Device infrared consumer

So I just uninstall the device consumer infrared since it was reported in Device Manager. I heard on some forums that if you have uninstalled it and reboot, the system will try to reinstall again. so, I checked the Device Manager and found no infrared peripheral consumers. So, how can I recover it or install it back? pls help. ~

Hello

Download ENE CIR Installer on the link below and save it to your desktop.

FTP://ftp.HP.com/pub/SoftPaq/sp44501-45000/sp44983.exe

Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

Where can I find a reader fo device a consumer cell phone sent?

I just activated my new phone cell sent consumer and one of their support people assured me I could use the charge cord to hook it to my PC to download photos. When I tried the attempt failed because Windows 7 could not find a device driver compatible for the phone. Can someone tell me where I can find the right driver?

Thank you

Hello

Thanks for posting your query on the Microsoft Community.

I would like to know some information.
1. What is the error message that is accurate or complete?
I suggest you refer to the Microsoft Help Articles below and check if that helps.

http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

You can also check:

Automatically get recommended drivers and updates for your hardware

http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

Qosmio G40 - infrared chipset not detected by Windows 7

I upgraded to Windows 7 from Vista and found that my infrared chipset (SMSC SIO1049 SuperIO chip) does not appear in Device Manager.
According to this page, it should appear as an unknown driver (ACPI\SMCB0C0)
http://msdn.Microsoft.com/en-us/library/dd567986.aspx

The IR remote control provided by Toshiba does not work (it used to work fine under Vista). All the world had the same problem B4? How to fix you (if you resolved at all)?

Does this mean that Ineed to wait for the next update of the BIOS (my BIOS version is 2.20)?

My computer is a Qosmio G40 PQG40 02201NCE.

Hello

If the device is not visible in the Device Manager, not even as an unknown device, then this means that the device does not exist or was not detected by the BIOS.

Usually, the infrared receiver must be visible in the Device Manager under:
Human interface devices - > infrared receiver SMSCIR

In system devices, you should see the device consumer infrared.

Don't forget that you have enabled devices hidden sow option perhaps of Device Manager, then you might see this

Please also check the BIOS
I'm not very well if the infrared device option would be listed in the BIOS, but you should check it m

BSOD (pilot Consumer IR and IR receiver)

So I was do the BSOD and I went into (safe mode) Device Manager and found that my device (CID) Consumer IR in my system devices has something wrong with it, then I scrolled down to look in the USB controllers, it's something called "eHome Infrared Receiver (USBCIR) has something wrong with it also!

I don't know what to do, I checked the two updates, and people with disabilities the two of them and restarted my computer.

I don't know if one of the dysfunctional pilots affect the other. Please help, don't know what to do! Thank you

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

If you are overclocking stop. (chances are that if you are unsure if you are, you are not)

To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

The procedure:

* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

* Zip up the copy (compress)

* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

Link to find out how to download below.

http://www.WikiHow.com/use-SkyDrive

To ensure the minidumps are enabled:

* Click Start, in the search box, type: sysdm.cpl, press ENTER.

* On the Advanced tab, click Startup and recovery... Settings button.

* Make sure that automatically restart is unchecked.

* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

* OK your way out.

* Reboot if changes have been made.

Please also run MSinfo32 and download the output as well.

To run MSinfo32 please go to start > run > MSinfo32

Go to 'file', 'save' and download the PDF is saved with the DMP

System specs are extremely useful then please include everything you know.

Blue screen view and that crashed are often wrong and should only be used in case of emergency...

Troubleshooting of Windows/source here

You can learn more about BSOD here

You will learn how to test your memory ici

An effective question gets help more quick read how here

Pilot auditor-stalking a GIS behave driver here

The system configuration utility MSCONFIG, is here

Team Zigzag3143.com

Computer laptop screen goes black when the HDMI cable is connected

Help me please

A few days before, after upgrading to windows 7 from Vista. I got my laptop connected to my 47 inch Phillips with HDMI and was doing great. The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything... I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour) If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

Please help me. Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.) This thing cost me 5 k and there was nothing else to headaches. He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me. Thanks again for the help.

