Fornuis vCenter 5.5.0U2b - 6.0U1

Similar Questions

• How to upgrade vCenter 4.0 to 4.0u1

  I have three ESX hosts on vSphere 4.0 and vCenter 4.0 running so

  I manually update vSphere Client 4.0 to 4.0u1 do manual installation procedures (setup.exe)

  I run the update on vSphereClient Manager apply updates to my guests. Thus, the hosts work 4.0u1 so.

  But how do I update my vCenter 4.0 to 4.0u1? Do I have to take the 208167 package and start the installation?

  Run the installer and make sure you select 'existing DB.

  Also update the VUM server and converter part.

  André

• Online upgrade to VCenter 4.1 update 4.0u1

  Hi all

  I am about to the VCenter 4.0u1 only in 4.1 update on my vsphere infrastructure, the rest of the ESXi can stay in 4.0u1 since there is no performance / big improvement at all.

  I am running:

  Windows Server 2003 Standard R2 SP2 x 64

  SQL Server 2008 SP1 Standard x 64

  should I pay attention before the upgrade online of the 4.0u1 for VCenter in 4.1 in the production environment?

  any kind of help would be greatly appreciated.

  Thanks in advance.

  Kind regards

  AWT

  It is a fairly straightforward improvement.  You need however is a 64-bit SQL Native Client.  Additionally, make sure that you back up your DB.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_upgrade_guide.PDF

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=c6c3e9ef-BA29-4a43-8D69-a2bed18fe73c&displaylang=en

• Upgrading vCenter 4.0 32-bit to 64-bit vCenter 4.1

  Everyone...

  Upgrading vCenter vCenter 4.1 to 4.0u1. The current server running vCenter 4.0 u1 is just a Windows 2003 based VM.

  Databases supporting vCenter and Update Manager is installed on a physical Server SP3 to SQL 2005 64-bit.

  I want to plan and to implement the upgrade as follows:

  Remove the current vCenter domain and turned off.

  Turn on a new virtual machine running Windows 2008 64 bit and rename it as the old server vCenter.

  Add the new vCenter server to the domain

  Installing vCenter 4.1 on the new vCenter server and use the existing databases that support

  the old server vCenter.

  Use the Update Manager to upgrade vSphere 4.1 on each managed host computers.

  What possible questions could meet or must be aware, as I implement this

  upgrade process?

  During the installation process and it asks to use an existing database, will be installing

  just updated the database to process and store the configuration data of the server vCenter 4.0?

  Once the upgrade is complete for the new vCenter server.  I see the same configuration

  as I saw in the old server vCenter configuration?

  Looking forward to all the world the answers... Thanks in advance!

  I agree with Redbaron51.  I used the setting level guide and things worked perfectly.  There is a batch file that backs up the database and converts it to the new 64-bit server.  It was very easy and worked as advertised.

  Mike P

  MCSE, VCP3/4

• SAN health service virtual VMWare

  Hello

  Any who stumbled upon this question. We are in the process of updating the vcenter 6.0 to 6.0U1. During the upgrade Setup attempted to stop vsan-health service that didn't exist, and the upgrade has been abandoned. I try to install the plugin from vsan, the installation was successful, but the windows service has not been registered. Here is the log of errors and hope that someone can help me to resume the service.

  '"D:\Program Files\VMware\vCenter Server\vpxd\scripts" ' is not recognized as internal or external, command an executable program or batch file. "= VMWare Virtual SAN Health Service installed = '.

  Thanks in advance

  Found fixed the name of the VMWARE_PYTHON_BIN variable doesn't have the full path to: \Program Files\VMware\vCenter Server\python\python.exe

• Fallo en vCenter fornuis after connection a vCenter 5.1

  Hola a todos,

  I have a problema as mirar bastante aun despues no he present find the respond. Vamos a migrar las granjas production version 4.1 has the 5.1 y para ello empiezo por fornuis una pequeña granja as the tests tenemos con back 4.1 ESX host con 4 maquinas office y UN vCenter. Para fornuis utilizo ISO VMware-VIMSetup-all - 5.1.0 - 1235309.

