HP envy h8-1455 Hyper-V

Similar Questions

• IPMMB-FM F_Panel connectors of a HP ENVY H8-1455

  I just bought your desktop to nine HP ENVY h8-1455.  It is a gift for my nephew I needed to open the folder of the power upgrade, muscle RAM and replace his case badly with a default model much more easy to use (the Antec three hundred two ATX case).

  The motherboard is an IPMMB-FM (Formosa) manufactured by Pegatron.  I tried searching online for a manual or just an image of the correct alignment of the connectors for this motherboard, but nothing useful so far.

  My concern/problem is what is the correct placement for all the F_Panel connectors to the motherboard in the case?  The front case Panel includes the following connectors of rider: Power SW, Reset SW, Power LED and power LED + and LED T.O.D..  The old connector HP case was just a big adapter nine with the last tenth pinhole filled in on the connector.

  Antec site directed me to '' consult the manual of your motherboard for specific pin header locations. ''  Now, I could do that in a blink of an eye, but neither the documentation provided by HP in the box or their Web site has been successful so far.  So I hope that someone else has the answer I need.

  Thanks in advance.

  The following diagram must be the list of the pins on the motherboard;

  

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP envy h8 1455 power upgrade

  does anyone know what PSU 600 watts that fits my pc.i have talked with hp support they offered only the 460 watt I already have & no store does since any help.the psu cooling fan blows to the back of my pc.oh just in case my pc is hp envy h8 1455 office pc.thanks in advance for any input.

  Update, thanks to 2 guys who tried to help.i have installed the thermaltake & pc works well so far. Fan face down over my video card, but it sucks air, not beaten down like the saleswoman (airflow is very well) I realized the heat had 8 pins 12 volts connect has been able to use 4 of them with no problems. Next project will be updated in about 3 months of graphics card, so I try to get help for this. Thank you all

• HP envy h8-1455 quadro 600

  I am unable to get a Quadro 600 PCI-e to work with my desire to hp h8-1455. When I install the card I get 3 long beeps and the computer turns off.

  I tried two different cards, so I know that the problem is with the computer.

  Is there a reason that this card would not be supported?

  Thank you!

  Again, here's the specifications of your desktop HP ENVY h8-1455. And again, please consult this document from HP on the "parameters of the BIOS for the motherboard Formosa" appearing in your computer. It may be necessary to enable 'Secure Boot' and 'Legacy Support' in the BIOS to enable your 600 Quadro work with your computer. Windows 8 and the UEFI BIOS required can complicate the installation of graphics cards and other devices.

• Envy h8-1455: HP not scan my product

  I'm trying to find a Broadcom driver.  I can not install HP Support Assistant (get a job pending, waiting for a response).  If I try to have HP scan my product (after you have entered my model #), I get the following error message.  Does anyone have an explanation for that?  Thank you.

  HP has encountered an error when trying to analyze your product.

  Please verify that your product is turned on and connected, and then try again in a few minutes.

  Alternatively, display all drivers available for your product below.

  Poncho113, welcome to the forum.

  HP is not all drivers Win 10 available at this time.  Your best option is to run updates of Windows and HP.  This will ensure that your software and drivers are up to date.  Also, here is a guide to common Solutions to win 10.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Installation of the Windows 8 driver

  I have a new HP ENVY h8 1455 computer running Windows 8. My all-in-one HP J4680 appears in the control panel that need troubleshooting - in need of a driver. I downloaded the installer of Windows 8 features full driver. When you run it I get a prompt of Windows 8: ' do you want the following program to make changes to your computer? Yes, the dialog box disappears, and then apparently, nothing happens. I get no installation procedure, no Wizard, nothing. The status of the device in the Control Panel does not change.

  If anyone else has experienced this? Does anyone have any suggestions?

  Interesting, Joe, what you say, you can not install the printer right now. For more information you connect the printer wireless via USB or with an Ethernet cable?

  If you install with a USB cord and that you have connected the computer before installing the software then you have probably installed on accident the Plug and Play of MS and not full of HP drivers. I would make sure that if that happened that you remove these drivers as completely as possible from the computer after disconnecting the USB cable. Then, follow the link and install the drivers full features:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109973-1&cc=us&DLC=en&LC=en&OS=4132&product=3692888&sw_lang=

  Let me know if this helps solve your problem!

