Help, please! OFFICEJET PRO 8600 & OFFICE JET PRO X576DW MFP INSTALLATION/UNINSTALLATION ERRORS

Similar Questions

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• Printers HP Officejet Pro X576dw multifunctional hangs when he falls asleep.

  Hello

  We got a new HP Officejet Pro X576DW in mid-July, and we have set up on a wireless network.

  The printer prints super fast and everything works great when it works.

  However, the problem seems to occur whenever he goes into sleep mode after 2 hours.

  The printer is not wake up when a print request is sent, and it often results in flashing all buttons & LCD screen that requires a reboot.

  Updated the firmware of the printer for the last, and we have the same result.

  Y at - it a fix for this problem, or should we just return the printer because we are still in the return period of 30 days from Staples?

  Thanks in advance!

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  1. define a static in the printer IP address (click here) out of the DHCP of the router Beach (check your manual).

  It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this

  first of all if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off. Or use the printer

  Assistant, printer Home Page (EWS).

  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.

  4. If necessary and you have assigned a static IP address, try using 8.8.8.8 for the preferred DNS server and

  8.8.4.4 at the level of the auxiliary DNS server.

  In the router: (refer to the manual of your router for more information)

  5. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  6 choose the router to 20 Mhz only, or 145Mbps router function.

  7. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  8 disable the WPS and never use it and disable the UPnP for the security of routers. No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  9. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  10 broadcast SSID must be enabled.

  11. save all settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.

  12 turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

• Error message C8190014 to the FIRST boot of the NEW HP Officejet Pro X576dw

  Hello, a few minutes ago, I tried to install a brand NEW HP Officejet Pro X576dw (out of the box) for the FIRST time (it is not my FIRST printer installation!). Of course, I followed detailed procedures. When I pressed 'Start' I've seen for a very short time the first image on the screen where I have to choose the language, but before you make a choice, I get a bluescreen error mentioning C8190014 and after a second, I get a screen where all the icons are flashing and message: close and re-launch your printer.

  The process of re-starting organizes not anyhting!

  Help! And thanks in advance.

  Solution: you call HP support , your printer is considered DOA (dead On Arrival) , you get a credit note , return you the printer (at your own expense) , and you buy another (you pay once more transport) !

• HP Officejet Pro X576dw: HP Officejet Pro X576dw is not compatible with Windows 10

  I am looking to buy this printer and I was wondering if it will work.  HP Officejet Pro X576dw is compatible with Windows 10?

  The Officejet Pro x576dw has a driver available for Windows 10 full featured.

• OfficeJet Pro x476dn MFP: paper jam not clearing of documents automatic feeding

  Hi all

  I have an Officejet Pro x476dn MFP, which has an automatic paper feed paper jam. The paper is cleared, but the charger always record a jam. I followed the instructions on the printer and in the downloaded user manual from HP.com. I have also checked the sensor flag hangs freely and blew out with a can of airto feeder remove any accumulation of dust or particles of paper. I even half loaded a sheet of tissue paper on the larger particles that may stick. I also checked all other jam points have been cleared.

  The exact error I get is "paper (title)... jam. The original is stuck in the autoloader of Document (CAD). ' Open the ADF cover, remove and reload the original and then try again.  This printer is less than a year and I come to you for more information before you contact HP. I still can not print, but can not scan or copy (cannot return to the home screen). If you need made more information let me know.

  Thank you

  Mike

  HP sent a technician to replace the automatic document feeder.

• OfficeJet pro x576dw

  We have purchased a HP Officejet Pro X576dw and want to know how to stop receiving faxes reports every time send us a fax. Waste of paper and ink.

  The setting is in the "Advanced Fax Setup" and called 'Fax of Confirmation', the options are: Fax Send, Fax receive, to send and receive and Off. Select 'Off' will be stop printing a confirmation page.

  This info is on the manual page, user 19: http://static.highspeedbackbone.net/pdf/HP%20OfficeJet%20Pro%20X%20X576dw%20Multifunction%20Printer%20Manual.pdf

• HP Officejet Pro X576dw: Wireless Direct Printing using the Lan cable

  Hello

  I buy HP Officejet Pro X576dw multifunctional on tomorrow. I understand that this printer has a direct wireless printing features that I can print from my tablet or IPad.

  But I doubt if this wireless direct printing can be done while the printer is connected to the network via Lan cable permanately IPV4.  This means I can print from my mobile phone at anytime via Wireless Direct without the Lan cable.  Kindly advice. Thanks in advance.

  David

  Oh, which means that you simply unplug the Direct SSID wireless and you should be able to print via your router LAN cable now.

• HP officejet pro 8600: office jet pro 8600 scan generates only black pages

  Scanner worked fine until today when I tried to scan a page.  Print and scan 4.9 doctor says my scanner is fine, but scanned page is black and adjustments do not change this.  Also, I used to be able to add a page or more and who went with Windows 10.  This machine is 4 1/2 years and not under warranty.

  Hello @kathy817, hope you are well!

  Thank you access the Forums from HP Support for extra support! It's a good place to find the help you need, other users, HP experts and other support staff.

  I see that you are having problems when parsing printer Officejet 8600. Could you please try and make a copy of the photo on the printer? Let me know if the copy option works very well.

  If the copy also gives you a black page, try the following steps:

  • Unplug the printer from the power outlet.
  • Wait 2-3 minutes and then plug back the power cable directly to the wall outlet (do not use a surge protector or an extension cord)

  If the copy is fine, please let me know. In addition, tell me how the printer is connected. Is it connected using USB or wireless?