II. Configuration

Processor (s)
- Processor - 1
  - CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
  - CPU_Manufacturer-GenuineIntel
  - CPU_Caption-Intel64 family 6 model 23 Stepping 10
  - CPU_Version-model 7, walk 10
  - CPU_ProcessorId-BFEBFBFF0001067A
  - CPU_CurrentClockSpeed - 2534 MHz
  - CPU_AddressWidth-64 bit
  - CPU_DataWidth-64 bit
  - CPU_SocketDesignation-Socket 479
Case color - black

System memory
- Memory-1 module
  - Mem_Capacity - 4096MB
  - Mem_BankLabel-DIMM #1
  - Mem_Type-DDR3
  - Mem_Frequency-MHz
- Memory Module-2
  - Mem_Capacity - 4096MB
  - Mem_BankLabel-DIMM #2
  - Mem_Type-DDR3
  - Mem_Frequency-MHz
BIOS information
- BIOS_Manufacturer-Alienware
- BIOS_Name - worm 1.00PARTTBL A01
- BIOS_Version1-A01
- BIOS_Version2-ALWARE - 6040000
Information of the motherboard
- MB_Manufacturer-Alienware
- MB_Product
- MB_SerialNumber-.4Q9V4K1. .
- MB_Version-A01
Video adapter
- Video_Caption-NVIDIA GeForce GTX 280M
- Video_AdapterRAM - 1024Mo
- Video_DriverVersion - 7.15.11.7985
Hard drives
- SSD SAMSUNG PM800 Se SCSI Disk Device
  - Disk_Model - SSD SAMSUNG PM800 Se SCSI Disk Device
  - Disk_Size - 256GB
  - Disk_TotalHeads - 255
  - Disk_TotalCylinders - 31132
  - Disk_TotalTracks - 7938660
  - Disk_TracksPerCylinder - 255
Optical drives / other storage
- TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device
OS - MS Vista Home Premium 64

Version of DirectX-10

Assembler initials-RR

Initial Tester - HAVE

Test Date-09/07/2009 03-23 h

Burn-In/benchmarks
- 3DMark Vantage 1.01
  - AWMarks AWMark Score - 10659
  - Graphics Score - 10850 Points
  - CPU Score - 10125 Points
  - Figure 1 - Jane Nash - 31 FPS test
  - Test chart 2 - new FPS from Calico-32
  - Test CPU 1 - Test of the Plans/S I-1364
  - CPU Test 2 - Physics-14 steps/S
  - Test 1 - Texture Fill - 1034 FPS featured
  - Test 2 - Color Fill - 5 FPS featured
  - Test 3 - POM-26 FPS featured
  - Function Test 4 - GPU Cloth-18 FPS
  - Function Test 5 - GPU particle-24 FPS
  - Function Test 6 - noise Perlin - 44 FPS
The IRQ configuration
- 0 - available-
- 1 PS/2 standard keyboard
- 2 - available-
- 3 - available-
- 4 - available-
- 5 Ricoh Memory Stick Controller
- 5 Ricoh SD/MMC Host Controller
- 5 Ricoh xD-Picture Card Controller
- 5 SDA Standard compatible SD Host Controller
- 6 - available-
- 7 - available-
- 8 high precision event timer
- 9 - available-
- Infrared receiver ITECIR 10 (CBS)
- 11 - available:
- 12 Synaptics PS/2 Port TouchPad
- Digital data processor 13
- 14 RICOH OHCI Compliant IEEE 1394 Host Controller
- 15 - available-
- 16 NVIDIA nForce Serial ATA Controller
- Standard enhanced PCI to USB Host Controller 16
- 17 high Definition Audio Controller
- 18 PCI standard PCI to PCI bridge
- 18 standard enhanced PCI to USB Host Controller
- NVIDIA GeForce GTX 280M 19
- OpenHCD USB host controller standard 19
- NVIDIA GeForce GTX 280M 20
- 22 NVIDIA GeForce 9400M G
- 23 Broadcom 802.11n network adapter
- 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
- OpenHCD USB host controller standard 23
- System compatible ACPI Microsoft 190
Various

