HP Deskjet 460 flashing and will not print - help!
Hello
I have a problem with my printer. The power and light of the resume light flashing and even though I followed the instructions from HP below, I can't make them stop. It doesn't seem to be any paper jams. What can I do?
Thank you very much
Ali
Question
Power light and the flashes summary.
Hello
Observation says:
Hello
I have a problem with my printer. The power and light of the resume light flashing and even though I followed the instructions from HP below, I can't make them stop. It doesn't seem to be any paper jams. What can I do?
Thank you very much
Ali
Question
Power light and the flashes summary.
Rose 17: Power LED flashes and the flashing resumes
Tags: HP Printers
Similar Questions
-
My MX430 keeps going offline and will not print
My MX430 is set up for wireless printing and keeps going offline and will not print. I reinstalled the software several times, and it continues to be. This is my only printer and is defined as the default value.
Hello sallyb.
Printer offline may indicate that the printer driver is not configured correctly. Please, try the following to resolve the problem:
1. click on start.
2. click on Control Panel.
3. click on hardware and sound.
4. click on devices and printers.
5 right-click the MX430 printer, and then click printer properties.
6. click on the Ports tab.
7. make sure that the check mark is on the port that begins with CNBJNP, then click OK and try printing.
If the port CNBJNP was already selected if please try right click on the MX430 printer and click on see what printing. When the queue opens, click on the printer and uncheck on use printer offline by clicking on it, then try to print again.
-
Printer is offline and will not print documents
Printer is offline and will not print documents, the rocker switch "Printer offline" option is not available and it is constantly check on 'printer offline '.
How can I fix this so I can print the necessary documents?
Hello destiny.
Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.
The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would be grateful if you could help me with more information.
- Is the printer connected directly to the PC or it is on a network?
- What is a printer wired or wireless?
- What is the brand and model of the printer?
Try the following and see if it helps.
Method 1: Disable Antivirus
If you have installed any third party such as antivirus or firewall security software, I would say you temporarily disable and check if it works.
Disable the anti-virus software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.
Method 2: Update the drivers for your printer.
For more information, see these links:
Updated a hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyFind and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
Method 3: Restart the print spooler service.
You must be logged on as administrator to perform these steps.
a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click the print spooler service and then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation,
type the password or provide confirmation.If nothing works, then manually add the printer to the local port and check.
Method 4: Manually add the printer to the local port.
b. click Add a printer, and then select Add a local printer. Click on create a new port. The default value in the drop-down list is Local Port. Don't change that.
c. click Next.
A dialog box appears for you request that you enter a port name. Type the name of \\computer name\printer.
d. type your user name and the name of the printer (name \\PC\printer)
e. click ok and exit.See also:
http://Windows.Microsoft.com/en-us/Windows7/share-a-printerhttp://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions
Hope this information was useful. Let us know the results once you have tried these methods. We will be happy to help you further.
-
black and will not print on hp Photosmart Plus B210a of Window Vista model
black and will not print on hp Photosmart Plus B210a of model
The post here could help solve the problem. Be sure to check the vents.
-
My printer recently started telling me it was in a State of 'error' and could not print my documents. Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks. Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on. The HP Web site indicates that it is connected. It is the second computer from HP Officejet 4620 of the original that I bought. The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.
Hi @Janilynn,
Welcome to the HP Forums!
I read your post and wanted to help.
I understand that the printer does not print when the computer shows that it is connected. Please run the print and scan the doctor.
I would like to know if it solved the problem or gives you an error message.
If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.
Kind regards
-
I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?
Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.
Hi, dadzippytr,
Click Start and type services.msc
Press enter
Scroll down to print spooler
Right-click on the spooler and select stop
Wait for Windows to stop the spooler
Close the window
Control Panel > printers folder
Right-click on the printer icon and select open
Click file > cancel all Documents
Close the window
Start > right click on computer
Click on manage
Select Device Manager
Click on the + sign next to the Ieee... compatible printers
Right-click on the driver and select uninstall
Click on the + next to imaging devices
Right-click on the driver and select uninstall
Click on the + sign next to printers
Right-click on the driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the printer driver and select uninstall
Close the Device Manager
Restart the computer
Windows will reinstall the drivers
Go to the manufacturer's website and search for updated drivers
Don't forget to come back to services and start print spooler before printing again.
