HP ENVY m4: SOUND

Similar Questions

• 32 envy: no sound on HP Envy 32 via mini DisplayPort to DisplayPort cable on Mac mini

  I recently bought a HP Envy 32 monitor and hooked it up to my Mac mini using a mini DisplayPort (i.e. Thunderbolt) DisplayPort cable. The video works fine @ 2560 x 1440, but I have no sound. The output sound in references to system preferences "the selected device has no output settings" for the 32 envy. The sound works fine when I use a HDMI cable, but then, the resolution is limited to 1080 p. The Mac mini is a mid 2011 model, which is able to transfer the audio via DisplayPort, SAA as far as I know. Any suggestion on how to solve this problem?

  Figured out how to get mini-displayport audio to work with the HP Monitor (I have a Macbook Air)

  In addition to choosing the HP monitor HP ENVY 32 audio in the PREFERENCES SYSTEM-> SOUND->-> OUTPUT

  An adjustment should also be made to the AUDIO and MIDI CONFIGURATION.  You can either do a search for it in the finder, or it is in APPLICATIONS-> UTILITIES-> setting up Audio and MIDI

  1. Open the app
  2. In the left menu, select DisplayPort
  3. Format of... Replace with 48000,0 Hz 2-channel 24-bit wide

  Once changed, you should be playing audio from your monitor.

  Good luck.

• HP Envy: The sound of my laptop got soft/quiet

  Sounds Windows 10 HP Envy my laptop got very soft and I could barely hear anything. It was't like that yesterday, I already tried to disable the audio improvements and nothing happened. Help, please!

  Hello

  Try the following.

  Download the Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72117.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72105.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter.  Hold button power supply for 20 seconds, then release it.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Envy: No sound after upgrade to HP

  I did all the updates that HP had in the meantime for my desire and lost sound from my PC.

  I have ten updated drivers and it did not fix the problem.

  I was able to restore before the updates & sound returns.

  Why is happening...?  This kind of questions is a nightmare for us customers... and

  makes me wish I sent the laptop to the store... but alas, now it's too late to go back.

  I'm afraid to update my PC because of this.

  Please notify.

  Product # M1W07UA #ABA

  Hello

  Your computer is a HP ENVY m7-n101dx.  Please download and install the driver Audio Realtek High definition (HD) next Windows 10:

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74867.exe

  Kind regards.

• m6-1178ea audio HP envy beats sound fluctuations and low windows 8.1 (no compatible drivers)

  Hello

  I have a laptop hp envy beats audio m6-1178ea. everything worked great until I upgraded to (forcibly) to windows 8.1. Since then, the audio has reduced in quality, power. The control panel with EQ does nothing. Small changes with the sidebar on the left, but in general the sound is it good and really low. When I plugin speakers or earphones, it's even worse, the quality declines more, the sound comes only out really low and flat, no bass and also varies a lot. (for example when I plugin the speakers for 1 second the sound is good and strong, and then he goes down and fluctuate). I have lived many forums like this one, I used the latest drivers (which are more than a year), I used the default windows drivers that disables audio beats, still nothing.

  All solutions? Microsoft, HP will lead to a solution and the correct drivers?

  Hello @fivos_,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about how there is an audio issue with your laptop after upgrade to Windows 8.1, and I'd be happy to help you!

  As you said, the drivers for your computer and available software indicate that there is no compatible driver for your system. You can choose to reload Windows 8 on your system and configure your Windows updates to allow only certain updates to the installation. This document should help to upgrade your system to Windows 8.

  I hope this helps!

  Concerning

• HP Envy: No sound system after that I upgraded to window 10 and reset my laptop (HP envy)

  Hello

  I don't have any audio system after that I have reset my laptop and restored my personal files.  In the computer system, it showed that I have not IDT High Definition Audio CODEC cannot install or find the driver software online (with a yellow sign).  Can you please give me a solution to fix and if not on IDT, please provide me with any other information to fix it.

  Here are my product information

  HP envy window 10 (updated)

  Processor: AMD A10 - 5750 M APU with graphics HD Radeon (TM) 2.50 GHz

  Installed memory (RAM live): 12.0 GB (11.2 GBusable)

  Type of system: operating system 64-bit, x 64-based processor

  Pen and touch: Support full touch Windows with 10 Points of contact

  I hope this information helps you understand what wrong with my sound system.

  Thank you!

  Hello:

  Please see if this audio driver works.  He says it's for W8.1 and W10.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• HP Envy Touch: Sound only works for about 1 hour after I restart. Then suddenly stops.

  Product: HP ENVY Sleekbook 4 t-1000 CTO

  Model: KD1A99UA #ABA

  Operating system: Windows 7

  When I restart my computer, my sound works for an hour or two and then suddenyl turns off. It does this with or without a helmet. It works again as soon as I restart the computer, but I would really do not have to restart my computer every hour just to get the sound to work.

