HP Envy 6z-1000 screen and bezel problem

Similar Questions

• Satellite L650-1EQ - black screen and overheating problems

  Hello

  I have a problem with my laptop Satellite L650-1EQ.
  A few days ago my laptop was overheated quite often.
  I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.

  I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!

  I didn't know what happened and was very scared.
  I turned off the computer.

  The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.

  I turned on the computer and tried to start it again, and the computer started fine.
  The image appeared and the problems disappeared.
  But I knew that something bad was about to come so I took the laptop computer repair technician.

  I told her what happened.
  He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.

  I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s

  I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.

  I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s

  Please help me, thank you!

  PS: I'm sorry for my English, I know that's not the best

  Hello

  This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.

  You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
  But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(

  Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.

• New hard drive, installed Windows XP PRO version 2002 - resolution screen and internet problems

  My Dell has had some problems (patially due to age), so a buddy of mine and I put a new hard drive in it and then installed windows XP Pro.  Installation went great, but now that it's installed, I can not get the screen resoultion to change and I can't connect to the internet.  I feel like with the internet, can I have a driver problem.  I know that the internet works, I'm on it with the laptop right now.  Any suggestions?

  ????  I'm not sure I understand your question. You download the drivers to a place, you will find them, as the office. If you want to put them on a USB stick, copy the files downloaded to the key and take it to the computer target. Copy the files on the computer desktop. Double-click on a file and it will unpack the installation routine starts. Follow the installation wizard. Reset when said to repeat as needed until all the drivers, etc are installed. Subsequently, you can delete the downloaded files from Dell (from installation .exe). MS - MVP - Elephant Boy computers - don't panic!

• 9800 torch Touch Screen and Trackpad problem

  Our application adds buttons only on devices that support the touch screen.

  The reason why we do this is because if you have a selected item in a list field and press the getSelectedIndex returns the correct index on a touchscreen.

  Add this button on a trackpad/trackball device would not work properly because you can't the selected list box item and then click the button. You need to scroll this button first, the getSelectedIndex in this case would be the first clue or the last index according to the place where the button.

  If anyone has a solution or suggestions please post. I'll also post updates and a solution if I find one.

  We had the same problem when we added a toolbar style touch the foot of some screens that contains a list field.

  Our solution: vertical movement of pointer changes the selection of the list, while the horizontal movement jumps down to the toolbar, but leave the current selection in the list where it is.

  May not work for your particular application, but seems to be accepted in our.

• Start white screen and other problems

  I don't know what exactly caused this do. I turned on my computer as usual, but instead of start normally, the computer showed the tutorial screen that you see when you start your computer for the first time.
  When I went, I found that all applications on my startup screen have disappeared, the only thing that came with a result when you use the search tool is Google Chrome. More of this, I am unable to access or change the settings for my PC, create new folders, etc. (the drop down just 'empty' bed) or pin programs to my taskbar. My desktop items also have this box little pop up next to them when I hover over them.
  I started my computer in safe mode, but the problem still persists.
  Help would be greatly appreciated.

  Brilliant Hello,

  Thank you for the update on the issue.

  According to the result of the scan SFC that he managed to find some damaged files, but could not fix some of them, it means that there is a corruption with your system files. To go further and to repair system files, so I suggest you run the DISM commands and see the are able to repair system files.

  Maintenance of the images of deployment and management (DISM) installs, uninstalls, configures, and updates features and CBS packages in Standard Windows 8 Embedded images (standard 8) offline and offline Windows Preinstallation Environment (Windows PE) 4.0 images. The commands and options that are available for servicing an image depending on whether the image is offline or online. All controls operate on a standard 8 offline image. Subsets of commands are available for the maintenance of an operating system.

  I suggest you run the commands in elevated command prompt and control below if this can help.

  • Press Windows key and X at the same time.
  • Choose line (Admin) command on the shortcut menu.
  • In the command prompt, type the following command and press ENTER:

  DISM / Online/Cleanup-Image /ScanHealth.

  This command is used to check if an image is repairable. Scan the image to check corruption. This operation may take several minutes.

  DISM / Online/Cleanup-Image /RestoreHealth

  This command is used to repair an image.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Satellite Pro P100 - screen and sound problems after upgrade to Windows 7

  Hi all

  I got my Satellite Pro P100 (model number is PSPAEE-00C006EN and the second digit of the serial number is '7') upgraded from Vista to Windows 7, and since then, some bugs seem to have had place - can someone help me on the following:

  -L' screen DIMS increments, irrespective of the fact that I have saved my power settings to stay on FULL (battery or sector)

  -No sound. Once or twice, the sound card worked and settings to say this works correctly (and you can see the movement of the graphic equalizer).
  In terms of PC knowledge, I would be 5/10 (so not a dummy, but certainly not a pro! and we tried a lot of the more obvious things)

  Thank you all

  Hello

  1.) if the screen dim option doesn't properly work, I recommend you to reinstall Toshiba Value added Package. This package controls these functions, the keys FN and others. Visit the Toshiba page for an update!

