HP Envy 5643: HP Envy 5643 "is" not my SSID

Similar Questions

• HP Envy 5644: My hp envy 5644 does not install drivers for my laptop

  my HP envy 5644 some drivers will not install and cannot use the eprint button. tried to click on the set up button and accept the terms of use, but he said: "the printer cannot connect to the server...". "I printed the report and the diagnostic results: PASS all except the DNS: confirmed in case of FAILURE. I followed the instructions for the solution indicated on the report but nothing happened.still the same. I have not the scan doctor on my desk since I can not install.part of the software is installed, the portable computer recognizes the printer. I can't turn on the printer web services. tried pressing the eprint icon, turned again, and the fact the educated solution but nothing happened. * use the Wi - Fi

  Hi @CuriousMind,

  Welcome to the HP Forums!

  I see that your HP Envy 5644 will not install the drivers for your Windows 7 laptop. I'm happy to help you!

  To download the scan doctor, see this website, HP print and Scan Doctor.

  Otherwise, I recommend you to go through this guide, a "cannot find the printer ' display the error to the HP ENVY 5640 and DESIRE 5660 e - all - in - one printer series."

  Hope this helps and have a great day!

• HP ENVY 7640: new HP Envy 7640 will not feed documents in scan mode

  New HP ENVY 7640 will not feed for scanning documents.  It transmit documents in copy mode but not when you try to scan several pages.

  Hello

  Thank you for using the HP Forums.

  Have you installed the software features FULL?

  If this isn't the case, please download and install the FULL features software:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-7640-e-all-in-one-printer-series/6617267/model/6617268#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have done this, launch the Scan software (via the HP printer Assistant) and make sure that the source is "heavy use document feeder.  (Example shown)

  

  For more tips scan, please reder to this resource:

  Scanning for Dummies

  Your printer uses the NEW interface of scanning.

  Hope that helps!

• HP Envy 4500: URGENT - HP Envy 4500 does not print with only a black cartridge

  Hello

  My HP Envy 4500 will not be black and white print with just the black cartridge. I want to use the color cartridge, which is almost empty. Result: my pages get printed in a greenish color. I can't select the option "only use black cartridge" in the print option either (it is disabled). I tried to delete the printer and re - install again but it doesn't change anything. I use a Mac with os x 10.6.

  I need to print important documents quickly, so any quick help is more than welcome!

  Thank you

  Gunther

  Use single-cartridge use the HP ENVY 4500 series with only one cartridge.

  Mode single-cartridge begins when an ink cartridge is removed from the distribution of ink cartridges.

• HP Envy 120 do not print

  My printer HP Envy 120 is not printed correctly.

  The printer accepts the job, pages come out of the printer, but the only thing that appears on the page's hyperlinks. I tried printing from three different computers and printed various documents Microsoft word but its all the same impression.

  Is there something you would suggest that I should try?

  Thank you

  I would try the doctor print and scan to see if it will detect and fix the problem automatically

  Try printing HP and Scan Doctor for Windows

• HP Envy 5540: HP Envy 5540 does not scan

  Hello

  I just bought an all-in - One HP Envy 5540 and installed on my PC running Windows 7 Home Edition (64-bit).  I did the whole upward online and printer and copier work without problem.  But the printer won't scan to my PC.  (I use a USB, is told by the way).

  When I press the icon 'Search' on the printer, I get an error message that says: "no computer found."  He then gives instructions to "open the HP printer software, select Actions 'Scan' and then select 'Manage the computer analysis'."  The only "software" I can find is the downloaded "printer Assistant", who does not have a tab "Scanner Actions."

  I tried to download the "Scan" doctor and still running the 'fix', but it did not work after following all the instructions, including unplugging them, restart the PC, etc.

  Any ideas I can try please?

  Thank you.

  PS update: after a stop during the night, today - when I press 'Analysis' - the printer is set up a list with my computer upstairs (another entry said "no computer not listed").  When I press the icon for my computer, I get a brief 'access... '. "message as he tries to connect.  I get then a message saying "connection required.  The selected computer is not available.  Ensure that:-l' computer is turned on; -l' computer and the printer are connected properly with a cable USB; -the recommended HP Print software is installed and configured on the computer. »

  The only one I am uncertain is the last of them - but I guess he has everything installed and configured, because everything else seems to work.

  Still stuck!

  Hello
  
  Thank you for using the HP Forums.