Final control

Installed device drivers
- Microsoft adapter, 21/06/2006, 6.0.6001.18000
- Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
- Infrared receiver ITECIR (EC), 18/12/2007, 5.0.4.6
- Standard keyboard PS/2, 21/06/2006, 6.0.6001.18000
- Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
- Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
- Enumerator Microsoft Bluetooth, 21/06/2006, 6.0.6001.18064
- Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
- Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
- Bluetooth L2CAP interface, 23/01/2008, 6.2.0.1200
- Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
- Audio stereo Bluetooth, 28/01/2008, 6.1.0.4000
- Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
- IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
- Compatible device HID, 21/06/2006, 6.0.6001.18000
- Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
- Compatible device HID, 21/06/2006, 6.0.6001.18000
- Keyboard Microsoft eHome, 21/06/2006, 6.0.6001.18000 remote control
- Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
- MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000 Microsoft eHome
- Mouse compatible HID, 21/06/2006, 6.0.6001.18000
- Compatible device HID, 21/06/2006, 6.0.6001.18000
- Device keyboard HID, 21/06/2006, 6.0.6001.18000
- Mouse compatible HID, 21/06/2006, 6.0.6001.18000
- Device of consumer control in line with the HID, 21/06/2006, 6.0.6000.16386
- NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
- NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
- NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
- NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
- Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
- Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
- RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
- Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
- Ricoh xD-Picture, 16/06/2008, 6.0.1.13 card controller
- Broadcom 802.11n network adapter, 28/01/2009, 5.10.79.7
- facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
- Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
- TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
- SSD SAMSUNG PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
- Shadow-generic volume, 21/06/2006, 6.0.6000.16386
- Webcam integrated, 27/12/2008, 1.1.1.1227
- USB Human Interface device, 21/06/2006, 6.0.6001.18000
- Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
- USB Human Interface device, 21/06/2006, 6.0.6001.18000
Do not forget that this upgrade to Windows 7 now. Thank you

My best guess, not knowing what updates you have loaded, would be that you got a video update from Microsoft that may not be 100% compatible with your laptop. I would go to the manufacturer website and download the latest video drivers for your laptop and install them according to the manufacturer's suggestions.

"Vukne" wrote in the new message: * e-mail address is removed from the privacy... *

Help me please

A few days before, after upgrading to windows 7 from Vista. I got my laptop connected to my 47 inch Phillips with HDMI and was doing great. The next day there was significant (about 40 of them, hardly some I'm sure) updates of microsoft; my laptop kept reset rear to decrease the resolution after the system has rebooted, instead of the 1920 x 1200 I usually.

Anyway, at this point on whenever I plug the HDMI Cable my computer screen making mobile curtains blackout and nothing he will answer to display anything... I had to unplug the cable and reset it réinitialisez_(: (afin d'obtenir l'écran d' ordinateur portablepour) If I let the plugins of HDMI cable, it will be blackout after it surging, the ms logo.

Please help me. Below you will find all the info about my M17x so-called:(honnêtement, n'achetez pas d'ordinateur portable Alienware.) This thing cost me 5 k and there was nothing else to headaches. He is a year old and I have no warranty left, so I must rely on the computer guru like you to help me. Thanks again for the help.

/ II. Configuration

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
/Processor (s)
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* Processor - 1
* CPU_Name-Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz
* CPU_Manufacturer-GenuineIntel
* CPU_Caption-Intel64 family 6 model 23 Stepping 10
* CPU_Version-model 7, walk 10
* CPU_ProcessorId-BFEBFBFF0001067A
* CPU_CurrentClockSpeed - 2534 MHz
* CPU_AddressWidth-64 bit
* CPU_DataWidth-64 bit
* CPU_SocketDesignation-Socket 479