  2.) did you check if the sound is muted if the equalizer work? In addition you can also try to update the audio driver might it work ;)

• the home of Windows 7 Desktop with touch screen and the problem is "not authentic."

  I have a windows 7, but lately its been said that is not true and that I have a counterfeit. A person or an HP agent will be able to help me or guide me in this process of solving this problem?

  According to Microsoft, Windows activation is valid during the initial Setup.  If you change the device, it can falter, because it will do a periodic test.

  (1) if I have activated Windows, why is Windows on my computer not authentic?

  Genuine Windows is a recurring process that checks your product key to ensure that it is used with the material, he has been associated during activation. If the product key appears as not authentic or not valid, it is likely that the product key is used on another computer or is a counterfeit.

  (2) I need to activate Windows after making a hardware change?

  Perhaps. When you make a significant hardware change to your computer, such as upgrading the hard disk and memory at the same time, you may be required to activate Windows again. For more information, see Activate Windows 7 on this computer.

• Toshiba Libretto L5 / 80 - driver screen and battery problem

  Hello

  I have reinstall my Toshiba Libretto L5 / 80, unfortunately one have no CD with driver and after instalation, the system cannot detect display driver (I can see only 800 x 600 resolution, not a 1280 x 600 is a driver ATI Mobility Radeon-M but clasics ati site cannot be installed) and pilot battery (I can't see the battery info do not know a type of a battery). I can't find the drivers on the toshiba site, please, if anyone knows where can I download it, or better, if someone send me driver on mail ([email protected]), I will be very happy. THX for any answer.

  Petr

  Hello

  I thought that most of the Toshiba laptop models are known to me, but now I'm completely confused when I saw the picture of this beauty. ;)
  Where you bought this laptop?

  As you can see this laptop model is not listed on the support page of Toshiba Europe. Is it perhaps an Asian model? Maybe in the United States?

• vCenter 5.5 | In case of disaster, lost database tries to upgrade, vCenter blue screen and now problems with vCenter rebuilt.

  There was a bug in vCenter 5.5 (go figure) where he tried to access a file in "C:\users" for some strange reason, she refused to install/configure SSO.  It took hours of VMWare support to force it to install by copying files autour in hand, trying to get the installer to recognize the file she needed to 'C\users '.

  Now, I have vCenter 5.5, with a new database and service WebClient is not configured correctly.  On the page where it asks to run under a local system account or a domain account, I've specified a domain account.  Well, the field is not the name of the server so I knocked on the server.local domain name FULL instead of the server's FULL domain name.  Now when I visit the URL of the web service client it says it cannot connect to vCenter he's trying to access the domain.local not server.domain.local.

  VMWare support tells me I have vCenter UNINSTALL and reinstall to fix.  This is ridiculous.  They try to tell me there is no other way to change this setting.  Are you kidding me?

  Ideas of the community?  VMWare help was very helpless in front of this whole situation.

  Thank you

  Cody

  It turns out that this error during installation is created by the presence of one! my user name.  Support said they will include a fix for this in a future release.  They also said the errors generated during installation could be ignored.  Everything seems not to work regardless of errors generated during the installation process (simple installation).

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• General hardware problems NB200-125 (screen and HD)

  Hi all

  NB200-125 my wife is around the age of 18 months and in the last few weeks will expose some strange problems. He started with a boot failier where unable to start windows XP, after trying to boot into normal mode and safe mode, a few times I tried to plug it to make sure it wasn't a battery problem, plug it helped and I managed to get it started and ran chkdisk who found a bunch of disk errors hard that it sets, and it is now ok start a few files have been lost, but it might just be chkdisk removal from areas of the HD.

  Now in the past 2 days we got 2 times where the screen is spent "in white" first to a black screen, then the second time for a green screen.

  Someone at - it for directions to know where to look to fix it? I thought that it would be the sort to change the HD until these errors to the screen.

  Any ideas would be very appreciated.

  Hi Grunge,

  Of course, these problems can be hardware related but before I ask an authorized service provider you should try a recovery facility to the factory settings. Maybe Windows was confused to the top because of the previous problems so a reinstall would be useful.

  In order to take the way to recovery, and boot from it. Follow the instructions on the screen and restore the box settings.

  If still doesn't help really hardware related issue and it can be fixed to an authorized service provider.

• 23 - d160qd envy: new motherboard, now empty screen and 6 beeps. Cannot change the legacy BIOS. Help!

  Good ladies and Gentlemenof the Interwebulars, I hope someone can shed some light on my situation.

  Walked down one day to see that my computer would not start. A diagnosis which in a bad power port. Got a new motherboard because after desoldering (or that's what I tried to do) I realized that it was small to (re) welding in and I could not find the right part to reorganize.

  so I got a new motherboard. The number replacement part direct. Barefoot on my floor wood and ESD wrsitband on, I put in this bad boy. Double and triple check things and connections. Go to hit the power button and I get 6 beeps and 6 flashes of correspopnding of the powerbutton. The system does not appear to be on, fan is running with the other sounds of starting and running sounds, but I have a white screen and orange electric button. If I tap CTRL + ALT + DELETE it will restart and begin the process again. The 6 beeps by HP standards denotes missing graphics / card error. My original motherboard had a built-in graphics card so I thought that the same new part number card mother too. Obviously not. so I had a Geforce 2Go MXM graphics card update with heat sink. Barefoot, wood floor, bracelet ESD, thermal paste and turn it on to hear... SIX BEEPS AND SCREEN WHITE.

