Drivers/control of wired connection

Similar Questions

• Dial-up connections - turn off WiFi on Wired connect with docking station

  Question: Do auto switch without Wired WiFi user interaction and back at Wired.
  Example - user leaves office/docking station with LAN wired to a meeting on WiFi then returned to their office/dock. Laptop can hit "sleep mode" on these steps as well.

  I am mobile Dell to Lenovo and new to AC - so far unsuccessfully disable WiFi on Wired connect. It is a breeze with Intel PROset + "adapter switching" and can be done manually with the Wifi of Dell drivers ('disable on Wired connect'). I assumed that Thinkvantage Access Conentions would be actually more robust than these. Should we simply use PROset even if it is not supplied with systems or is available for download for Lenovo T-Series? PROset method - http://www.intel.com/support/wireless/wlan/sb/CS-028815.htm

  Work to achieve this goal as a policy managed for multiple computers. AC is superb, but wish it had this parameter as Intel PROset.

  Link to photo

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Hi Tpad - rex, welcome to the forums,

  Please take a look in the settings of the profile in the dial-up connections. (Select the profile and choose Edit profile). In the profile, you must have two maps showing; LAN and WLAN, make sure that the LAN exceed the WLAN in the priority list. I'm guessing you got it the other way around, you may set up there in a WLAN connection first?

• Compaq Presario 5400US - need network drivers for XP Home Edition. Wired connection.

  It woun't connect to internet using a good modem and cable (other PC connect successfully using this same equipment). When I type IPCONFIG, I get 2 results, one for Local Area Connection2 for LAC3. Two of them have 169.254.xxx.xxx IP addresses. Both Suffixes DNS blank and empty default gateways.

  When I go into network connections, the LAC2 says "Limited or no connectivity", but it lists a Linksys LNE 100TX Fast Ethernet Adapter. Linksys? I don't have any Linksys product. LAC3 says 'Connected' with the help of a WAN network driver. However, in the Notification area network connections has the same yellow triangle as LAC2. When I right click the icon in the Notification area and select "Repair" I always get the following ".." following action cannot be completed: renewing your IP address.

  If I right click LAC3 (the one that says 'Connected'), click Properties, click TCP. IP and select Properties, it is set to get an IP address and an address of DNS server automatically. It is also the same for LAC2.

  Client DHCP, DNS Client and call the CPP are started.

  I tried ipconfig/release, ipconfig/registerdns, ipconfig/flushdns, netsh winsock reset. When I run it ipconfig / renew I get messages (after he is sitting there for 2 minutes)
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...
  An error occurred during renewal of the Local 2 network connection interface: unable to contact your DHCP server. Request timed out...

  A run chkdsk /r have run the command netsh int ip reset reset.log.

  So, I went 2 network cards, restarted in the device and removed Manager and let Windows reinstall. Windows creates a new connection to the Local network (LAC4, 2 and 3 are gone). It only reads limited connectivity or none and is using Linksys LNE 100TX Fast Ethernet Adapter, like the previous LAC2. The previous LAC3, who uses the network never got WAN driver reinstalled. I don't understand.

  Since an adapter Linksys on a wired connection seemed odd I have tried to find what should be the correct network driver.

  I google "Compaq Presario 5400US" "driver ethernet" OR "network driver" and was taken to a page of drivers HP, which I think makes sense since HP now owns Compaq
  http://h10025.www1.HP.com/ewfrf/wc/s...UCT=93284#n430
  This page has nothing listed for network or chipset cards.  This, of course, has no meaning for me.

  Can anyone help?

  Select this version from the drop-down list on the link that I posted above.

  Depending on the size of file, it does not resemble an auto install file. Accept the agreement and unzip the file into a folder.

  So, download it to a folder and go to Device Manager.

  Click the network card in need of drivers, and then select manual search for drivers. Navigate to the folder where you extracted the drivers and the driver should install.

• Static IP address for printer with a wired connection

  My printer (HP7210) is wired connected to my WRT54GL router. 2 computers also have a wired connection, my laptop is connected wireless. All of these computers use the connected printer. 2 computers can only use a static IP address for the printer. How can I set a static IP in my router?

  I don't think that the WRT54GL supports static IP with the stock Linksys firmware.