  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5540-all-in-one-printer-series/5447939/model/5447940#Z7_3054ICK0K8UDA0AQC11TA930C7

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer
  
  Once you have installed the software:
  
  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)
  
  Scan to computer
  
  Hope that helps!

• HP Envy wifi does not

  Hello, I just got a new HP Envy. However, I was not able to maintain a wireless connection. Generally it will not connect to my wifi or connect only for a few minutes and then say 'limited' and then not at all connect. I did the full windows to the computer updates. I've updated the drivers for the wifi card. I have updated the firmware on my router. I also uninstalled norton. None of them have worked, still no connect or will connect and fall in a few minutes. My information system is the following:

  Product name: HP ENVY TS m6 Sleekbook

  Product number: EOK41UA #ABA

  [Personal information]

  BIOS (Setup): F/.05-05/28/2013 (0883100022305B 00000320100)

  Keyboard Review: 86.32

  Total memory: 8.00 GB

  Processor name: Intel (R) Core (TM) i5-4200U CPY @ 1.60 GHz

  My wifi router information is:

  Netgear WPN824N N150 model

  Channel is set to auto

  Mode: up to 150 MB per second

  Security: WPA2/PSK [AES]

  I have two ipads, two iphones, an xbox, a windows phone, two toshiba laptops and hp Pavilion DM3, which are able to connect and maintain free wifi without problem (not all connected to the certain time necessarily-, it is not a problem of overload). The network works fine, I just can't understand what is the problem with this HP Envy.

  Well, after I saw that the wifi worked in safe mode, I went into the startup applications and managed to turn them off and restart the computer to find out who was playing with the wifi. I have disabled startup motoralla bluetooth software and disabled secure boot. He is immediately connected to wifi and not him has not yet declined. Problem solved.

• HP ENVY 4504: HP ENVY 4504 does not print black ink even with full cartridge

  Used by my office printer is not printing black ink. It does not, it is out of black ink, but anything on a page I print requiring black ink is absent. I checked the cartridge to see if she had missed and the printer was not to tell me, but she didn't. I also tried to put in a new black ink cartridge, but it wouldn't print black to help anyone.

  There is no problem with color printing and the problem started only today. The black cartridge is certainly compatible with this printer as it had been good working with it so far.

  We bought this printer less than a year ago now.

  Until outside to change the cartridges I also turned the printer off and on again, but neither helped.

  I would appreciate greatly any assistance that we currently only this one printer at the office and we rely on it for a lot of work.

  Thank you very much.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5368526/document/c03768188/

  Ink cartridge information after doing all the recommendations of HP:

  Once you check the vents turn the cartridge and check the underside near the opening of the ink.  They can be of four plastic tabs near the opening are resurrected.  Make sure that the raised tabs are removed and made flush with the body of the cell.  This will cause the cartridge do not do sit properly in all of the print head and cause air that are expected.  This will affect especially the black ink cartridge.

  In particular, let us know if you find the above to be true.

• 4500 envy: Envy 4500 printer not

  So my Envy 4500 printer worked very well on the network for more than a year, but last week we had our wifi router change and since it does not print. Well, it prints, but you must put the printer off, then put it back and it will print only the first document in the queue (it will not print, you must do the same thing) I tried to make my pc and it says that "a document in the queue block printing" or something like that and it removes the document but if you try to reprint it does the same thing thing. It's really annoying to toggle the printer for each document... Thank you

  Hello
  
  Thank you for using the forum. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• Want 4504: Hp Envy 4504 does not give the impression of color

  Hello

  My Hp Envy 4504 gives color impressions.

  Its keep giving only black & white or gray scale images.

  Also, I couldn't find the printing color profiles or presets under the printer settings.

  I only 'Black and White' and ' black and white - gray ' presets.

  What should I do to get the color print.

  I have two hp color and black ink cartridges installed.

  Help, please.

  Thank you

  Hi @sivak,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print in color on your HP Envy 4504 printer. I will definitely do my best to help you.

  You are able to print a test highlighted report? The printer prints a blank Page or does not black print or ink color for the HP ENVY 4500 and Deskjet Ink Advantage 3540 e-all-in-One Printer Series.

  The problem only occurs when printing from Mac? It seems that there is a problem with the printer driver. Please see these instructions by my colleague Anti-double-U-di.