• HP ENVY M6-1106er: Windows 8 Pro hang up to begin after adding Hyper-V role

  Hello.

  Have a problem with HP ENVY M6-1106er

  After the OEM Win8 upgrade to the Pro version, I added the Hyper-V role for my system and restart the laptop.

  After the restart boot OS freezes on the screen with the HP logo and rotating circles.

  If I disable AMD Virtualization in the BIOS - system starts, but the hypervisor does not work.

  With virtualization enabled in the system BIOS will not start with the Hyper-V role installed.

  Help, please.

  Hello Sir,

  Here's what you need to do.

  1. enter in the BIOS setup and define virtualization as being disabled and reboot the system.

  2. after starting windows 8, enter the control panel and remove the bluetooth driver.

  3. download and install Ralink Bluetooth driver 9.2.101.10 version (SP59632)

  4. restart the system and reactivate the virtualization technology.

  I hope this helps.

• ENVY of HP dv7 - 7243cl run HYPER-V?

  Support for HP ENVY dv7 - 7243cl of SLAT for HYPER-V?

  It supports the COVERSLIP. It must be enabled in the BIOS.

• HP Envy Phoenix 810-130QE Causes of Hyper-V hangs at startup

  I'm having a problem with the help of Hyper-V on my new computer and after that try almost everything has suggested two on these forums and on a myriad of web search I'v could not solve the problem, so I hope someone might be able to help out me.

  I found the setting in the BIOS to enable hardware virtualization and walks.  After that, the system would start fine.

  I then went to programs and features (WIN - X), then "Featurs Turn Windows turn on or off" and permits to Hyper-V and all it's subcomponents as seen in the following screenshot...

  

  That's where I ran questions.  After the reboot, the computer hangs at the HP logo with the loading circle spinning and will spend.  I even went so far as to turn all night without success.

  Everything I bought this computer is because I need to work with the development of Windows Phone and run emulators requiring Hyper-v and this feature was not available on my Core2 Duo aging system.

  I tried using other versions of the Bluetooth driver that was mentioned in the forums without success.

  I tried to disable Secure Boot, again mentioned in these forums with no luck.

  I am out of options and I am desperate to get this problem resolved.

  For now I have disabled hardware virtualization in the BIOS that allows me to start, but of course the features of Hyper-V that were installed earlier didn't work so I'm no better off than when I started.  Any attempt to reactivate the hardware virtualization in the BIOS leaves me hanging at the start of the HP logo screen.

  Any help would be greatly appreciated.

  I was finally able to get Hyper-V works fine on my HP ENVY Phoenix 810-103QE by installing a new copy of Windows 8.1, the upgrade to Pro and then reinstall all the drivers except the Bluetooth drivers.  The installation was not the restore partition but was using a retail DVD Pro Windows 8.1.

  Any attempt whatsoever to install the Bluetooth drivers that either before I had Hyper-V running or after have resulted in a failure.  In the case of installing them before you have a Hyper-V running it will expose the shot to the startup problem.  In the case to install after having Hyper-v running would cause an accident immideate and dump during installation.

  It seems to me that we have to wait until Microsoft, HP, or Bluetooth chip provider (in my case it is Ralink - now MediaTek) release updated drivers, firmware or software battery Bluetooth for solve the problem entirely.  Because I don't care about Bluetooth on my desktop PC is not that big of a deal for me, but it may be a deal breaker for others.

  If anyone is interested, I can provide more details about the installation process or answer any questions you may have about how I went to do it.

• How to do in the BIOS on my HP Envy running Windows 8.1 to enable Hyper-v

  How to do in the BIOS on my HP Envy running Windows 8.1 to enable Hyper-v

  Thanks for the reply old_geekster.  I understood what I needed for my HP Envy and who had to press F10 at startup, not ESC.  Once I press F10 fast during the start I in the Boot Manager and has managed to 'Turn on' virtualization, which is what I need to activate "Hyper-V" in the operating system, which then allows me to use Microsoft and VMWare virtualization.

• NO Hyper-V, Windows 8.1 no upgrade on Envy 700-130

  Just got a new Evny 700-130 with 8 GB of RAM and immediately improved to 8.1 Windows.

