Equium L350 does not start, just sound

Similar Questions

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Satellite 1400-103 does not start (just blinking led DC)

  When I led plugin the AC DC adapter goes orange and starts flashing (code: 3 flashes - pause - 3 flashes flashes - pause - 2) and the laptop does not start.

  I tried several different batteries with no result. Can someone tell me what exactly is the code above?

  Hi Paul,.

  These sequences are used by repair technicians to help diagnose the problem. Unfortunately, there is no generally available documentation describing, so you will have to refer to an authorised Service Agent to get your problem diagnosed or repaired.

  Sorry

• Equium L350 does not load upward

  Hello

  my laptop does not charge upward I can enter in f2 and f12

  I tried to reset it, but in vain.
  I can't access the start on safe mode screen, any help would be appreciated

  p.s fan still work it sounds as if she is trying to load up, but all we get is the black screen.

  >... I cannot go into f2 and f12
  This means you can enter start/settings of BIOS and Toshiba welcome screen menu?

  You can enter boot options using F8 at startup?
  >... all we get is the black screen
  Black screen with cursor flashing in the top left?

• Equium L40 does not start

  I was working on my Equium L40 when it has just been cut. I had worked on it for a while so it was very hot and the fan worked very hard!

  I checked the power supply and it is fine. I'm guessing (but not sure) that this is a motherboard failure and that will cost more than a new laptop (this one is 3 years old). Could it be the battery?

  The problem is that I have a job that I need to get. My co-worker said I should just remove the hard drive and get a 'cradle' that will allow I plug the drive into my new laptop using a USB key and retrieve the information. Is this correct?

  Any help would be welcome!

  Duncan

  I put t know for sure, but the problem may be overheating. Leave it for a while and try to restart your laptop. If the laptop restarts correctly to the first back up all your important data.

  Next step should be the laptop clean. Probably cools grill full of dust and laptop cannot be properly cooled.

  Yes, your friend is right. You can connect the HARD drive to the other PC as external device and you will have full access to your data.

• I have a Pavilion a6244n desktop computer. It does not, start just beeps long short 2 and 1. Beep codes HP

  identify the video card. He has a card of Nvidia GeForce 8300GS. Because I can not start the computer, can I safely replace the card with a GeForce 520 and will recognize it and start the computer? It is almost 5 years and I have already replaced the power supply. The computer worked very well all these years and think it can last from several others. Any suggestions? And thank you for taking the time to read this.

  I replaced the video card. New card is a GeForce GT 520 Galaxy. Everything is back to normal.

  Thanks for your advice.

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L350 does not start

  I have a satellite L350 who will not complete the boot process. When I turn on the camera, it will get to the screen that says windows, with the Green scroll bar and that's it. Then my screen turns off.
  When I try safe mode, I get a blue screen with an error message. I went into the bios and change the boot sequence to try to run my recovery disk. When you do this I just get the same black screen.

  Any help would be greatly appreciated

  Hello

  This means that you are not able to reinstall the OS using any disk (disk recovery, Windows XP, Vista or Win 7)?
  The BSOD may be a hardware problem or serious software product, but it looks more like the hardware issue if you're not able to reinstall new OS.

  In this case, the RAM (memory sticks) and the HARD drive must be verified.
  I recommend you to try new memory modules. The HARD drive can be checked by using a tool called Drive Fitness Test which can be downloaded for free from some pages.

  If you don t have right spare modules so I advise to ask a local technician laptop help guys should put new, the work packages and test the laptop.

  Your warranty is valid?
  If so, get in touch with ASP from Toshiba, that might help.

• Equium A60 does not start after the BIOS update

  I have an Equium A60. After being caught with some very nasty malware and Trojan horse, I had the disiccion to reformat the machine and reinstall the OS.

  Everything goes well until I updated the bios. Machine crashed and now I can't restart. Press the power button and the machine will start for 3-4 seconds and then stops.

  I know it of because of the bios and want to know if there is anything that I can reset this back to the original settings?

  Thanks in advance for your help

  Hello

  Unfortunately, you can not solve a BIOS is broken down by yourself. At the machine really / judgment of accident during the update process? If Yes, then your machine has disappeared and the only chance to bring back to life is to ask an authorized service partner to help you.
  Maybe they have a software to solve these problems. You should try and contact the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck

• Equium A60 does not start correctly

  Hey,.
  I was working on my laptop and it froze, so I restarted, but it froze again.
  When it restarts again the laptop attempted a System Check, but to try to initialize steps 3 > (newspaper?) it happened extremely slow so I restarted it.