  Publish:

  10.10 yosemite, foot, make sure you have the latest updates, including Apple updates as well as updates from HP by Apple Software Update (ASU), currently HP printer software update Ver3.0

  Look for the updates (ASU) Apple
  1. click on the Apple in the left menu bar
  2. click on "about this Mac".
  3. click the button of "software updates... »
  4. make sure that the "Updates" icon is selected, click on 'Store' in the top menu
  5. click on 'reload the Page.
  6. install the HP updates (look for the last 'HP Printer Software Update"by the version number)

  Note: If you can't print or scan if he is an all-in-one HP printer, and then follow the steps below.

  Delete the print queue HP printer
  1. click on System Preferences
  2. click on printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm
  
  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  Try to print in coiour.

  If the steps above resolved your problem, you don't have to continue troubleshooting.  If you're still having problems, please continue to the next step.

  Before continues, the following steps will remove all printers to printers and Scanners, you may need your software and drivers for the printers to re - install if it is not part of the Apple software updates.

  Reset the printing system:
  1. open System Preferences
  2. open Printers and scanners
  3. on the left side where would be referred to as printers, right click and select "reset printing system...". »
  4. click on the "Reset" button when asked to confirm
  5. Enter your password, and then click OK (if prompted)
  6. Once completed, (notifications cannot pop up) you will simply see the Virgin 'printers & Scanners', just close

  Remove the software from HP/Hewlett-Packard:
  1. go on 'Finder '.
  2. go in "Applications".
  3. Locate and open the folder "Hewlett-Packard".
  4. If you see an "Uninstall HP program" listed here then run the uninstall program, otherwise, go to step 8
  5. click on the continue"" button.
  6. Enter your password, and then click OK (if prompted)
  7. When you are finished, click "exit".
  8 remove the HP folder or Hewlett-Packard (if still listed after uninstall) drag the folder to the trash
  9. right click on the Recycle Bin in the dock, click on "Empty" - and then confirm to empty the trash

  Repair disk permissions
  1. in the Finder, click Applications
  2. open the Utilities folder
  3. double-click on the disk utility
  4. on the left side, click on the hard drive which has Yosemite 10.10 installed to highlight
  5. click on the "repair disk permissions" nearly half lower the window (time may vary to finish)
  6. what repairs completed, a message near the bottom window 'Fix full permissions', now you can close the disk utility
  7. click on the Apple in the upper left corner, click "Restart" to restart your Mac

  Manually the drivers of HP printer install v3.0
  1. this link will take you to the apples for v3.0 HP printer drivers download
  2. click on the button 'Download' (remember where your download is if your downloads are not on the dock)
  3. open the "HPPrinterDrviers3.0.dmg".
  4. double-click on the "HewlettPackardPrinterDrivers.pkg".
  5. click on the continue"" button.
  6. After reading the license agreement, click the continue"" button.
  7. click on the button "I agree" If you agree
  8. click on the drive that Yosemite 10.10 is installed on and click on continue
  9. click on the 'Install' button (this will install the drivers for HP to your Mac)
  10. Enter your password, and then click the button 'Install Software' (if prompted)
  11. click on the "Close" button when the message "installation succeeded."

  Add a printer to print the queue
  1. open System Preferences
  2. open Printers and scanners
  3. click on the symbol ' + '.
  4. click on "Add a printer or a Scanner..." »
  5. click on "HP Envy printer 4504.
  6. click on the drop down menu to "use:" and choose "HP Envy 4504 Series."
  7. click on the ' Add ' button.

  Try to print in color.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP ENVY notebook: Headphones not detected on HP ENVY laptop

  Headset/headphones not detected by the laptop when it is inserted into the audio jack.

  tried several headphones which none were detected despite working on other devices.

  USB headset is detected.

  Have updated audio drivers using HP support Assistant and manually and not always no chance.

  Had this problem because the laptop has arrived.

  Any help much appreciated and I will try to provide all other necessary details.

  Hey @ABONKERSCHICKEN,
  
  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you are having problems with headphones not detected on HP Envy laptop. I'd be happy to help you with that.

  To begin, I would like to follow this document: computers HP - solve the headphones and headset problems

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!
  
  See you soon.

• My HP ENVY 4500 does not print

  I recently bought a HP ENVY 4500 printer I it connected wireless through e-print HP, but it does not print any PDF files or documents web page, it would only print Microsoft Office documents. I tried to manually connect via USB, but it does not print anything, it just says: queue when I check on my Active printers the print job disappears as if its been printed.

  Any help on this would be greatly appreciated.

  Hi there, I should have asked you to confirm if you try to print from a mobile device (smartphone or Tablet) or a laptop/Macbook computer.