  Then I went the Windwos function dialog like the one below, to activate the Hyper-V technology, but on my system, it is not yet listed. I have confirmed that virtualization is enabled in the BIOS, but just can't find Hyper-v in Windows.

  

  Hi Lambert_Heenan,

  The following prerequisites must be performed successfully Client Hyper-V on Windows 8.1:

  • Windows 8 Pro or Enterprise 64 - bit operating system (Applies to Windows 8.1 also)?
  • 64-bit processor with second level address translation (SLAT) x
  • 4 GB of RAM minimum system x
  • Hardware support for virtualization at BIOS level x

  You run Win 8.1 Pro?

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo" If the notice is relevant or "Accept as Solution" If your problem has been resolved.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++
  H8 1380 t CTO, Intel i7 3820
  16 GB OF DDR3 MEMORY
  Pegatron Motherboard-IPIWB-PB (Pittsburgh), Radeon HD 7570 1 GB. Win 7 Home Premium set to upgrade to Windows Pro 8.1.

  Want Phoenix 810-150se, Intel i7 4820 k
  16 GB OF DDR3 MEMORY
  Pittsburgh2 motherboard, NVIDIA GTX 645 - 2 GB GDDR5. Win Pro 8.1.

  HP 560z CTO AMD Phenom II X 6 1090 t.
  16 GB OF DDR3 MEMORY.
  Radeon HD 6570
  Win 7 Home Premium set to upgrade to Windows 7 Pro.

  HP ENVY 17 t-j000 CTO Quad Edition laptop. I7 4702mq
  12 GB OF DDR3 MEMORY
  NVIDIA graphics
  Win 8 Pro

• Enable Hyper-Threading on HP ENVY 700-030qe

  I have difficulties to find the option in the system bios & utility setup on my windows 8.1 pro 64-bit system

  

  It doesn't seem to be an option to display unlike the picture, I got from HP support, which seems to be another version of the Setup utility

  

  what I am doing wrong?

  Hello

  Press F10 (computer configuration) after turning on the PC.

  Look under the headings of security--> security system

  

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• HP Envy 700-529: hypervisor does not not on HP Envy 700-529

  Need to get virtualization running on my HP Envy 700 - 529 (bought on sale at BestBuy.ca) running Windows 10.  Have successfully installed all the object (I think), but get the following error when I try to commit to Hyper-v:

  https://www.dropbox.com/s/maf1w3mzbjzzz3d/screenshot%202015-10-23%2012.06.08.PNG?DL=0

  Error message reads as follows:

  "{VMID}" was able to start.
  
  Virtual machine "{VMID}" could not be started because the hypervisor is not running.
  ...

  .. .and the message continues.

  Can anyone offer any assistance?  Update the chipset using the downloaded from the section "Software and Drivers" http://support.hp.com site seems not had any effect (although I don't quite know I use it correctly).

  Any help appreciated!

  
  Ross is a .NET software developer, currently working as a consultant for the Government of Canada in Ottawa - the Canada national capital.

  Hello

  You will need boot into the BIOS and change the following default setting is disable.

  

  Thanks for posting on the forum.

• 23 - d030 looking for hardware virtualization assisted in the bios configurations envy

  Office all-in - One HP Envy TouchSmart 23-d030

  WIN8 Pro 64 bit (improved win8)
  BIOS: LA3_810.ROM 8.10

  I need to enable "hardware assisted virtualization" in the bios, but there is no parameters (that I can find) to do. Yes, I went through the security settings in the bios. I ran MS CoreInfo.exe and the computer is good for the VHA and LATTE. DEP is good as well (checked via Control Panel............ System properties). Hyper-V is enabled in the operating system. Is there some 'hidden' attributes that I don't see in the bios?

  FYI the point of this is that I'm trying to get phone win8 emulator to run.

  Thanks for any input.

  Thanks for the reply and the problem lies, I only have the setting for Vtx/Vtd, who is disabled because it must be determined in accordance with the documentation of MS (in my case). I don't have the DEP setting. Now just for S & G I activated the setting and guess what... the phone emulator worked! Maybe in the bios I have they rolled up a number of things in a setting, I can only guess. But it does not work so I'll close this. Thanks for the help.