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Case color - black
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
System memory
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* Memory Module-1
* Mem_Capacity - 4096MB
* Mem_BankLabel-DIMM #1
* Mem_Type-DDR3
* Mem_Frequency-MHz
* Memory Module-2
* Mem_Capacity - 4096MB
* Mem_BankLabel-DIMM #2
* Mem_Type-DDR3
* Mem_Frequency-MHz

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
BIOS information
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* BIOS_Manufacturer-Alienware
* BIOS_Name-worm 1.00PARTTBL A01
* BIOS_Version1-A01
* BIOS_Version2-ALWARE - 6040000

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Information of the motherboard
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* MB_Manufacturer-Alienware
* MB_Product
* MB_SerialNumber-.4Q9V4K1. .
* MB_Version-A01

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Video adapter
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* Video_Caption-NVIDIA GeForce GTX 280M
* Video_AdapterRAM - 1024Mo
* Video_DriverVersion - 7.15.11.7985

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Hard drives
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* SAMSUNG SSD PM800 Se SCSI Disk Device
* Disk_Model-SAMSUNG SSD PM800 Se SCSI Disk Device
* Disk_Size - 256GB
* Disk_TotalHeads-255
* Disk_TotalCylinders-31132
* Disk_TotalTracks-7938660
* Disk_TracksPerCylinder-255

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Optical drives / other storage
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
OS - MS Vista Home Premium 64
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Version of DirectX-10
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Assembler initials-RR
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Initial Tester - HAVE
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Test Date-09/07/2009 03-23 h
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Burn-In/benchmarks
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* 3DMark Vantage 1.01
* AWMarks AWMark Score - 10659
* Graphics Score - 10850 Points
* CPU Score - 10125 Points
* Test 1 - Jane Nash-31 FPS chart
* Test 2 - new Calico-32 FPS chart
* CPU Test 1 - Test of the Plans/S I-1364
* CPU Test 2 - Physics-14 steps/S
Have test 1 - Texture Fill-1034 FPS
Have test 2 - Color Fill-5 FPS
Have test 3 - POM-26 FPS
Have test 4 - GPU Cloth-18 FPS
Have 5 test - GPU particles-24 FPS
Have test 6 - noise of Perlin - 44 FPS

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
The IRQ configuration
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* 0 - available-
* 1 PS/2 standard keyboard
* 2 - available-
* 3 - available-
* 4 - available-
* 5 Ricoh Memory Stick Controller
* 5 Ricoh SD/MMC Host Controller
* 5 Ricoh xD-Picture Card Controller
* 5 SDA Standard compatible SD Host Controller
* 6 - available-
* 7 - available-
* 8 high precision event timer
* 9 - available-
* Infrared receiver ITECIR 10 (CBS)
* 11 - available:
* 12 Synaptics PS/2 Port TouchPad
* Digital data processor 13
* 14 RICOH OHCI Compliant IEEE 1394 Host Controller
* 15 - available-
* 16 NVIDIA nForce Serial ATA Controller
* 16 standard enhanced PCI to USB Host Controller
* 17 high Definition Audio Controller
* 18 PCI standard PCI to PCI bridge
* 18 standard enhanced PCI to USB Host Controller
* NVIDIA GeForce GTX 280M 19
* OpenHCD USB host controller standard 19
* NVIDIA GeForce GTX 280M 20
* 22 NVIDIA GeForce 9400M G
* 23 Broadcom 802.11n network adapter
* 23 NVIDIA nForce 10/100/1000 Mbps Ethernet
* OpenHCD USB host controller standard 23
* System compatible ACPI Microsoft 190

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Various
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Final control
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

http://social.answers.Microsoft.com/forums/en-us/HR.gif>
Installed device drivers
http://social.answers.Microsoft.com/forums/en-us/HR.gif>