  The solution is to assign the static IP address to the printer. Most of the printers on network supports the definition of a static IP address manually. The key is to set the static IP address on the printer out of the range the WRT54GL uses for its DHCP server. Sign in to the administration page of your router and see what addresses the range of IP addresses he uses to hand over the IP address of the client. Usually, Linksys likes to start xxx.xxx.xxx.100 and have leases of 50 to 100 a cancelled so to avoid conflict, you can use any IP in the range of xxx.xxx.xxx.002 through xxx.xxx.xxx.099, or through xxx.xxx.xxx.254 xxx.xxx.xxx.201. After configuring the IP static on the printer, you may need to reconfigure all the print drivers that are already installed on client computers so that they can connect to the new static IP address to the printer.

  See the user guide page 140 to learn how to manually change the IP of the HP 7210 printer settings.

  For example try using the next/IP subnet mask if your router is configured to use 192.168.1.100 to its DHCP server setting:

  Use the IP address of: 192.168.1.202

  Use the subnet mask: 255.255.255.0

  Use the gateway: 192.168.1.1

  To change the IP of the control panel settings

  1. press Setup.

  2. press 8and then press 3.

  This selects the Network Configuration , and then IP settingsmenu.

  3. press on until Manual appears, then press OK.

  4. change the IP address, and then press OK.

  5. change the subnet maskand then press OK.

  6. change the default gatewayand then press OK.

• PC HP Pavilion 15 15-p001tx: control wifi wireless connectivity issues

  Hello
  Member of the Community/Forum
  
  Model name - laptop Hp Pavilion 15 (15-p001TX)
  Questions - Brodcomm 802.11n wireless adapter not Worming.
  
  Problems-
  I was faced with the same problem for 4 days and I tried all possible means to resolve out, but nothing works.
  
  Problems are the following:-

  1) Wifi stopped working 15 minutes to restart the computer and the wifi icon is automatically limited, and then it automatically become the LAN (small PC icon) and after this phone get hanged every time.
  
  to re work I need for wtich forcefully from the power button.
  
  2) I followed all the tips and tricks to solve the problem and even take a Hp support helps solve this problem of wifi. but nothing works... no one has helped me on this problem.
  
  Here are the ways I've tried.
  
  1. that tick managent of power, I have UN ticked (from PROPERTIES)
  
  2. using the CMD, I reset
  
  3. I DID cofig automatic Wlan disable (and put it on startup)
  
  4. update the drivers to the latest Version.
  
  5 install the latest drivers from the HP website brodcomm or even other Web sites.
  
  No the above to help me out.
  
  3) all wired network work great, but when I swtich to wifi, it will automatically limited and then diirectly hang the entire notebook.
  
  Please please suggest the Suggestion and the ways out sorting valueable.
  
  He's really frustrated now, I do not understand what are the ways to my wifi on working condition.
  
  Thank you
  
  Kind regards

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  Aditya Rai

  Aditya Rai

  Hello @adityarai82,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!  I understand that you have tried the troubleshooting steps a lot already, without success.

  Try to review these steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.
  
  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source: fixes Common for wireless connectivity problems.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Wired connection is not displayed in Cisco Connect

  Hello Cisco Home Community Forum,

  All my wireless to my Jack connections are fine and appear in Parental controls in the Cisco Connect software. But my wired connections are not. Each device that connects via an ethernet cable plugged into one of the ports on the router are not included in the Cisco Connect Section of parental controls software. Please tell me how to solve this problem. Or are parent to wireless only controls?

  Thank you for the help

  He won't see the square automatically.list. If the computer is not listed, click Add to select the computer. You can also check the connected devices under the DHCP Client table on the router configuration page.

• I keep getting error 651 trying to make a wired connection

  original title: I keep getting error 651

  I keep getting error 651.

  I replaced the system of rasPPPeO several times with a workgroup file in Vista and still no connection. After the file system is replaced, I get a new icon in a wide area network wan miniport for Device Manager. When this driver is searched, windows gives me an error of installation. Its a out of the box motherboard, all the drivers are up to date. However, no link. I am connected via the wireless, but I need a wired connection. How can I solve this frustrating problem?

  You have posted in forum Windows 7, saying: you have replaced a file system with that of Vista.  That sounds like it's likely your problem.  You don't have anyway normally just replace system files.  You install the drivers. I suggest that undo you what you've done for system files and get the correct driver for your NETWORK card installed.

