HP Envy 5660 all-in-one: HP Envy 5660 all-in-one

Similar Questions

• HP ENVY 5660 e-all-in-one: printers

  I just bought the HP ENVY 5660 e-all-in-one printer. I have the printer connected to the wireless signal strength is excellent. Laptop is connected wirelessly with the excellent signal strength. I downloaded the o my laptop printer software. I went through the process of connecting several times (McAfee Total Protection Firewall has been disabled) and the program keeps telling me that it cannot find the printer. I set the laptop on top of the printer this process so that the connection will be closer.

  Any ideas?

  I found another option on mine. Looking in my computer control panel, I found the possibility to search for advanced print settings. My printer is connected to my laptop.

  No additional help is needed.

  Thank you

• ENVY 5660 All in One: internet access HUGE in 4 hours of printer ENVY 5660

  Hello

  I had a hard time with my brand new (3 days old) want 5660 Iin all-in-One. He had a rash of sleep/wake/restart Issus where I worked through--with little success.

  However - today I saw a HUGE increase in my use of the internet just in the last 4 hours. I installed this printer on 7/25 - use of the internet was normal on this day and on 7/26 - nothing more than my usual consumption - and I was playing around with the printer for the most part of these 2 days. Today I turned it on and within 4 hours, I had used close to a GIG and a half - usually in a day I don't use only about 250 MB (a GIG and a half is about 8 days for me).

  Everything was normal - unauthorized access to my signal, nothing extraordinary for the use - computer actually very little use at all - just this printer. Any ideas of what could be the cause? Something went wacky within the printer itself?

  I have little confidence in this printer now - and if it's really going to use all my monthly allowance of the internet (I don't have unlimited access) - I can't keep him. It is now OFF until I followed my use some time - which is not helping me to solve the other problems he has.

  Any ideas on what the question might be - something to check or disable - would be greatly appreciated.

  Thank you!

  AMT

  Hello @TNorth,

  Welcome to the HP Forums, I hope you have a pleasant experience with us!

  I understand that you have some doubts about the internet usage of your e-all-in-one printer of HP ENVY 5660. I want to help you with this.

  First, while the printer connects to the internet, none of its functions could use the amount of data you describe. So, I do not exclude the possibility of an unauthorized access to your network.

  You use the printer for ink snapshot? Otherwise, you can actually turn off the function of web services on the printer and it does not connect to internet at all (you will still be able to print good wireless).

  If you want to keep the web services that are running, try to disable the feature of automatic update for your printer:

  1. Drag to the left on the printer homescreen and select Setup.
  2. Select printer Maintenance.
  3. Select update from the printer.
  4. Make sure that the Automatic printer updates is set to OFF.

  If you still have problems with the printer after these steps, I recommend to contact our telephone support of HP Cloud Services at 1-855-785-2777.

  I hope this helps!

  

• Printe all-in-one HP Envy 5660: obtaining a black page when I try to copy a document.

  Tried to copy a document. Obtaining a black page. Print preview displays also a black page. Full black ink cartridge. Tried to unplug the unit. No change. Any suggestions?  Thank you.

  Hey @JaneDeere ,

  The semi Full Reset is a complete programming on your printer reset. It resets everything on your printer, not only the wireless. Unfortunately, this reset is our last resort. Because the issue is still produced the last step would be the printer to service.

  I recommend at this point, contacting the Technical Support queue by phone to explore additional options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the steps that we have done and the results of these measures.

  It has been a pleasure to work with you. I wish you good luck going forward with this! :)

• 5660 envy all-in-one: computer screen is disabled when you set up the connection Wireless new want 5660 on iPad.

  No error message or facilities.

  I started with setup assistant device and the iPad first wireless configuration. The installation program appears to proceed normally but then computer monitor went black. Cannot access the computer somehow. Finally, unplugged the computer, restarted and began again using the Setup Wizard first configuration wireless PC. PC installation is completed without incident and I have been able to operate printer iPad and computer. Still some features not fully understood, but maybe enlightenment will come. Thank you for your interest in my problem; Keep up the good work.

• 5660 HP all-in-one: envy 5660 is not stay up very long. I have to disconnect and reconnect.

  Printer shows wireless light and the screen of the printer is black.  I want to print something, and the print status indicates that the printer is not ready.  Sometimes I can hit just the power on / off button and the screen lights up and the printer picks up my document and print it.  However, most of the time I have to unplug the unit to get a response from him.  Once he returned to the top of printing begins.

  That is right. The router is losing the IP address.

• HP Envy 7645 e-all-in-one-seri: screen scanning / Scan to computer / select a computer

  The screen scanning / Scan to computer / select computer

  "Select computer" shows a computer that no longer exists... How can I remove the computer? Before getting rid of the computer, the printer software has been uninstalled.