* Microsoft adapter, 21/06/2006, 6.0.6001.18000
* Intel (r) Core (TM) 2 Extreme CPU Q9300 @ 2.53 GHz, 21/06/2006, 6.0.6001.18000
* ITECIR Infrared Receiver (EC), 18/12/2007, 5.0.4.6
* Standard PS/2 keyboard, 21/06/2006, 6.0.6001.18000
* Method of battery on the control compatible ACPI Microsoft, 21/06/2006, 6.0.6001.18000
* Synaptics PS/2 Port TouchPad, 14/05/2009, 13.0.6.0
* Microsoft Bluetooth enumerator 21/06/2006, 6.0.6001.18064
* Bluetooth hands-free Audio, 28/01/2008, 6.1.0.4000
* Bluetooth hands-free Audio., 01/28/2008, 6.1.0.4000
* Bluetooth L2CAP Interface, 23/01/2008, 6.2.0.1200
* Bluetooth Remote Control, 28/01/2008, 6.1.0.4000
* Bluetooth stereo Audio, 01/28/2008, 6.1.0.4000
* Microsoft eHome Infrared Transceiver, 21/06/2006, 6.0.6001.18000
* IDT High Definition Audio CODEC, 19/03/2009, 6.10.0.6162
* HID-compliant device, 21/06/2006, 6.0.6001.18000
* Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
* HID-compliant device, 21/06/2006, 6.0.6001.18000
* Microsoft eHome Remote control keyboard keys, 21/06/2006, 6.0.6001.18000
* Microsoft eHome MCIR keyboard, 21/06/2006, 6.0.6001.18000
* Microsoft eHome MCIR 109 keyboard, 21/06/2006, 6.0.6001.18000
* Mouse compatible HID, 21/06/2006, 6.0.6001.18000
* HID-compliant device, 21/06/2006, 6.0.6001.18000
* HID Keyboard Device, 21/06/2006, 6.0.6001.18000
* Mouse compatible HID, 21/06/2006, 6.0.6001.18000
* Device control HID-compliant consumer, 21/06/2006, 6.0.6000.16386
* NVIDIA GeForce GTX 280M, 23/04/2009, 7.15.11.7985
* NVIDIA GeForce 9400M G, 23/04/2009, 7.15.11.7985
* NVIDIA nForce 10/100/1000 Mbps Ethernet, 29/08/2008, 67.8.6.2
* NVIDIA nForce Serial ATA Controller, 18/08/2008, 10.3.0.42
* Ricoh Memory Stick Controller, 19/06/2008, 6.0.1.13
* Host to the Standard SD compatible SDA, 21/06/2006, 6.0.6001.18000 controller
* RICOH OHCI Compliant IEEE 1394 Host Controller, 21/06/2006, 6.0.6001.18000
* Ricoh SD/MMC Host Controller, 09/09/2008, 6.0.3.19
* Ricoh xD-Picture Card Controller, 16/06/2008, 6.0.1.13
* Broadcom 802.11n, network card, 28/01/2009, 5.10.79.7
* facap, FastAccess Video Capture, 24/09/2008, 8.7.1.0
* Microsoft iSCSI Initiator, 21/06/2006, 6.0.6001.18000
* TSSTcorp DVD +-RW TS-T633A SCSI CdRom Device, 21/06/2006, 6.0.6001.18000
* SAMSUNG SSD PM800 Se SCSI Disk Device, 21/06/2006, 6.0.6001.18000
* Snapshot of generic volume, 21/06/2006, 6.0.6000.16386
* Integrated Webcam, 27/12/2008, 1.1.1.1227
* USB Human Interface Device, 21/06/2006, 6.0.6001.18000
* Generic Bluetooth adapter, 21/06/2006, 6.0.6001.18064
* USB Human Interface Device, 21/06/2006, 6.0.6001.18000

Do not forget that this upgrade to Windows 7 now. Thank you

Problem with remote control in Windows 7 Ultimate

Hi guys,.

I encountered a problem since I upgraded my HP Pavilion Elite m9651me from VISTA to Windows 7 Ultimate 64-bit

the remote control has stopped working & I tried to look for a solution but no luck.

Please can you help me with this problem

Thank you.

Published by looks on 02/11/2009 04:51

Hi Jajomafa,

My problem was resolved a few days ago.