  Good luck.

• Color LaserJet Pro M277c6 MFP: MFP M277c6 unable to connect with a wired connection

  Just bought and installed M277c6.  It connects and can communicate via USB and wireless networks.  However it does not work via the WIRED ethernet connection, I need to get this printer works on the WIRED network.

  That's what I see...

  Power on the M277c6 and I see the link on the router port light will blink twice.  However after that the M277c6 has finished loading, the link light goes out and when I print the summary of network - the printer think that the "cable is not connected", but it is connected.

  I tried the following:

  1 tried 3 different network CAT 5 cables (I checked all 3 cables work as I can use them with my office to get on the internet)

  2 tried 4 different ports ethernet on the router (I checked that all router 4 ports work as I can use them with my office to get on the internet)

  3 restarted the router, printer and computer several times

  I also installed the latest firmware from the HP for the M277c6 site and have the latest version of the software on my computer to Win7 64-bit.

  Question:

  1. how to activate the WIRED port that is enabled on the M277c6?

  2. How can I get M277c6 to communicate via ethernet WIRED?

  Appreciate pointers and help...  I also tried to work with HP CAT and both times they took control at distance of my deskop, but have been unable to solve the problems.  Unfortunately, they have disconnected cat, whenever I asked how to get the work of WIRED connection as they both wanted to ONLY get my wireless to work.

  Thank you!

  First thing to try is to reset back to factory defaults. In no joy, I suspect that the Ethernet port is defective in the printer.

• How can I go back to a wired connection to the internet on my laptop?

  I added a wireless router to my modem earlier this year and have used my wireless laptop since then. Now, I have been informed that something I do would work faster if I was using a wired connection, but I can't seem to connect again. What should I do to keep both types of connections, and to be able to switch between the two, when necessary?

  Disable the wireless network adapter...

  Go to control panel > large icon view > network and sharing Center > change adapter settings > disable the wireless adapter...

  If I put in place a backup of any kind that had taken two days already, I think that something was wrong and réévaluerais what I was doing... :-)

• Wired connection slows down when plugged into the laptop

  Hello

  I have a wired connection to my laptop and you have a problem a week that my internet is slow. So I called my ISP and told them on this subject. My ISP says my connection is under FUP (Fair Use Policy - down internet speed when you reach the maximum bandwidth provided by your ISP in the months. - ONLY in the PHILIPPINES that is really annoying and disturbing) anyway, so I tried to stop using my wired connection to date and use the Wi - Fi connection. It went well, I have a fast connection again. And then I tried to connect again to a wired connection that is different from my own wired connection, it is connected to a PC and have a good connection speed. So I connect it to my laptop and expect that it has good connection to check if there are updates in my system. Surprisingly, the internet connection on my laptop was really very slow. I tried to check internet speed using Speedtest and 0.17 to 0.20 Mbps operation. So I removed again and again on the PC. When I checked the speed of connection on the PC, it gives me more than 3 Mbps.

  That's what I've done so far:

  Update drivers / windows

  Active mac address / changed

  Frushed DNS

  and finally tried to reformat and it seems not working do not and have the same problem.

  I have LENOVO IdeaPad S400 Touch with Windows 8 on it.

  What seems to be the problem?

  Thank you!

  Hi Raymel,

  Yes, it's maybe a problem with the network card. I suggest you to contact the manufacturer of the laptop to get help on this issue.

  Please let us know if you have more queries on Windows.

• Re: Satellite P50-A14G - unable to connect to the internet using a wired connection

  On my laptop, Satellite P50-A14-G, I can't connect to internet via wired connections.

  WiFi does not work properly, but not the Ethernet card. It has not any light when I connect the wire, and I realized that on the Panel of the map icon does not appear.
  My OS is Windows 8.1 update 1.

  Hello

  Have you checked status LAN card in Device Manager?
  Please make sure you that network card installed, listed and active properly.

• Wired connection without love at first sight?

  I need to update the software for my router at home. (The router were made by Netgear).

  At the beginning of the instructions, it says this: "to avoid the problem of disconnection during the process of the firmware download wireless, NETGEAR recommends this firmware update be performed on a computer with wired connection.