  El vCenter are a Windows Server 2003 64-bit are para las bases of datos del vCenter, Update Manager y el SSO utilizo UN SQL Server 2005. Toda the instalacion is one sin problemas y in el orden previsto, el primero con SSO su base data "Aside" in el followed del inventory service, SQL Server y el vCenter including todos los have that need. Por ultimo, el WebClient. TODO wont in el mismo servidor. The Red than no hay en don't firewall y el DNS works correctamente directa e inversamente.

  Y cuando quiero access al vCenter me don't dice that no permissions as el usuario o tengo y contrasena no son correctos. Accedo SSO al Entonces con el web client con el usuario por defecto admin@System-Domain y accedo sin problemas. Y lo than veo el vCenter are no registered in el inventario del SSO appears. El identity source esta correcto identificando el dominio y los drivers of dominio y prueba of conexion works correctamente. Veo muchos users del dominio appears in the part of SSO users are groups in las pestanas locked y disabled al mismo tiempo than no dice no are blocked or or deshabilitados.

  Leo UN KB of VMware than as this can be a los grupos claims of dominio grupos dentro anidacion problema local del servidor y the respond're poner los local con los local y dominio los con dominio, pero no lo entiendo well o o los no veo donde y como hacer esa asociacion. Tampoco veo como add users of dominio especificando el dominio is that al add users no hay campos para ello como're if all were local al SSO server.

  In este KB menciona el message than obtengo al instalar el vCenter:

  Unable to connect to VMware vCenter Server after upgrading to vCenter Server 5.1 (2035758)

  In the database of the server vCenter, users, or groups have been found who have administrator privileges and are also recognized by vCenter Single Sign On. These users are listed in the vc_admin_users_groups.txt file in the system temp folder. Use these users or groups to connect to vCenter Server.

  Pero no tengo el fichero en ruta indicada mentioned text nor is you can apply the proposal are Québec como he mentioned identity source works correctamente el respond...

  El principal problema claro think that're el vCenter no appears in el inventario SSO del pero no averiguar can not the causa of Quebec no aparezca or can not find a respond al problema. ¿Alguna sugerencia o idea?

  MUCHAS gracias to photos,.

  Kind regards

  
  

  Hola a todos,

  Bueno, me respondo a mi mismo. He fixed the problem, Québec tampoco era realmente is a problem in himself. No se if the respond are the perfecta o If only hay algo than still me pierdo pero el caso are lo I have running.

  Mirar Vmware documentation mucho Despues y th of pages web, articles y foros donde ninguno daba una respond concreta y or even information sober el del SSO behavior y el vCenter, between back informaciones encontradas en sites different he terminado por Hilaire una respond back.

  Por a lado, is dice that to access SSO administrator como al y poder configurar certain things hay than logarse con el usuario del sistema admin@System-Domain con el than efectivamente is you can access pero sin embargo no muestra el vCenter registered por el sencillo reason that no permissions tiene para ello y tampoco el add users works local desde alli. También el al SSO con entering connection works a dominio, pero tampoco en el vCenter permissions tienen como usuario stink tampoco lo muestra.

  Al final en otra web what height the "pista" that users local del servidor windows than aloja el servicio del vCenter tienen acceso permissions, pero ojo, no valen users o grupos anidados grupos dentro local porque el SSO solo without los reconoce correctamente a permissions level. Moraleja todo esto, el unico con al usuario vCenter despues del upgrade permissions are el usuario local administrator of the Máquina del vCenter.

  ASI pues, he could logarme sin problemas in vCenter el con este usuario y dar permits al Administradores del dominio in vCenter con el grupo el rol administrator there starting from este momento is he could enter sin problemas con mi dominio usuario. Lo mismo serviria if we want to include otros grupos o its users.

  I hope os sirva if os encontrais con el mismo problema.

  Kind regards

• spend 5.0u1 + RS 5.0.2 to vCenter vCenter 5. 1 b + SRM 5.1.0.1 really not possible?