There was that an update of microsoft scored an important in the updates of windows, those I have installed my remote update started woking as if it were before.

The name of the update was (AVerMedia AVerMedia - Streaming Media and broadcast devices - receiver consumer infrared)

I suggest that you run the automatic update.

I hope this helps.

Kind regards.

HIS 60 wireless standard

My SA 60 watch a PBA fast device infrared Port SP1 SMC and that it works correctly. I can't understand what is the standard. I have a modem WIFI 802. 11b standard, but the SCM does not connect to it. Thank you.

Hello

I'm a little confused about your question. First, you talk the infrared device, and then you're suddenly in the world of Wireless LAN. These are two completely different things. The IR interface communicates via infrared rays (just like your remote control for TV) while the Wifi-devices communicate via radiosignals - much the same way the news comes in your radio.

BR

Tom

How to connect my CT50 booklet to PC Windows XP Home edition?

I have a booklet CT50 works under Windows 95 with a docking station. Can someone tell me the best way to transfer files, such as large documents and images, between this and my laptop Windows XP? The booklet floppy drive I have works fine for small files, but is obviously limited. I tried the device infrared, but without success. Two computers can be connected somehow? Thank you.

Hello

See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170#11170

Maybe this will help you!

Problems with music (stop) playing and attachment

Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:

(1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.

(2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...

Some of the people with the same problem on other forums.

Clues?

Which Motorola could maybe check this? Don't know if this Froyo associated...

Kind regards

Tiago.

Hello.

on the subject of 1) Milestone 2 has a mobile hotspot, not home (ad hoc mode). If you would link to the Milestone 2 the same way as on your WiFi at home.

You are able to find the Milestone 2 Hotspot as a router, once it starts?

(2) first of all, please check if the connected music player is not included in auto taskmanagers builtin off list.

Then check if the time-out in the connected music player is disabled.

I had this problem once. After a reset, the player worked fine again, so this might also be worth a try.
```
tiago_br wrote:
Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far:
(1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'default' on the type of APN, he is able to connect to 3 G, but the ad hoc network is not broadcast.
(2) simple can not play music... actually, it plays for about 1 minute or so and stops. Music app is still running (I tried embeded music + and Cubed) but the music is stopped, not paused. This occurs when you are using headphones or without, when pluged to feed or not...
Some of the people with the same problem on other forums.
Clues?
Which Motorola could maybe check this? Don't know if this Froyo associated...
Kind regards
Tiago.
```

deleted something by mistake please help.

well basically. I play a game and under human interface devices, infrared controller (which allows me to use a remote control one believe) had to be dfisabled and I accidently deleted, that's my problem,.

Try a system restore:

Restore point:

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

Do Safe Mode system restore, if it is impossible to do in Normal Mode.

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

See you soon.

Mick Murphy - Microsoft partner

Transcode DLNA 7 broken Windows

Windows 7 DLNA automatically transcode .wav-.mp3 > lossless when transmitted. Vista did not do that. I have a gigabit wired network. My active DLNA devices support .wav! They worked perfectly under Vista. I don't want not transcoded. What device does not support the .wav? It is really part of the DLNA standard!

I hope that you have a work around I just spend $ 500 to put this system in place!

I have a collection of over 400 CD all stored in .wav lossless format. This format is essential because I'm streaming dts CD and YES I can make a difference on my stereo mp3 and .wav. (There is some loss of high details).

Don,

Thanks a lot for your comments and I'm sorry for the trouble. I had briefly move this thread that is happening to me by Barb, and here is the explanation and possible solution for your trouble. First of all, let me see if I understand the problem: MP3 stream that goes to your device is not only a white noise. This is the real song you're trying to play, but quality is not one that satisfies you, right?

The reason of why it worked on Vista was because Vista was limited in features of transcoding. Win Vista doesn't have transcode to MP3 and that's why the device you can not pick up the MP3 version. Win7 on the other side, wants to allow to more devices to consume content from a PC. We want the devices not to worry much about codecs. If they support what mandates DLNA (PCM and MPEG2), they will be able to stream content from a PC Win7 (from WMA to AVCHD). Of course there must be a side effect: the quality degrades. While for most people, that's fine, there are people who know exactly what they want and more high quality. This is why I am glad I got your feedback.