  Hello there! Welcome to the forums @SandyLY 

  I read on the way in which you no longer have a certain computer, however, the printer it still lists as a detection option of.

  1. I'd say trying to power cycle the network devices first, which can remove this PC in the list of printers:
  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer.

  Check the printer to see if the PC you have more is always listed or not.

  2. If the PC is still listed on the printer, check out this guide to set up the scan of the computer to the correct computer:

  A "found no computer', 'Necessary connection' or 'unsuccessful analysis" Message appears for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e - all-in - One Printer Series

  Good luck, I hope this helps

• HP Envy all in one PC: Recovery Manager, the system restore is disabled by a virus

  Had a virus on my all in one PC envy after a free update to windows 10. Computer has been closing down could not get antivirus to work fast enough. After reboot system had disappeared. There is now no operating system. HP Envy Recovery manager, System Recovery is not highlighted, do not not the possibility to do a restore? Virus stronger than I've ever met. Thank you in advance.

  NIP

  Hello;
  
  Let me welcome you on the HP forums!
  
  It would NOT in fact the virus which prevents HP Recovery Manager to work.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work: http://h30434.www3.hp.com/t5/Desktop-Video-Display-and-Touch/HP-Recovery-Manager-Blocked-After-Windows-10-Upgrade/td-p/5170752

  What you would really need to do, is to erase the entire disk and restore your PC using something known as HP recovery media.

  HP recovery media is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs. You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update". If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  If you have difficulties to find a phone number, then try: 1 (800) 474-6836
  
  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• HP ENVY bow 27-k119 TouchSmart all-in-One desktop PC

  Hello. I have

  HP ENVY tilted 27-k119 TouchSmart all-in-One desktop PC, after the upgrade to windows 10 I have no audio, I tried to download beat audio SUPPORT HP, without success. Can someone help me. Thank you

  Hello

  No support Windows 10 from his homepage. Please try the following driver for Windows 8.1:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64642.exe

  Kind regards.

• Internal speakers on my HP ENVY TouchSmart all-in-One desktop PC 23-d027c no longer works

  Hello

  I just bought my HP ENVY 23-d027c TouchSmart all-in-One PC of office a few days ago.  It was working fine until I tested the speakers.  When you watch youtube videos, the internal speakers will stop working, while the mute button is not enabled.  It takes a few minutes, and then the speakers work again, only to cut out once more.  IT IS SO FRUSTRATING!  What's weirder, I put a dvd to see if it was the speakers, but the audio on the dvd seems to work very well.  Also, when I use headphones, the speakers work fine.  I don't know what the deal is, but according to my research, this seems to be a fairly common phenomenon on HP computers.  I'm struggling on the Exchange on this computer.  IF this isn't a simple solution, this machine will return to the store!

  Help, please!

  Thank you in advance!

  Wayne

  Hello MakCo,

  Your speakers are not working correctly.

  Go to Device Manager, uninstall the IDT audio and restart the computer.

  Uninstall it and reinstall the audio driver.

  Here is a link to the Device Manager.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes

  Nice day.

• HP Envy all-in-one curve: HP Envy curve in a single 34 "stops just have no idea what is wrong

  So yesterday, not for a long time I was doing / play music on my Hp Envy curve all in one Pc and my mom came and sat next to me and then she let out, but at the point where she was in the kitchen, it just stops randomly with our any type of warning, I don't think that she walk on the power cord I have no course at all, but it is possible so I went to unplug then plug it in to the top cause it does not turn on when I press the power button when I plug to the top she flashed black but the Orange button was not always the same color blue as it suppose to be so I did a bunch of time trying to turn it on , but does not it didn't work so I tried another way before he could flash I turn on the light turns blue can also here that the fan and fill the stream of him but he turns off power then black light flash if I want to sleep in the morning time problem still purists the case so I search something on google and saw that dust could stop working during overall of Suite causes more heard about it, but that is not possible I have a fan at the top but not always it cool so I took part found only a dust not big thing to stop it or fire finger nail, I just finished to put it back together I hope that me and my mother would think that he would return but it didn't at all I made sure that everything is plug properly within the the computer or damage, but I rarely someone let close because I don't want to be too bad there, but only a cord at the back of the power supply cord I can't go wrong plugin which up to I guess. I'm sorry for this long paragraph of madness, but I guess that try to givanyone all the information you need to help me with this problem so I can get back to what I do. THX YOUNGNOOKBEATS

  Thank you for the update. That you are having problems with it, switch on/off, in step 3 of this document, you can select the section that best describes what is happening. If there is something to the step you can not do, then you move to the next thing listed in this process, you can do.