  Also-download of Windows 8 is not an option because a large part of my work is incompatiable with windows 8

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  If the pesists of the problem, right click on the speaker icon in the taskbar, then select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• 800-002-a Phoenix envy: no sound on the desktop computer running Windows 10

  The Bureau uses the built-in IDT High Definition Audio Codec 92HD68E2 and there is no audio output from the headphone plug at the top of the ports page e/s or one of the two audio ports - speaker audio or audio line-out. I tested the speakers and the headphone on other devices and they work perfectly, so either making detection doesn't have or the problem is deeper than that.

  I tried without success to the following:

  1. Uninstall and reinstall the audio codec;
  2. Uninstall and remove the audio codec, then download and put it back in place.
  3. Open the sound control panel on the taskbar to see what shows on the Read tab - that is to say:
  • The speakers/headphones and headset Communication going from "not connected" to "ready" when headphones are connected to the headphone jack high. No sound in the headset
  • There is no change in the display when the speakers are connected to the audio ports.

  The only sound I get is a second monitor with internal speakers connected by a DVI cable. The problem may be related to the upgrade of the OS from Windows 8.1 to 10 but I can't be certain that I have not really tried to listen to audio files from the upgrade. Any help I can get would be most appreciated.

  Hello:

  See if the audio driver IDT W10 works for you...

  This package provides the Tempo IDT High Definition Audio Driver for assumption of office models that are running a supported operating system.

  File name: sp71717.exe

  If the driver above does not either, there is workaround that you can try to get at least the noise at work...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. Select IDT High Definition Audio CODEC under this category.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  A warning message may appear, but click Yes.

  7 Windows has updated your driver software.

  8 restart the PC.

  The key is step 6.

• H8-1414 office envy: no sound

  Sound has stopped working.

  Worked very well for weeks after the upgrade to Windows 10.

  I deleted the device in the device driver deletion Manager. Added.

  No sound rear connector or jack before (helmet). Have tested with multiple speakers and headphones.

  Have a monitor with Display Port that sounds and that works very well.

  Default audio device activated, that's fine.

  Its Board of Directors would be bad? It is in the motherboard?

  Any ideas?

  Thanks in advance.

  Hello:

  There is no audio driver W10 on your PC support page.

  Have you tried the W8.1 driver?  If this isn't the case, that give a try.  Install and restart the PC.

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp63932.exe

• ENVY DV7 sound has stopped working! If I reset it comes back for a little bit.

  Computer is a year old. Windows 8. If I reset the computer the sound lights as long as im using, but the second I walk and return its judgment and does not work. Help!

  Hello

  Check if the following makes a difference.

  Do a right-click the speaker icon in the taskbar, and select playback devices.  Right click 'Speakers and headphones' (or speakers/HP), and then select Properties.  Select the Advanced tab, and then remove the check box "allow applications to take exclusive control of this device."  Click apply and then click Ok to save this change.

  Restart the laptop.

  Kind regards

  DP - K

• E5H53AA #ABU - HP Envy - No sound

  I have today received this monitor, but cannot get sound.  I checked the technical details and it comes with built-in speakers and beatsaudio.  No sound via the headphones don't jack either.  Help, please!

  Have you made sure the drivers are up to date?

  Control Panel > hardware and sound > devices and printers

  Look for your device. If your computer can see this as, double-click on, go to the Hardware tab, click on properties and get the drivers tab. Click on "update driver".

  Here is the hp document on this issue for other troubleshooting ideas.  http://support.HP.com/us-en/document/c01289551

• HP ENVY 15 sound will not work

  I just got my computer today and the sound will not work.  The ssound is completely up and not muted. Help, please

  Hi rf668309,

  Please visit the below mentioned link to fix the problem:

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01884922

  If the problem persists, you may need to contact the computer manufacturer to resolve any hardware problem.

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Envy 4502: sound of scwealing loads envy 4502.

  My inkjet 4520 want make a load high height howl or skweek noise when the cover is lifted up and it's lid which exposes the ink cartridges, not scan cover and the same when you start to print and the printer starts at startup.

  Hi @NiteLife,

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• IDT AUDIO DRIVER DOES NOT...

  Hello

  YESTERDAY I FORMET MY LAPTOP (HP ENVY 15 3017TX). AFTER I "INSTALLED HIGHT-DEFINATION (HD) AUDIO DRIVER IDT.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5215...

  But after installing sound MUTE...

  so please give me another link sound driver or solve this problam.

  Hello

  I did it using this link

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-envy-15-sound-stopped-working-suddenly/TD-p/2728079

  Problam is in default of choice of the speaker. Sound automatically choose default wireless speakers, I changed and choose 'high speaker 3 defination' as a default. Now it's working.

  But thx for your tips.

  DARKNULL

• Can I record my portable room dialogue?

  Please, let me know if I can record with my laptop HP ENVY dv6 sounds/voice room, thanks in advance

  Hello

  1. There are many free sounds around Editor software, you can try:

  http://www.free-sound-editor.com/

  2. I have not tried to record sound with a phone but many DVRs around are very good. Please check the following news:

  http://digital-voice-recorder-review.TopTenReviews.com/

  Kind regards.