-
Lexmark Interpret S405 is not communicating with the computer and will not print
My computer works with Windows 7 and updates automatically. I got the Lexmark Interpret S405 for 18 months, and it has worked great until a couple of months. When I try to print, I get an error message indicating that the printer is not communicating with the computer. When I check the printer, it shows he's ready. The print job shows that it is ready to print, but nothing happens except for this message. When I try to erase the impression, it really takes a lot of time - usually have to unplug the printer so that it can finally clear. Then it still will not print if I try again unless I restart the computer. Lexmark support page says that there is a problem with Windows 7 and their product. All the solutions for this problem yet?
Computer model of the bridge ZX6970, OS 64-bit, intel CORE CPU I-13 3.30 GHz, Windows 7 Home Premium. Can someone advise a fix for this problem? Thank you!
Hello
Have you tried to download and install the updated firmware for the Lexmark Interpret S405 from the manufacturer's website.
If this isn't the case, please download and install it.
Download Firmware for your printer!
We know the results.
-
My M177fw MFP shows paused and will not print, either wireless or with USB
I try to print wirelessly with my printer HP MFP M177fw. It shows "ready to print", but does nothing. If I delete this print job, it shows "printer paused".
Hi joanieo,
By your post, I see that you are unable to print to a USB connection or wireless.
I can help you with this problem.I'd do a power reset to see if that will solve the problem.
When the printer is still lit, disconnect the power cable from the back of the printer.
Then, disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable to the wall outlet first, then the back of the printer and turn on again.
Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)
For the USB connection, have the printer connected directly to the computer. (not a hub or a docking station)
It should not be more then 6 feet. Make sure it is a 2.0 and not a 3.0 cable. Also check the ports on the computer, they are 2.0.
Try and print a self-test on the printer hardware to see if it is a hardware or software problem.
What is the IP address?
Try to print from the computer.
If you're still having problems, then go through the steps described in this document provided, to see if she will help solve this problem.
"Printer is off-line" Message appears on the computer and the HP printer does not print.
Printing and scanning doctor could solve the problem automatically.
Please provide detailed results if you're still having problems.
What operating system do you use? How to find the Windows Edition and the Version on your computer.
Let me know the results of printing and scanning doctor. (error messages, printed test page)
Good day!
Thank you. -
1320c light orange flashing - error will not print
Orange error flashes on my 1320c printer. When I turn on the printer, everything looks OK. Then, a few minutes later the orange error light flashes.
I tried to print after turning on - before slight error could have lights... done printer looks like it was a gear to printing then stopped and orange flashes.
I wonder if it is the fuser unit? I've checked everything. Fuser is not hot - which made me think that it wasn't heat. How can I solve this problem?
Printer is around the age of 16 months. Use of light.
I can't find 'reset button '. Nothing like that inside the side door. You kindly would tell me where exactly it is?
Thank you.
-
Kodak esp7 all in one, error paper jam and will not print
Original title - the printer printing
Kodak esp7 all-in-one, says error paper jam but there is no habit of printing jam
Hi Barry,.
I suggest you to follow the instructions provided in the article below and check if it helps.
I suggest you follow the instructions in the manual.
http://resources.kodak.com/support/PDF/en/manuals/urg00976/ESP7_UG_GLB_en.PDF
Note: See page 72. Also, follow the instructions provided in the article below.
Crooked prints and paper jams
See also section below.
Solve printer problems
I also suggest you to contact Kodak support in this regard.
http://support.en.kodak.com/app/home/selected/true
Hope that this helps, if you have any additional questions, feel free to post. We will be happy to help you.
-
All my email preprint show as spam and will not print
I created the account to allow only some email accounts send to eprint, but I get messages from them all say the email looks like spam and won't print.
