HP Envy 4-1115dx-keep rebooting after restore

Similar Questions

• Windows 8 keeps rebooting after installation

  I need help.

  So, after the death of my hard drive, I picked up a new and installed windows 8 via a USB port.

  After having met a loop without end of installation, I arrived at the first marketing of the time. However, when I got the sign in the section, the pc crashed and restarted. Then it happened again and again and again.

  At one point, he gave me a Windows has not been loaded properly and gave me a lot of options. I tried auto repair, didn't work. And now it will not even to that screen more, have a "disk read error" every time the AutoFix runs and restarts.

  Any help that can be provided will be appreciated.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can't start your computer, Windows 8 and it keeps restarting. I will certainly help you get this fixed number.

  I suggest you follow the advice given by Mann_Manohar answered December 29, 2014 in the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/a-disk-read-error-ocurred-message-on-boot-Windows/f1c2336d-3adf-4D37-AB35-beb4f10ea16d

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• PC laptop Envy 15: WiFi keeps falling after upgrade HP Envy 15 laptop for Windows 10

  I asked HP remote support to fix the adapter Intel Dual Band Wireless AC 3160.  They uninstalled and reinstalled the driver to the latest version 18.30.0.9 dated dated 03-11-2015.

  WiFi connection a bit improved, but after a longer period of use, it is back to the previous state of connection loss after running for a few minutes.

  The error showed in troubleshooting is "the wireless works do not.  However the services indicated in the Task Manager are all performed correctly.  Sometimes, it can be retrieved with the troubleshooting procedure, sometimes not.

  HP has the right driver Wireless Windows 10 on the map?  I've exhausted every possibility by ensuring that the driver is up-to-date.  Connection Wi - Fi worked well in point 8.1 of Windows before upgrade.

  I discovered after the application of the "Cumulative Update for Windows 10 Version 1511 for x 64 systems (KB3116900)", dated December 8, 2015, the disconnection of wireless automation problem seems to go away.

  I've been running on continually of the Wi - Fi connection for the last 24 hours on different routers after the * beep * update.  The WIFi connection has not declined.

  It seems that Microsoft has fixed this issue with the version of December to win 10.  If anyone else can check?

  https://support.Microsoft.com/en-us/KB/3116900

• Sony vaio vgn-fs515b xp home edition keeps rebooting after loading screen xp

  I have a sony vaio vgn-fs515b with windows xp home edition and all of a sudden, he continues to go to windows xp loading screen and then guard reboot until you shut it down does anyone have an idea what is the problem and how to fix it?

  Hi arissavva,

  I may have a hardware problem; I suggest you to contact the manufacturer for more help and information.

  http://eSupport.Sony.com/

• BlackBerry 8800 Smartphone keeps rebooting after installing v4.5.0.110

  I upgraded my att 8800 v4.5.0.110 and every time that the 2 GB kingston memory card is in the device restarts continually.  If I take the memory card, the phone seems stable.  Because I need the memory card for all kinds of objects that I store on the phone, does anyone have a solution or at least a way to debug this problem?

  Thank you

  Read this on how to correct the media card (courtesy of John Clark, a different expertise here in the Forum):

  1. remove the card multimedia unit and put it in a card reader. This makes the rest of the process much faster. However, you can do it with the card in the camera.

  2 copy all the contents of the card on your PC.

  3. replace the card in the camera and go to Options > Media Card > Menu button > card. You wipe the card and reformat. (if using a card reader to remove the card and put it back in the drive).

  4. now copy backup ONLY in the media to the device. Don't copy back all the 'BBthumbs.dat' files or all system files. I went through the entire folder and delete all .dat files before copying the content of the music folder and the folders of photos to the device. The device will re-create these files. Also, I is not copy folder "current music" but rather just copied content and pasted into the folder \Blackberry\music of the card. Do this for each folder.

  5. Once finished put the card in the camera, and then try again the media App. He must walk to the music. If you have a lot of music can take 5-10 minutes. When scanning, you can open the music application and you should be able to see the songs move in the list when the device will navigate

  If after the transfer of all your files back, you still get a stuck scanning bar or device restarts so you have a file in conflict on the map. I saw video files to do this, but it could be a music file too or (less likely) an image file. Remove all the files you transferred and see if restarting to stop him. Then add each file one at a time to see if you can narrow the file which is the cause. When you have found the folder, and then you can refine to a particular file.

• computer could not reboot after the system restore and now do not start or respond to f2 or f8

  My brother prefomed a system restore, after restoring the system, that it has restarted, however never got to the windows form.

  Then he turned the system with a difficult start, which got stuck before the windows screen.

  so after I told him trying to start with f8 during boot, this has had no response.

  then I had him find his records recovery and told him to start while now the f2 and his computer crashes when you try to find its usb devices.

  I have no idea of what is wrong and worry that it will not respond to f8 or f2 start

  Look at the top right of your keyboard.