  After Googling around, some people say that I have to enter the BIOS and change boot legacy and fashion out of the UEFI mode that's killing me right now. I have join and would completely if I could see my screen of the BIOS, or anything for that matter. I can not go back also to my other card because it will not feed. So my question; How to make or change the BIOS settings so that my computer will recognize a graphics card or internal graphic that should be on the new motherboard itself so that it starts?

  I need this computer for CAD work soon so I thought help processor i7, 8GBs RAM, Geforce card and touch screen to perform a generation of PC.  So if someone has a great idea they would projected upward on this post, I'd appreciate it. Thank you!

  Your computer is not posting, sound rather give an error message in the form of 6 beeps and red LED flashing, indicating graphics / video issue.

  You can never get into the BIOS of the device, if its not posting, not on a HP Desktop atleast.

  I recommend, you disconnect all components and fittings connected to the motherboard i.e. cables SATA, power cables, RAM, processor, heatsink, power supply and battery CMOS as well.

  Now, press and hold button power unit for a minute or two., with the power and everything is still disconnected.

  Then,.

  (1) Insert the battery CMOS back into its slot, install the processor and the heat sink, connect all cables power that goes to the motherbaord in the PSU and CPU and etc., less SATA cable and cable power to drive hard and Optcal drive and turn on the device, of course after you have connected the rear power cable.

  (2) check if the machine beeps and check whether it is 5 times.

  (3) If yes install a memory in the first slot (slot black), connect the monitor and turn on the power and check if there is no video output.

  (4) if so, connect the return which is always disconncted, to their respective locations and ports and turn them the unit on and get on with your CAD stuff.

  IF NO,

  2 options:

  (1) if the unit is still under warranty, call 1800-474-6836 and have a technician on-site visit your place and replace the parts needed for the operational unit.

  (2) or the motherboard you purchased could have been Dead On Arrival. Get a warranty replacement for the DOA mobo and re install a new Board of Directors.

  Good luck!

  Please click on the "congratulations, Thumbs Up" at the bottom of this post if you want to say 'Thank you' for helping!
  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution.

• I get a blue error screen, and I suspect that it is a driver problem.

  Original title: can someone look at my mini dump file?

  I get a blue error screen, and I suspect that it is a driver problem. I can however point out from the dump file. Can anyone help? I have the latest file in my documents in Windows Live folder.

  Thank you.

  You have a fatal hardware error:

  Bug Check 0 x 124: WHEA_UNCORRECTABLE_ERROR

  This bug check indicates that a fatal hardware error occurred

  Record ID: 01cb520eaf797705
  Severity: Fatal (1)
  Length: 928
  Creator: Microsoft
  Notify the Type: Machine Check Exception
  Timestamp: 09-12-2010 0:09:00
  Flags: 0x00000002 PreviousError

  ===============================================================================
  Section 0: Generic processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4838
  Article @ fffffa80060b4910
  Shift: 344
  Length: 192
  Flags: 0 x 00000001 primary
  Gravity: Fatal

  Proc. Type: x 86 / x 64
  All Instr. : x 64
  Error type: BUS error
  Operation: generic
  Flags: 0x00
  Level: 0
  CPU version: 0x000000000001067a
  Processor ID: 0 x 0000000000000000

  ===============================================================================
  Section 1: x 86 / x 64 specific to the processor
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b4880
  Article @ fffffa80060b49d0
  Shift: 536
  Length: 128
  Flags: 0x00000000
  Gravity: Fatal

  Local APIC Id: 0 x 0000000000000000
  CPU Id: 7 a 06 01 00 00 08 00 04 - bd e3 08 0c ff fb eb bf
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
  00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

  Proc. Info @ fffffa80060b49d0 0

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80060b48c8
  Article @ fffffa80060b4a50
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Bank of Proc 0 0)

  Update the BIOS, check that the CPU temperature is not too high. If this does not work, replace the CPU.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  I have a View Sonic LCD 24 inch flat screen and it has a blue tint, how can I solve this problem?

  Hello

  He got this 1 day, or has it just begun?

  If it was always this way, it could be a manufacturing defect or your advanced display settings may be incorrect. The latter can be determined according to the settings/Advanced/display/personalization in the control panel settings. See Customization here, it varies depending on the manufacturer, but you focus on controls that adjust color output.

  If it has started, then it is possible the monitor had a malfunction. I put another monitor (if available) on the system. If the problem persists, then the fault is in the video card or display drivers. If it disappears, then the monitor can go wrong (you can try to adjust the settings on the screen itself to see if it has no effect). If it turns out to be the graphics card, I would like to firstly download and install a new set of drivers for the graphics card or the manufacturer of the system (the best for download, then uninstall the current set restart and install the new download).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org