  I'll watch for your reply. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Office Jet Pro 8600: office jet pro 8600 clear the display

  I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools...  It isn't that I know where they are and who's who for the most part.

  In addition, scanning is not clear.  Everything is faded.  However, it still prints and faxes by a fine.  I hope I don't have to buy a new All In One Printer.  I finally got most of the glitches and tricks when I have a problem with it.  Is it possible that there is a light bulb needs to be changed or something?  I appreciate your help & feed back as soon as possible.  I use in an office on a daily basis.

  Kind regards

  Meredith

  Hey @mere4340,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.

  If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Please HELP WITH OFFICEJET PRO L7580 - HP Imaging Device Software Funstions for Windows Vista

  I have a HP Officejet Pro L7580 - connection with laptop Dell and Windows Vista PC.  I did not have printing problems, but has been unable to fax or scan.  I uninstalled the software and put back in place to make sure I had the latest software and compatibility for Vista.  I can now fax but when I try to scan, I get the following error: No analysis Options - refer to device documentation to troubleshoot issues - only, there is no documentation of the device...

  When I went to the HP site to install the latest version of the software, I've installed the full functionality & driver software... guess I thought that this would have everything that I need, but it seems that the software of HP Imaging Device functions was not installed...

  If anyone has had this problem and what should I do now?  Thanks much for any help you can offer!

  Please texasgirl try this:

  http://support.HP.com/us-en/document/c04134999

  Good luck.

• Help HP OfficeJet Pro 1150c cables

  Hello

  I just got this new but all-in-one wireless,

  can I connect it via the usb port on my laptop? What should I buy?

  need help please, I'm a good model

  Message edited by hel on 09/09/2009 11:51

  Hel says:

  I just got this new but all-in-one wireless,

  can I connect it via the usb port on my laptop? What should I buy?

  The Officejet Pro 1150c is a fairly old printer, it was originally released with WIndows 3.1 and Windows 95 drivers a decade or more.  You can download the manual here.  The printer needs an IEEE-1284 parallel connection.  The best cases if your laptop has a parallel connection are to use a parallel cable IEEE.  If your laptop is not a parallel port things are more problematic.  Depending on your operating system, you can get a USB cable IEEE-1284 converter and make it work.  I have not seen a lot of reports of success using cables lconverter USB-parallel with Vista, XP seems a little more usable in this regard.

  If you are using Vista, you will probably be able to print using the Deskjet 500 c drivers into Vista.

  Kind regards

  Bob Headrick, Microsoft MVP printing and imaging

• OfficeJet Pro 8615: get the Communication Error Message even if the printer prints

  Whenever I have print using my USB connected 8615 Pro, the printer prints , but it is different because I still have the error message firt my computer cannot communicate with the printer. Everything is up-to-date. When you ran the scan & print Dr, there is no update, he contacted the printer (which took less than 10 minutes), then I clicked on the print correction tab. After all a late minute two or so, I got the unable to communicate the message BUT it printed the page test OK after 30 seconds to a minute. Any suggestions?

  Hey @C_Wolf,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing to your Windows 7 PC to your Officejet Pro 8615 e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Remove the USB cable to the back of the printer.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for any other icon of your printer listed.
  7. Connect the USB cable.

  Please let me know the results after following the above. If you are able to print quickly, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• OfficeJet Pro 6830: Alignment of printhead error.

  Hello. I have the above printer. I get the message print head alignment error. I have unplugged and restarted, he could usually get another page or two either printed or copied, and now I can't get anything to print. It gives me just the error message from the print head alignment. I've been very busy and it worked when I did this as mentioned above. Since it stop working completely, I checked in to see that the warranty has expired on 01/06/16. It must be a problem on this particular printer, as evidenced by what I read online. I wonder what I can do? HP Will stand behind this printer, since it has this problem, even if it's beyond the warranty period of 23 days?  

  Model #: E3E02A
  Serial No.: [personal information]

  Hello and welcome to the community of HP @WapitiRoyal,

  I understand that you have a problem with the printhead on your HP Officejet Pro 6830. I'll be happy to help you.

  Here is a link to a document that provides instructions on how to fix your printer. Please follow the steps and let me know the results.

  68xx - error 'Problem with printhead' HP printers (Americas and Asia)

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Error B835B846 on an Officejet Pro x476dw MFP

  I have a MFP HP Officejet Pro new x476dw - which I was really happy with. Until last night. He got a print job that is stuck in the pipeline and we couldn't do delete. I would say to delete, I'd say it was deleting and then nothing. Tried the device and the computer. Finally managed to remove print jobs, and he began to print again. Walked into the office this morning and someone tried to print and complained that the printer did not work. Walked over to him and he had a white screen that says "Pleaase stop printer, then on again." Were all indicators that surrounds the screen flashes quickly. The power button had no effect - which means that it would not turn off the machine. Had to pull the plug, which he did not because he told me when he walks back to the top. After the white screen, she flashed a blue error screen that shows the B835B846, I think. She flashed so quickly the first couple of times I had to video the problem/process in order to catch the number. There is no code error with this number on it in the HP website.

  I downloaded the HP scan and doctor to print and he can't get it to print. Any ideas?

  I tried to turn it off again to restart, but it will turn off. I finally got frustrated and just unplugged the darn thing. Left the Office for a couple of appointments and returned a few hours later. He plugged back in and voila! Print again. Don't know what bug he had his behind, but it was not happy! Don't know what unplug and leave for a few hours has done for her, but solved my problem. Now, let's see if other agents in my office can print on it when they bring their laptops!