  You can have a F-Lock key that prevents you using F2 or F8.

  See you soon. Mick Murphy - Microsoft partner

• PC keeps restarting after that I copied some files

  my pc keeps restarting after countless attempts trying to remove this file dvd that I copied from a dvd. When I tried to delete this file using a different account, the cycle just repeats.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• When to reboot after deleting or adding a program

  I'm doing a system reformat on my computer. I would uninstall all the frivolous programs that came with the computer (for example, the evaluation version) until I put a new system restore point. My question is: if I have TO RESTART my computer after EACH program I uninstall it from the control panel (Add / Remove Programs)? OR can I just "delete" them all at once, then do a restart.

  Similarly, can I restart my computer after EACH application I have installed? For example, to install Norton 360 > restart > then install MS Office > restart > then install Adobe Creative Suite > restart > etc, etc. ?

  I personally would like to always re - start when asked.

  Not all programs will require a reboot after the installation or the removal, so in your situation I would re - start when you are prompted.

  If you don't re - start whenever there is a (small) possibility that some files can not be erased when you re-boot.

  If you are looking to get rid of all the pre-installed stuff, look for a program called "de-Crapifier PC", I have not used it myself, but it seems to have a lot of comments and recommendations in all popular PC press.

  HTH

  Neil

  www.nwarwick.co.UK

• When I reboot after installation of service pack 2, the message comes out and says that updates are not configured correctly, returning from changes

  When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.

  Hello
   
   
   
  1. how you try to install Service Pack 2?
  2. are you able to boot to the desktop?

   

   
  Method:
  Step 1: If you are able to start the computer in normal mode, then try a clean boot.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  Please note: after troubleshooting, start the computer in normal mode.

   
  Step 2: Try to install Service Pack 2 manually.
  http://www.Microsoft.com/en-us/download/default.aspx
   
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  
   
   
  If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
   
   

   

  If you are unable to install Service pack 2, you can consult this article.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

  Please note: method 2 refers about upgrade on site.  Perform a repair installation/place will not damage files and applications that are currently installed on your computer.   However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot.

   

   

   

   
   
   
   

• HP MS235 pavilion in a single reboot after the start screen guard

  Hi all.

  can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

  What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

  Please can someone help! Thank you.

  Concerning

  Dave.

  Start at this page: http://support.hp.com/us-en/document/bph07143

  Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

• BlackBerry Z10 z10 usb keeps diconnecting after faulty security wipe

  Hello

  I just tried a security wipe and got the icon "connect the phone to the computer" when starting. In fact, the phone is blocked here. My phone usb cable everything worked fine earlier today, but now it just keeps disconnecting after 1 or 2 seconds. I have already installed the BB link and it does not recognize my phone but I can't reload, because it keeps disconnecting. Any suggestions on what I should do? Will be a great help, thank you.

  Here is the official solution for a deletion of security failed:

  http://www.BlackBerry.com/BTSC/KB33480

  If you do not link to recognize the device then I would try to load the operating system manually:

  Download the correct autoloader for your device from the first post in the thread below. You need to know your complete model number (e.g. STL100-1 (or - 2,-3, - 4) located in settings > on.) Be sure to download your model which contains the radio file.

  10.2.1.1925 OS: http://forums.crackberry.com/bb10-leaked-beta-os-f395/lengend-presents-10-2-1-1925-all-q-z-887047/

  Close the link and leave the connected device.

  You will need to unzip the file downloaded from above before you can run.  If you do not have a decompression application on your computer, you can download 7Zip here: http://www.7-zip.org/download.html

  Double-click the automatic charger that you downloaded.

  The process should take about 5 minutes or more. When it's done, you will need complete the startup process before you can connect to Link, and restore the data.

  When you are finished, you can restore your backup, although I do NOT recommend restore your backup of the settings that it is best to start with this new OS, but it is up to you. You may experience some bugs here and there to restore the passage of the backup settings. Media and Application data seem to be OK to restore.

• HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs

  HP m9500z is crushed, able to reboot and restore, now no start HP screen, just hangs. After disconnecting the power for several hours, I was able to get the system running, ran scans disk for errors, no problem.  a few minutes after vista is that it crashed again.  When you restart the fans launched full speed, no start hp at the start screen, nothing.  I tried to reset the CMOS using the jumper trick, nothing.  removed the battery, nothing.  I even tried the blind stuff, I have seen suggested, as pressing F10 for 8 seconds, etc..  during one of the last times before that it's totally off I ran the diagnostic of the system BIOS, everything was fine.  I think I have a corrupted bios.  Any ideas? Could be a motherboard fried, but I hope that its not so bad.  Product num nh836av-aba.

  From your description, I would unplug the video card and the video shipped by train.  The specifications of your mb should be these: http://support.hp.com/us-en/document/c01635688

  Please make sure you have an esd protection and immerse in your unit without first physically disconnect power to the wall outlet