  Hello

  I vSphere business with vCenter SRM 5.0.2 on two sites (SRM for two protected volumes and two recovery volumes on NetApp file on every site server) and 5.0u1 and I guess its time for the 5.1 branch. But in the documentation for the MRS it is explicitly stated that MRS. upgrade to 5.0.2 5.1 is not possible. Is this really true? This means that I need

  d ' being stuck to 5.0 versions forever?

  -to completely uninstall RS, remove from its database, install 5.1.0.1 and create 5.1 SRM and set it up from scratch on each site?

  Or should I just wait for the next version of SRM 5.1 (5.1.0.2?) - if so, when it comes out?

  Thank you

  David

  Hi David.

  SRM 5.0.2 was released after 5.1, there is no built-in 5.1 code that knows the way to upgrade to 5.0.2.

  Good news, it is that there should be a 5.1.1 new releases in the next 24 hours that will have this ability... so your upgrade path is now directly from 5.0.2 to 5.1.1.

  You will probably spend a lot more time on the upgrade to vCenter with every new bit it to with SRM upgrade - it's pretty simple.

  Hope that it took you time before you rebuilt.

• After the upgrade to VMWare vcenter 4.0u1 VUM is now error?

  Hello

  I'm having problem to access my new

  vCenter, the normal functioning of the ESXiu1 works fine in vcenter 4.0u1

  except that I get this error:

  *There was an error connecting to VMware vCenter Update Manager vCenter01.domain.com:8084 Database temporarily unavailable
  
  XXX com.vmware.vcIntegrity.SigUpdateTask.label not found XXX
  vCenter01.domain.com
  Queued
  VMware vCenter Update Manager Update Download*

  what I've done previously is that I

  manual migration of the x 86 in SQL Server SQL Server 2005 database

  2008 x 64.

  can anyone explain why this could happen?

  Kind regards

  AWT

  It is not really something of great value in AUVs to database, except the basic lines, which can be easily recreated so you are probably better if you uninstall / reinstall vum and re-init the db.

• vCenter 4.0 4.0u1 update

  We will be testing view 4.0, so I have to make sure I cover all bases; 1 update is required to see 4.0. I managed to update our servers ESX 4.0 3 to 4.0u1 using the Update Manager.  I also need to update our vCenter server too?  I don't see a way to update the server vCenter without the cd.  When I put in, I don't see any options to do an update. It looks like a clean install.  I stopped when I got to the part of the wizard prompted me to the instance of database because I don't want that screw up.

  To upgrade vCenter, just start the installation (from VC ISO or ZIP).

  Choose the existing DB and this will launch the upgrade procedure.

  Remember to update also VUM, converter and other plugins.

  André

• vCenter 6: research MOB Service repeatedly prompts for credentials

  Hello world

  We have 2 vCenters Windows based in our environment, with the following windows + vCenter configuration of version:

  Windows Server 2008 R2 with vCenter 6.0 Update 1 (Embedded Architecture PSC)

  Windows Server 2012 (not R2) with vCenter 6.0 Update 2 (Embedded Architecture PSC)

  On both of these vCenter, we replaced the machine graduated with a 3rd party CA signed certificates (in the case of the vCenter 6.0U2, this has been done while version 6.0U1.)

  For some reason, trying to apply patches with SSL trust anchors broken documented in VMware KB: vCenter server certificate validation error or a service platform for the VMware Solutions external... controller When you go to the search interface of the MOB service @ https:// < vcenter-FQDN > lookupservice/mob, I'm prompted repeatedly for credentials to connect.  I tried the [email protected] account, but also integrated AD who have administrator SSO access accounts.  In both cases, these identification numbers can connect to the PSC / vCenter, fine, but nothing seems to authenticate with the MOB interface for the search service.

  On the two vCenters as well, if I try to access the web interface of the PSC via https:// < vcenter-FQDN > / PSC, I get an error:

  State HTTP 400 - an error has occurred when sending a request for authentication on the Server Single Sign-On PSC - null

  type of status report

  An error occurred when sending a request for authentication on the Server Single Sign-On PSC - null

  Description the request sent by the client is syntactically incorrect.

  
  

  I am confident that the two symptoms are related, as we have other vCenters based on Windows running 6.0 Update 1 when it is not a problem.  However, I was at a loss to identify the cause to find all the logs that are correlated with the web interface of the PSC errors or failed authentications in the CROWD.