  If it's the former, take a look at this support document covering start with ePrint to your wish of 4500

  http://support.HP.com/us-en/document/c03721293

  If it's the last one here is a link to some troubleshooting steps for issues that you may experience when you try to print wireless

  http://www.HP.com/global/us/en/wireless/troubleshooting.html

  Post back after you have reviewed the information and let me know how you get.

  Best.

• HP envy m6 (driver not found)

  Hello

  my pc is a hp envy m6-1250eb

  I had long ago my set PC upgraded to Windows 8.1, but now it seems that the drivers are not found there

  AMD Radeon hybrid blocked and USB - IF USB Host Constroller xHCI (with a yellow triangle)

  If I click o properties then watch it?

  This device does not work properly because Windows drivers required for this device could not load. (Code 31)

  {Operation failed}
  The requested operation failed.

  It seems that HP provides driver time Windows 8 and 8.1 of Windows for your computer on the page of drivers PC laptop HP ENVY m6-1250eb. If these drivers do not work, thanks for posting the "Hardware ID" Device Manager (text only String) for the missing devices or unknowns as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP ENVY notebook: battery not charging!

  Hello

  I recently bought a HP ENVY laptop, and I've updated my windows edition to Windows 10.

  2 weeks ago, I noticed that my battery no longer works. It does not load: its says "plugged in, load" but its not charging.

  now my battery is empty, (say 3%) and my laptop 'nine', which isn't that 2 months, does not come on unless it is plugged.

  You have a solution to my problem?

  PS: I tried to uninstall and reinstall the drivers of the battery from the Device Manager, but nothing happened!

  Is it a windows update problem or a battery problem, although my laptop has only 2 months?

  Thank you very much for your help!

  Hi there @Rodgee,

  Welcome to the HP support community where you can ask questions, find solutions and get help from others in the community! I wanted to join you and help! I understand that your battery will not charge on your HP ENVY laptop PC. You mentioned you tried to uninstall and reinstall the drivers and that you are not sure if this is a problem with the battery of Windows updates.

  Please make sure that the AC adapter cable is not plugged into a power strip, surge arrester, or secondary power source. It should be directly into a wall outlet.

  There are a couple of documents that you can use to try to understand where is the problem. The first one I would say is the document of the battery is not Notebook Power or hold a Charge . If your laptop battery will not hold a charge, you better follow the instructions in this document step by step to fix the battery and see if it needs to be replaced.

  You can also use the document test and calibration of the battery (Windows 8) . This will help you determine the status of your battery.

  Have you tried to use the HP Support Assistant to download drivers and updates? Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that needs updating.

  This answer doesn't solve your problem or answer your question? If so, please share the good news! Inform others that this answer was helpful by clicking on the button accept as a Solution . You can also show your appreciation by clicking thumbs-up.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the troubleshooting results and include your model number (How can I find my model number or product number?).

  Thank you!

  Have a great day!

• HP Envy 4500 will not print computer

  Hello

  My HP Envy 4500 works perfectly for some time now.  Unfortunately, it stopped printing from my Dell laptop, running Windows7. It scans to the laptop very well.  It copies fine, and it prints from my iPhone fine.

  I've reviewed a ton of messages and tried many things:

  * Uninstall/reinstall wireless (at least 8 times) - via the website https://123.hpconnected.com/activate/woobe/ENVY4500

  * Uninstall/reinstall via USB

  * ran doctor utility printing/scanning (or whatever it's called) and says it all looks very good

  sending a test with a HP tool page is fine, however, the internal test via the tool HP Print page fails

  I'm losing my mind and would be really grateful for the help.

  Thank you!

  Hey @JNZM,

  Thanks for getting back to me on this subject. Normally, I get a notification email indicating that you had replied to a post that we are working on. In this case, I never had an email, so I just found this post unanswered today. Normally I answer as soon as I come into the office. I have some more tricks up my sleeve that we can try to solve the printing problem you feel. Can I please have you follow the steps below to load another driver on your machine and test print.

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Envy 4500 and left click on printer properties.
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 6980 select the printer on the right. If Deskjet 6980 does appear to only select "Windows Update" at the bottom left and once the update is completed, you will be able to select Deskjet 6980.
  9. After selecting Deskjet 6980 hit Next to complete the wizard driver new
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your HP Envy 4500 printer
      
  13. Click OK
  14. Finally, right click on your HP Envy 4500 one more time and click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Now that the other driver has been installed, test printing from your Windows 7 computer again.

  Please let me know if this procedure works for you. Good luck!