DeskJet F4480: Impression of the new cartridge, blurred

Similar Questions

• DeskJet 2132: Do not print with the new cartridge

  I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

  I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

  I tried to put back the cartridge several times and made sure the protective film is removed completelu.

  I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

  HI @saking88,

  Welcome to the Forums of HP Support!

  I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

  HP DeskJet printers 2130 - color or black ink print do not.

  This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• HP 5530 Envy: How to clean a leak before installing the new cartridge

  I haven't used my cartridge color for a long time, and now I see that the contacts are a little disordered (a few leaks). How can I clean before installing the new cartridge? Q-Tip and alcohol?

  Hi @PMarlene

  Just a non fluffy and distilled (or bottled) water works better...

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/document/c03743431/

  

• When the new cartridges I get testpage first when I give a print command

  When the new cartridges I get testpage first when I give a print command

  Hello

  This sounds as if it were a feature of the printer driver.

  The best thing to do in this case is to contact the manufacturer of the printer.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• the HP Color Laserjet 3800: HP 3800 will not recognize the new cartridge cyan

  I tried to put back several times, turn off print and on. No luck. I just ordered these toner cartridges and they arrived today. I'm a graphics on a tight schedule. Help!

  Well, the new cartridge arrived and I got the same message. I called the IT company I have dealt with 15 and told him about the problem. They sent a technician who inspected the receptacle for the cyan cartridge and with a flashlight and his right hand, explores every inch of the cavity. He drew his hand with a piece of black plastic no more than a quarter of an inch long. It's on the right side of the floor of the cavity, completely backward. When he reinserted the cyan cartridge and turned on the printer, MESSAGES of ERROR NO MORE! I am so relieved and so embarrassed at the same time where I couldn't find this little piece of plastic myself.

  Thanks again for trying to diagnose the problem.  You have been great!

• Uneven printing with the new cartridge

  I have a Color LaserJet 2605dn printer and have just replaced the magenta cartridge - previous leaked toner in the printer.

  The new cartridge does not print evenly.  It is the color at the center of the page, gradually fading to almost nothing on both sides.  I printed several pages and gave the cartridge a series or shake well, nothing helps.  The other cartridges are more than half full and print perfectly.

  This suggests a problem with the new cartridge?  Or is there anything else I can try?

  Thank you.

  See attachment.  Not for the faint at heart.

• With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  Hello, I have Norton antivirus and apparently everything is installed correctly but when I click the icon on the desktop after a very short time, the message appears.  I have an Acer Aspire V3 windows 8.1 - 64 bit

  I am trying to solve this problem since last week.  No change at all.  (I uninstalled all the components of the front range of HP printers)  The printer I have is HP C6250 all-in-one.

  I followed all the steps in the HP website and a couple of nights, it seemed that everything was working, when I prayed me to turn on the printer, one of the color ink cartridges more than ink and I could not finish the job.  With the new cartridge is already installed, I can't retrieve the set to the top of page to complete the installation.

  I thank very you much.

  Unless you have installed the full software from HP support features, none of the options on the cartridges of ink or HP Diagnostics will work

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=3308554

  And if you bought "compatible" ink cartridges and not genuine HP that you receive msgs error cartridge like the habit of these cartridges compatible function with the HP software

• Bad print quality with the new cartridge

  I replaced the cartridge on my HP Photosmart c4680 printer a few weeks ago and the print quality looks as if it is low on ink. I followed the instructions on alignment after installation and made sure that I installed the new cartridge. There is no prompt that the ink is low. The other weird thing is sometimes the printer does not start when I turn it on. The screen reads HP and he begins to beep every 10-15 seconds or more. This problem occurs intermittently, but began after the installation of the new cartridge. Would appreciate any help to solve these problems.

  (1) pull the cartridge out and reinsert it, if there is a latch to ensure she fully locking up.

  (2) your HP software for the printer should include several utilities, one such utility is to print a page of 'Test '. Run that usually it will clean the print head.

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/printers-and-all-in-ones/print-a-diagnostic-page/1245169387001/printing-a-test-page---HP-Photosmart-c4795-all-in-one-printer/video/

  Now try printing one of your documents.

  J W Stuart: http://www.pagestart.com

• Printer HP 6500 E709n - impression is very low, even after the new cartridges installed

  New cartridges installed correctly, and there is no error message. But now, the impression is almost unreadable it's so light. What is the problem?

  I understand that you are having problems print quality with low impressions.  I've included a useful document that might solve your problem.

  Let me know if it helps.

• DeskJet f4480 won't read new ink cartridge

  I end new yesterday, hp ink cartridges the printer will read that black very well, it will NOT read the color. I just get a message saying that my ink level is low, and it will not be printed. the store won't refund my money or give me a new cartridge because it is open. I can't buy a new one.

  What can I do to make the printer see he is a new cartridge and it has actually ink inside?

  There are several solutions available in this article I would recommend to exercise:
  http://support.HP.com/us-en/document/c00864517

  This may be a problem with the contacts for transport does not properly communicate with the cartridge. Also, make sure that the protective tape has been removed from the cartridge.

  Beyond the steps in this article, if you still experience the problem, I would recommend contact HP telephone support. Here you will find the contact information for the North America:
  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html

• 4610 Deskjet series: deskjet 4610 series does not print black despite the new cartridge

  Nice day

  I knew that my printer ink level was low. I printed a paper of 10 pages black and white last night and the ink quality was very good. When I printed an extra page, there is no ink on the page. I replaced the ink cartridge today. There is still no black ink printing. The test page is only released in color. Print dark colors. The cartridge is a genuine HP cartridge. The printer is only 2 and a few years.

  Your comments and help would be greatly appreciated.

  Thank you

  Follow the info here.

  http://support.HP.com/us-en/product/HP-OfficeJet-4610-all-in-one-printer-series/5101228/model/5101230/document/c03944809/

  Let us know.

• printer does not recognize the new cartridge installed

  How can I get my HP deskjet printer to regonise I installed a new HP cartridge.

  Had to replace 2-magenta fine;  black photo (2 new cartridges tried) message-no ink.

  Have cleaned the contacts on the cartridge & printer. still no joy. What can I do next?

  Hello! Had a second go to cleanup & reinstall & all works well.

  Thank you!!

• DeskJet 832c disappeared ink after new cartridges installed.

  I have a deskjet 832c missing ink after installing new cartridges (23/45).   Strange, but just recently, it does not print MS Word doc but prints OutLook e-mail.  Test page prints OK but faded.  B & W only options but no change and tried to color.  Removed the printer and let Win re-find-the XP (drivers) and no change.  any ideas?

  No lights or error messages.

  No new application installed on the PC.

  O/s updates are performed regularly.

  Identify the root cause.  The date code on the cartridge has been since 2008!  Apparently, I had an old cartridge laying around and finally take advantage.  After the installation of a "fresh" cartridge (2014 date code), the printer is back to normal.

  I always find it interesting that 2008 cartridge didn't print documents from MS word but print e-mail and test pages OK (but faded) w / the option to print black and white...

  in any case, case closed.

• How can I identify the original cartridge? What is the warranty on the new cartridge?

  Dear Sir.

  I buy a new cartridge No. 21 last month. now it does not. Please tell me where it will replace in haryana.

  I am including a link which explain the Hp warranty on its ink below.  I am also including a link that will help you identify the genuine Hp ink cartridges.

  HP warranty

  Authentic Hp inks