  
  

  Would appreciate advice or guidance on how to solve this problem.  Without being able to connect to the CROWD, we are unable to troubleshoot SSL certificate I described above.  Thank you very much in advance!
  

  I figured out the problem and documented the findings in my blog here: Troubleshooting expired certificates with vSphere PSC 6 | Virtually understood

• VCSA 6.0u1 (updated 6.0 VCSA) vSphere Web Client error

  

  After that I upgraded my VCSA 6.0 to 6.0u1, I can't connect to the Web Client vSphere.

  How upgrade from 5.x and 6.x VCSA to VCSA 6.0 Update 1? virtuallyGhetto

  Clock animation Flash Adobe turn for a few moments, then it gives the error in the attached screenshot. «There is an internal error occurred - Index '0' specified is out of range.» It happens in IE10 and Chrome.

  It is a standalone PSC and I can connect to the device management https:// < vcsa >: 5480 and apparently in good health. Can I deploy a new VCSA from scratch, but it would be nice if I could fix it.

  Any suggestion would be appreciated!

  And if the clearing the cache of the web browser does not solve your problem, try to delete the database of serenity:

  To delete the files in the VMware vSphere Client Web serenity database:

  1. Stop the vSphere WebClient service. For more information, see stopping, starting, or you restart the services of VMware vCenter Server (1003895) and the stop, start, or restart services from VMware vCenter Server 6.0 (2109881).
  2. To delete the files in the database of serenity, type these commands:

     For Windows vCenter Server 5.x:

     Use File Explorer to delete the content of C:\programdata\vmware\vSphere Web Client\SerenityDB\serenity
     For Windows vCenter Server 6.0.x:

     Use File Explorer to delete the content of C:\programdata\vmware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity

     For the VMware vCenter Server Appliance 5.x:

     Type this command when logged in as root with a shell of the console or SSH session:

     rm - rf/etc/vmware-vsphere-client/SerenityDB/serenity / *.

     For the VMware vCenter Server Appliance 6.0.x:

     Type this command when logged in as root with a shell of the console or SSH session:

     rm - rf/storage/vsphere-client/SerenityDB/serenity / *.

  3. Restart the vSphere WebClient service. For more information, see stopping, starting, or you restart the services of VMware vCenter Server (1003895) and the stop, start, or restart services from VMware vCenter Server 6.0 (2109881).

  Source: VMware KB: The VMware vSphere Client Web reports an internal error 1009

• NetApp VSC v6.1 UI is missing from the Web Client v6.0u1

  I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.

  In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.

  I tried the following:

  The re-registration plugin

  -Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity

  -Departure VC web customer service

  -Re-enrollment VSC with VC

  All the re - install

  -Stop services of VC

  -Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)

  -Stop services VSC

  -Do a complete uninstall

  -Remove the VSC installation directory

  -Reboot server VSC to delete reg keys

  -Install the new copy of VSC 6.1

  Re-record with the VC Server

  The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.

  Tear out my hair with it. Any help would be greatly appreciated.

  

  Guys,

  An update on this issue, it could be useful to resolve any other issues similar and research...

  After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:

  "C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.

  The solution was: -.

  • Delete the file
  • Open customer vcentre, administration, plugins
  • Disable a random plugin (this forces the State file recreate)
  • Exit vcentre and then reopen
  • Plugins should now be visible
  • Customer goto plugins and re - turn that which has been previously disabled

  Good luck guys, it was a serious pain in the ass

• vCenter reinstall (new ssl certificate)

  Because an upgrade of our vCenter 6.0 to failed 6.0u1 I had to completely reinstall our environmental VIO2 VC.