Now, you mentioned scenarios: SWEATER (when you pull on the contents of the device) and PUSH (when you Play the content of the device). The fundamental difference is that, in a scenario of TRACTION, the unit has all the control by picking up the right URI to a specific media item. In the scenario of Play, Win has the first option, but the device can still choose. Here's how it works:

-win7 provides for each piece of media supported in the library for a list of what we call the RES elements. These items are associated with each media item XML tags and contains metadata that specify the settings of each format provided by this specific RES element (e.g.: bitrate, resolution, DLNA profile_name, mime type, size, duration, etc.). For a file M4A for example provide us alternatives RES elements corresponding to MP3, WAV/PCM and WMA (for each size RES elements with various parameters)

-peripheral content PULL-ing, sailing on the server, search the item that she needs and that it checks the elements of RES. Each device has its own algorithm to choose the right item for RES, it's for them to decide what to play

-When PUSH-ing, Play navigation, check the capabilities of the device (usually types mime and associated names of DLNA profile) and decided what element RES can push to the device, based on an algorithm of corresponding content. As a rule of thumb, Play prefer MP3 or PCM in that order. (By the time where we did Play it any device capable of Play, so whatever is undesirable, we found to test with, were used to support MP3 more than PCM.) So that is why we decided this way, but it turned out to be bad last year after we ship and good cameras began to appear). However, we check all items in RES and if there are other correspondents the features of the device (like a PCM one) we send those too. The device is free to ignore the MP3 one and choose which is better.

In your case (sorry for the long introduction), the scenario of ATTRACTION is totally controlled by the device. For some reason any your device high fidelity audio prefer MP3 when it finds the element MP3 RES. This seems to be a problem with the unit. What is more, the MP3 RES element is coming in the beyond the 4th position in the RES elements list, so it's curious how your device is so deep, without taking into account all the PCM/WAV RES found items before.

In the scenario of Play, we are in control, and as I said above, we send default MP3. If the unit is not "smart" enough to choose something else, you get the experience you get.

To work around the problem, you must modify a registry key (I would like to make a back-up or something because I do not know if it will have side effects). However, this will - remove completely the capacity of your WIn7 machine to transcode to MP3. Here's what you need to do:

-In a command prompt or in the your Start menu search box, type regedit. By doing that you get in the Windows registry

-navigate through the tree to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Media Player NSS\3.0\Transcode

-remove the MP3 entry.

-Restart your machine and give it another chance to your scenario.

These steps removes the function of transcoding MP3 Win7 DMS. Unless you put the keys back, your machine won't transcode to MP3 again. If your device now prefers WMA (cause transcode us WAV to WMA also), do the same for the WMA key. I hope this will help you. Let me know if it does not work. It worked on my side...

Thanks a lot again for your comments.

CCazang@MSFT

Engineer Play/UPnP

Flashing of the program windows with the message "not responding".

I'm running Windows 7 Enterprise and have experienced a problem with the flashing/flickering program windows since the installation of the program. It tends to happen more, when some programs take up a lot of memory, be several excellent windows, photo editing with GIMP 2.0 program or several tab navigation in internet. The flicker can be short, but it arrived to keep it constantly. I don't know exactly, what induces it. It might have something to do with the mouse hovering over the taskbar, as the flickering tends to start when a new window will be selected. A form any of it also occurs when you type in a cell in MS Excel: I start to type in the window of a single program and finish the word in another.
There are two options in the forums. One more course includes the passage off Windows Desktop Manager service. I tried and it seems to work. However, windows aero is off then.
The other includes mingle with the registers in accordance with the following statement: http://www.webtlk.com/2009/06/02/how-to-fix-screen-flash-in-windows-7/. What I've avoided trying because the computer is not mine.