  This time, the laptop not boot but produces a blank screen showing:
  "For (x) Realtek RTL8139 810 x PCI Fast Ethernet Controller v 2.13 /8130/ (020326) PXE - E61 Media Test fails, check the cables." PXE-MOF-leave PXE ROM.

  However, when I am sometimes inclined to my laptop, it starts, but slowly?
  I test the University, but I don't understand what to do; I took it to our technicians, and they don't know what to do. Can anyone help please?

  Hello Joseph

  I assume that the HARD drive is at the end of his life. Like written Marina trying to check if you have access to the HARD drive otherwise, I think you need to buy new HARD drive.

  Please let us know if you will find what is the problem.

• My computer (xp) does not start, just keep trying to start and recycle. Does not start in the chest or any other mode.

  Tried the recovery disc, and he said he couldn't fix it, but I don't know if I'm doing things.
  I tried the xp disc and run Setup, after that he installed something that he said that he could not find a hard drive of the computer

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  Restore the previous settings, repair facilities, and retrieve data.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• I reinstalled acrobat and now it does not start, just breath down and goes?

  I am unable to get acrobat to start successfully.  I don't get any messages. using Wi7/32 bit sp1

  reset your preferences:

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: https://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light file-Preferences-room

  Photoshop: https://forums.adobe.com/thread/375776

• Equium A300D will not start.

  My Equium A300D does not start. It just displays 'the file is possibly corrupt. The file header checksum does not match the checksum calculated. Why? What can I do? I have only a few months.

  Have you installed lately new RAM? Its important to the RAM test before use. Or the standard RAM is possibly defective.

  Go to www.memtest.org and run Memtest for a few passes (it is a bootable CD).

  The file system may be damaged, try running CHKDSK from the Recovery Console. http://support.Microsoft.com/kb/314058

  The HARD drive could be faulty, Hitachi DFT is a good HARD drive tester. Run the test advanced to search for bad sectors.

• Dv6-3032-TX does not start

  Bought this laptop 13 months ago, right, guaranteed pass 1 month, I rarely use, especially for the last 4.5 months, didn't even turn on and today I discovered, that it does not start, just windows 7 welcome page hanging.

  "I used F11 to recover, it gives me two options," launch Startup Repair "and"start windows normally", when I choose the first, then it says"cannot start windows, a recent change of goods or software hard could be the cause,"windows installation disc 1 insert... 2. choose the language... 3 click on repair your computer '. '. I put in a disc of windows 7 at retail, it will load the files, but cannot access the blue page where you select options.

  I then use F2 to make appear the HP system diagnostics and he did several tests, and when he checks the hard drive, it says failed.

  My question is what I should order a HP recovery disk and try to recover from the disk that I didn't or burn the disc myself. Or it certainly is a hard drive failure, then do I always contact HP to buy a hard drive that contains windows 7 image or simply buy a hard drive also and install a windows disc 7 retail. I want to just keep to a minimum the cost because I do not know if same thing will happen again. Thank you!!!

  This widget could not be displayed.

• Equium M50-192 does not start

  Hello
  I posted a question here earlier on my laptop and I had useful assistance but he juices do not appear to have sorted.
  but I have now no wat it is not and just don't need to know wat it is

  I have a toshiba m50-192
  and when I turn it on it does not start going to a black screen and gives me errors (pxe - e61)

  in my last question, I was told that it was the hard drive was dead.
  Since then, I've replaced my hard drive and my hard drive, but it always seems to be doing almost the same

  I can get into my bios and the hard drive is recognized.
  I tried to boot from the disk recovery and hard drive but no joy.

  but since I replaced both drives when I boot from the hard drive it gos just a black screen with the little line in the upper right corner.

  but when I boot from the disk it gives me this error pxe - e61, which is where his tent to boot from the network I have read.

  until I replaced my hard drive, he had a strong look that has disappeared since I replaced it.
  the disk hard im trying to use now is off my brother's mobile which all ready installed xp on it it would make a difference when you try to boot from the hard drive? (my laptop is xp)

  I read something on definition of my hard drive to the master and my cd player to the slave that would make a difference and how would I do?

  I think it's as much information im aware off

  could someone please help as im stuck and did not have any idea what to do

  Post edited by: domio
  o im also getting the and pxe - e61 pxe - m0f error code

  Hello!

  What happens to an error you get? Please post what we can help you.

  To be honest that I n don't know what you mean with clip Ribbon keyboard but if the keyboard is faulty or something else, the keyboard completely must be exchanged. You are not a unique key or something else.
  If you want a new keyboard or other spare parts contact your local ASP.

  Good bye