  If you are getting nothing, can not enter the BIOS to do some tests of material, and there is no sign of any change, then at the end of the document it tells you to contact HP support by using this link, http://www.hp.com/contacthp, fill in the form, create a folder for your question, and then use the information to communicate with H phone support.

• Want to 4500 all-in-one: Envy 4500 scanner on the internet

  At home, I have a HP Envy 4500 all-in-one printer / scanner. I can the documents sent by e-mail to hpepint and that works very well.

  But I'm at work in another city and you want to scan a document located on the 4500 feel like at home.

  Is it possible to scan a document on the internet?

  My phone app it won't unless it is connected to the same WiFi network as the printer.

  Ric

  Hello

  IAM afraid to said that the analysis can be done on the internet.

  The Mobile/PC device should be on the same network for the scan to occur.

• HP Envy 4500 All in one Printer

  Hello, I have a HP Envy 4500 all in one printer that is only a year and have had many problems with.  Recently, when I turn it on, it displays an error code; 0XB3F4F4F8. I have not found what means this error code. ? I tried to unplug and then turn on to get the Welcome screen, then it said error code and does NOT stop automatically. I have to unplug it to stop it. Any help would be greatly appreciated!

  Hi!, jenwad87:

  Refer to the HP printer... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/document/c00489814

  Please, contact with the help of HP, of... http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/troubleshooting

• 8.1 Windows Pro update the problem (from Windows 8 Pro) on Envy 23 TouchSmart all-in-One...

  Hello

  I have a HP Envy 23 Touchsmart all-in-one that I bought a year ago (12/2012). It comes preinstalled with Windows 8.

  System information:

  (a) Intel (r) Core i7 - 3770 S CPU @ 3.10 GHz

  (b) 8192 MB of RAM

  A few weeks after that I had bought the system, I've upgraded to Windows 8 Pro with Media Center that I bought through Microsoft upgrade program.

  Last week (19/10/2013), I saw the option upgrade to Windows 8. 1 in the store and decided to upgrade.

  After a few minutes, I got a prompt asking me to restart the computer, and I did.

  However, I noticed that the screen has turned white, but it restarts not really - I have seen that the hard drive light was still flashing and I waited for about 15 minutes. I know it does not restart because if that were the case I would have seen the HP logo on the screen of the BIOS. A little later, the system entered into mode 'sleep' (at least the light blinked slowly as if it was the sleep). As it was late at night, I decided to leave the system alone and decided to check on it the next morning. The next morning, he was still in mode 'sleep' (as I feared) - when I tried to wake up from her sleep by moving the mouse/hit the return key, he did the exact sounds as if he were to wake up from its sleep (as it always does), but the screen is still blank. The light power button lit up constantly indicating he's awake now.

  At this point, I decided to turn off the system by holding the button for a few seconds. To restart, I saw the HP logo on the BIOS boot screen and the screen went white and nothing came.

  So I decided do a system recovery using my Windows 8 recovery CD and turn off the system with the CD in its niche. This time, the system came and began immediately to restore my OS to a previous version.

  After connecting to the system recovered, I received the following message:

  "Could not update for Windows 8.1.

  Sorry, we could not complete the update Windows 8.1. We have restored the previous version of Windows on this computer.

  0xC1900101 - 0 x 40019.

  I tried to reinstall Windows 8.1 a couple of times after that. Once to disable all non-Microsoft services and disabling all startup programs. Always the same result.

  I have no antivirus software on my other system protection of Microsoft default system software.

  Any help, greatly appreciated.

  Thank you.

  I have disabled active secure boot existing starter and the update worked.  Now we get the error of watermark "secure boot not configured correctly.  But I have re-enabled secure boot and the error disappeared.

• HP Envy: Envy of HP 4520 all-in-one and Windows 10

  Hi team!

  We purchased through amazon.de 4520 Envy HP all-in-one. Just tried to install and connect wirelessly to my HP Pavilion G6. Our laptop was free update Windows 10 about 6 months, he has also kindly invited by HP.

  The installation of the HP Envy disc says it works with Windows 10. But the message from the HP site, says - it has not been tested with Windows 10 and they will not be drivers for Windows 10!

  Please, help me and advise me - what I have to do, how to connect the two devices, the laptop can't find the all-in-one device? The test reports of test results wireless network went ok, no problems found. However, the printer is not finding by the laptop.

  Alternatively, can I go back to my old version of Windows? How?

  If I can't do anything, I would have to return the unit...

  Kind regards

  mirakirova

  Hello
  
  Thank you for using the HP Forums.
  
  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4520-all-in-one-printer-series/5447920/model/5447921#Z7_3054ICK0K8UDA0AQC11TA930C7
  
  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!