  Unfortunately, the self-signed the CV certificates are replaced by new ones. Now, it seems, that the administration VIO server does not trust the VC more:

  /var/log/OMS/OMS.log

  [2015 10-22 T 11: 06:44.754 - 0000] Tomcat-http INFO - 24 | com.vmware.openstack.security.UserAuthenticationFilter: null host vc update

  [2015-10 - 22 T 11: 06:44.755 - 0000] tomcat http INFO - 24: com.vmware.openstack.vc.AuthenticateVcUser: try Moose vc service: https:// VC-URL: 443/sdk

  [2015 10-22 T 11: 06:44.762 - 0000] Tomcat http ERROR - 24 | com.vmware.openstack.security.UserAuthenticationProvider: authentication failure: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: server certificate chain is not approved and the thumbprint does not match

  [2015 10-22 T 11: 06:44.811 - 0000] Tomcat-http INFO - 16 | com.vmware.openstack.security.UserAuthenticationFilter: null host vc update

  [2015-10 - 22 T 11: 06:44.811 - 0000] INFO tomcat-http - 16 | com.vmware.openstack.vc.AuthenticateVcUser: try Moose vc service: https://VC-URL:443 / sdk

  [2015 10-22 T 11: 06:44.813 - 0000] Tomcat http ERROR - 16 | com.vmware.openstack.security.UserAuthenticationProvider: authentication failure: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: server certificate chain is not approved and the thumbprint does not match

  [2015 10-22 T 11: 06:44.834 - 0000] DEBUGGING tomcat-http - 26 | org.springframework.web.filter.CommonsRequestLoggingFilter: before application [uri=/oms/api/connection/status?null;client=10.205.208.3]

  [2015 10-22 T 11: 06:44.836 - 0000] DEBUGGING tomcat-http - 26 | org.springframework.web.filter.CommonsRequestLoggingFilter: after application [uri=/oms/api/connection/status?null;client=10.205.208.3]

  Is it possible to accept the new certificate from the Management Server?

  For cert VC, if it is signed by a different VC CA(I think this is true for your VC), please download the VC CA cert to https://vc_fqdn/certs/download and add in controller nodes and compute nodes /etc/ssl/certs/ca-certificates.crt

• vCenter 6.0 build wrong version.

  I recently upgraded to 5.5 to 6.0U1 and also two fact installs 6.0U1 fees. I used the following media of vmware-

  VMware-VCSA-all - 6.0.0 - 3040890.iso

  SHA hash - 02fae9b2c18eb2127ca9ccc2f8b44d5e715e0834

  All 4 of the vcenters appear as version 3018523 instead of 3040890. Scanner Nessus, who has a vmware plugin says I must upgrade to the latest version of 3040890 because of vulnerabilities. But how is it possible that I used the correct version of the media downloaded from vmware with the hash SHA correct but the version extracted by VI and web client are different?

  Hello

  your build number is correct:

  vCenter Server Appliance 6.0 U1

  2015 09-10

  3018523

  3040890

  Tire of VMware KB: product VMware correlating build numbers to update level

  The version number in the program itself does not match the build number, the installer will show you:

  Versionshinweise zu VMware vCenter Server 6.0 Update 1

  Build number of ISO 3040890

  vCenter Build of Windows 6.0 U1 3018524

  vCenter 6.0 U1 Unit Build 3018523

  Tim

• Strategy for the SSO with multiple vCenter servers.

  We are upgrading vSphere/SRM 5.0U1 for vSphere/SRM 5.5U1 with multiple vCenters in our environment. After reading 2058239 KB:

  VMware KB: installing vCenter Single Sign-On 5.5 on a Microsoft Windows platform

  We install SSO on a separate Windows Server and choose vCenter Single Sign-On for your first server vCenter Server for this first instance. Now my question is for the following facilities as the vCenter for MRS or vCenters which manages areas replacement fault which option, existing site or new, do we choose? Thank you

  
  

  You have therefore three sites.

  The first time, you will choose vCenter Single Sign-On for your first server vCenter Server.

  For the second one on the same site, you choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  Now, when you come to an another site vCenter and third, you will need to decide if you have a site that is your main or you want to still have a site on the second.

  If you decide to join at the elementary level, that you will yet choose existing vCenter Single Sign-On for an additional vCenter Server in a site.

  If you choose to have another site, you choose vCentre of Single Sign-On for an additional vCenter Server with a new site.

  The end of it, you will have to make the decision to design. I can only tell you what they mean. Make sure you have adequate connectivity between sites.