

  TIA,

  Phil

  OK, I found out how locate network and connect. The only problem was that I used the password instead of the key WEP.