I'll need a little more info to help. What mail server you send the job-ePrint? What types of files / attachments are you sending? Because it does not reach a certain level; make sure that when sending e-mail to the printer the printer is the sole listed beneficiary. If we don't do it will fail the job as spam. Be sure to not anyone on the Cc emails. In addition, turn off your signature on e-mail if it is automatic and repeat the work.
-
My C309A, connected via USB, my system worked very well through the life of WIndows 7 and Windows 8.1, until this week.
I did run the software in PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 4.exe and then this week I received notice that there was a software update. I downloaded and installed PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 5.exe, and now my printer does not print.
I uninstalled the previous version, without error and installed this new version, also without error. But, when I click on printer properties
I get a protection fault.
If I try to print a test page, the system hangs for a few minutes, then the devices and printer page is closed (with no message).
I tried the Ethernet connection instead, but that made no difference.
Interestingly, even if printing does not work, scanning and fax are. I can connect to the scanner from Paperport or Adobe Photoshop Elements.
I uninstalled the software several times and tried both the old and the new, and they both do it.
I tried to run print and Scan of the doctor. Who says that the driver is missing some files and to uninstall and reinstall, but I did it at least 6 times without success.
Any ideas?
Thank you
Stan
FWIW, I have set the printer by improving the system to 10 Windows (which went very well). It works fine now.
-
HP LaserJet Pro MFPm127fw: Printing Chromebook stuck in class and will not print
My printer cannot print - things are still ongoing, but stay there for days until I delete them. Everything is turned on and connected. This printer has printed successfully for me before, but it goes through these phases where it stops printing and it has not printed for a week now. I uninstalled, re-installed, all done. My HP Chromebook detects the printer, shows pending print jobs, but they do not print. Other aspects of the printer are very good, IE. Fax works. I even don't try to use the email address to send documents to the printer... nothing works.
I'd appreciate any help.
Thank you
Hello
Please try to use printing HP extension for chrome to see if that helps. I've included below installation instructions.
-
c 510: hp estation 510 is offline and will not print
recently changed wireless carriers, and now my printer is not working. the screen of the computer says printer is offline. the printer says its connected to the wireless network. Help!
I uninstalled the printer from my computer and then reinstalled. It worked!
-
Envy4500: Computer says printer is offline and will not print, but it's online
I jumped through all the hoops of tech and there seems to be no perfect solution to this problem. However, can I change my settings wireless direct on with security on without security on Off, and at any time, I am doing this, work in Quebec will begin. But I have to do it almost everytime I have print something. I need to scan from my remote IO. Let me know if HP has a better solution. Obviously, the computer is not properly talk to the printer. I started having this problem after Windows 10, but yet curiously, so I don't think it's a matter of Windows.
Hello
Thank you for using the HP Forums.You can try this:
Creating a TCP IP port
1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
4. Enter the IP address of the printer.Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
Hope that helps!
Maybe you are looking for
-
80 GB, iPod Classic, Windows 10 synchronization problem
Firstly, apologies if this is an ancient question. There are so many threads that it is not easy to find the right one. My 80 GB Classic iPod has worked with Windows XP and Windows 7. When I got a new computer and upgraded to Windows 10 iPod was se
-
Want 5660: want manual user for printer HP 5660
I just got this printer and would like some instructions on how it works. That is to say: how to change printer of color to B & W or vice versa. How to set up for printing images on smaller print - etc.
-
Some how my email was requested to be removed and the link to verify that I DON'T want be removed takes me to some site randomly, please help.
-
I tried to make a simple seq using a reminder of database options (access database). I get data in the table UUT_RESULT, which mean that the result of my test of numerical limit is not connected. Is something wrong with the schema parameter? Where ca
-
Driver package DAQMx with my generation to install Labview application?
I'm under Labview 7.1.1. How to package DAQMx drivers in a program and the subsequent installation. BLD file? I VI application that uses the DAQMx drivers and I want to be able to create an executable file and the installation program that will insta