So, what is the solution? This flickering is not only a cosmetic problem. In one occasion, he can freeze a program and a lot of time and also some work may be lost.

Hi Lauri

Sorry for the delay. :(

You mentioned 1.5 GB of RAM, even if it is higher than the minimum requirement of 1 GB, it is weak to implement features like the Aero interface. Aero is very graphic intensive and can consume a lot of memory.

16% of free RAM is an ambiguous number. Although you have 1.5 GB, you don't have that much physical memory available. You can check this by using resource monitor.

Press the Windows Logo + R.

In the Run dialog box, type resource.exe, and then press OK.

Select the memory tab. A nice GUI appears in the physical memory section.

An important point is the reserved physical memory. It's the memory that the computer BIOS material reserves for some hardware on the system (the installed graphics device usually consumes the biggest part). This amount of physical memory is not available for use by the system. If deduct you the number of installed RAM and then rerun your test of memory usage of crete, you will get a true number for 16%.

Tip: you can hover over any element in the physical memory section and a description of the pop-up window for this item.

In regards to windows offering a caveat when system resources are low, as I said before, this is what the State does not is all about. When a program is started or the memory is too low for a running program to respond timely is when you see this State does not reply and flashing that you described.

What you can do.

1. increase the memory by installing more physical RAM.

2. check the virtual memory settings. Open the Control Panel/System/Advanced tab control. In the performance section, click on Settings / Advanced tab, make sure that the programs are selected in the processor scheduling section.

In the virtual memory section, click the Edit button. Select the system drive and click System managed size. This will allow Windows allocate virtual memory if necessary.

3. open the Control Panel control/troubleshooting. In the system and security section, click check for performance issues. Follow the steps in the resolution of the problems.

Make sure you run the Maintenance options as described in.

Optimize Windows 7 for better performance:

http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance at least once a week.

Tell us what you find.

Concerning

Qosmio G50 - can I use infrared to other devices?

Anyone could use before infrared receiver for other devices other then the remote control?

I'm doing it recognize my phone and my Polar HRM but so far without success.

What I see in Device Manager is appears as a device "Winbond" but it is also "eHome" of the WMC remote device?

FIR (Fast Infrared) is rarely more because its very slow, requires line-of-sight and was replaced by BlueTooth.

The G50 has a CIR (consumer IR) port that is not compatible with the devices of TREE. CIR is essentially just used for remote controls.

Then you must either buy a fast USB infrared adapter, or you must use USB or Bluetooth on your device instead.

Consumer ir device does not not on HP laptop and windows that do not open except in safe mode

I had problems since late April and early May. I have a high tower of HP Pavilion dv6. When you try to start, the computer will show the Windows logo then a disappearance back quick page, then to the boot in safe mode prompt. I deleted everything that has been added since April with the exception of ITunes. I did a search of system and found that the infrared device consumer does not work. I read a few posts, but do not seem to be able to try the suggestions around turning off windows system updates since the trouble began. Is my only option the total system restore? How can I get that since nothing came with the computer?

Hello

Thank you for the reply back, I suggest that you contact HP support and answer if the problem is solved and please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

'Consumer IR Devices' does not not and cannot open a session

Hey guys. I just bought a HP with windows 7 64 bit. I'm going to turn on and everything is ready a problem! my screen is all pixelated and when I go to open a session on my screen goes black and I have to force disable it. I booted up in safe mode and I went into Device Manager and saw that "consumer infrared devices" was a problem. I turned off and rebooted but still the same problem. I tried to update the driver, but still the same problem. can anyone understand this?

Hi UglyCustomer.

1. what HP model do you have?

2 you have recently purchased the system, you have updated all the controllers? Any firmware?

3 it seems you have a problem with infrared electromagnetic or CIR. He's probably the drivers.

Thus, the best option will be to go to this site web http://welcome.hp.com/country/uk/en/support.html

Type your model number and update all the drivers. Chipset Audio 2 1 3 Graphics 4 CIR.

Good luck :)

Span1shUk

Device infrared consumer

Similar Questions

Maybe you are looking for