  I don't know how to connect my Macbook Air to the modem with a cable, since it seems that there is no port for this.

  It seems that I might be able to buy a "Thunderbolt" adapter for $29, but that seems like a piece of expensive hardware because I need only to update this software. For $29, I could virtually buy a new router.

  Two questions:

  1. is there a cheaper way to connect my Macbook Air to the internet with a cable?

  2. can I download updated the firmware of the Netgear via the normal WiFi connection, or he'll just permanently disconnect my laptop on my home WiFi network?

  Thank you for any advice you can give me.

  Two questions:

  1. is there a cheaper way to connect my Macbook Air to the internet with a cable?

  2. can I download updated the firmware of the Netgear via the normal WiFi connection, or he'll just permanently disconnect my laptop on my home WiFi network?

  (1) No, you need to this thunderbolt adapter and an ethernet cable.

  (2) what they give is the perfect Board as ethernet is more reliable than wifi. But I am not agree.  Maybe I have will burn someday, but chances are with me.  99% + chance you can do wireless.  You are offline but can reconnect automatically in most cases and may have to do a manual connect after installs the firmware.

• Wired connection

  I just bought the Sony BDP-S370 and I tried to connect using a wired connection. I put my settings in and nothing I also did with 'AUTO' settings and nothing. I called Sony and they could not help I called comcast and none help so am hoping that some on hear can help.

  Hello 951253, the user
  Congratulations on the purchase of your new Blu Ray player. Apologies, you experience network problems. Auto is fine for Setup, but when you need solving problems, you must look at all the parties involved. Check first is the layers of the devices.

  Comcast Modem > router > wired connection to the player.
  or
  Comcast Modem/Router > wired connection to the player

  If you can connect directly to the modem try this first
  (not all modems will allow this)
  Once you have determined which device is blocking access, check your IP address.

  You can find the network settings of > networking > Internet status > and if your ip address is valid as 192.168.x.xx then the router is good, but no communication to the Modem.

  If you have an IP address under network settings of 169.xx.xx.xx then this is a universal car fake address created with no connectivity. and it could be your cable or other issues.

  Sorry to provide general answers but with network troubleshooting, unless it is a specific Question, its best to work with us on-line.

  Contact us at your convenience
  http://eSupport.Sony.com/us/Perl/select... RC = CONTACT

  Best regards
  Kimberly

• Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

  Hello

  So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

  I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

  It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

  Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

  Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

  Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

  Hope it is something simple and anyone can help you.

  Thank you

  Steve

  Following this request and reading the many more similar questions, I think I may have solved this.

  I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

  I tried the following in the past two days...

  (1) completely don't reset my router (wiped all settings and started)-no luck!

  (2) I tried changing to WPA2 to just WPA security - no luck!

  (3) tried to convey the Hello to the printer ports - no luck!

  (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

  Finally, what seems to have made (at least for now) has been...

  (1) disconnected the Officejet ethernet and set up as wireless.

  (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

  (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

  By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

  Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

• What are the drivers, I need to connect to the internet for a GT5432 of operating Windows XP and not Vista?

  I asked before, but try to reformulate my question. In my opinion, it miss a driver I need or have bad installed. (of the re - install after a storm)

  Charter, my I, said that there is a problem with my drivers or the Ethernet connection. I installed a new Ethernet connection-SMC1244TX. Still no connection.  I called SMC customer support number - they me Charter connected - which gave me the number to the catwalk, who want to $99-149 to ask a question because it is not under warranty, because someone changed the Vista to Windows XP, I thought I found the download for the correct drivers, but when I put my flash drive on GT5432 - I was not able to get the files-now I can't locate the download again.

  So what are the real drivers that I need on the GT 5432 operating Windows XP so you can connect to the internet?

  I just skimmed the old thread. It's too long. I think you should have stayed there.
  This has probably already been given to you in the old net but that's...
  Go to http://www.smc.com/index.cfm?event=downloads.doSearchCriteria&localeCode=EN_USA&productCategory=9&modelNumber=1537&partNumber=0&downloadType=1&knowsPartNumber=false and download the driver. You will need your card, part number. He also says it's a SMC1244TX-1. Don't know if it's the same thing as what you have.

  I can offer help any more than that. If you need additional help, go to the old thread.