ENVY DV7 sound has stopped working! If I reset it comes back for a little bit.

Similar Questions

• My sound will stop working. And don't come back unless I restart the program that the sound came from. Windows & Home Premium.

  This started happening about 10 hours ago. I'm a gamer and I relayed a lot on my sound.

  When I join a game or do something that requires his IE (Youtube, Ventrillo, games) My sound worked for a set of 5 seconds, then cut.

  Ventrillo will freeze after that I lose sound and all the other games if I close and reopen them that happens the same thing, there sound for seconds then nothing.

  I tried updating my drivers and all this so far.

  I am running Windows 7 Home Premium.

  Update. I moved where my headset is plugged in, that it seems to work for some reason any. His strange yet but do not know if this is a permanent solution.

• J6480 HP: Duplexer J6480 HP has stopped working. Tab device settings comes back to the Duplex NOT INSTALLED unit.

  I rebooted the HP software on my Windows 7 PC.  As a result, device tab shows duplexer settings still NOT INSTALLED no matter what I do.  Before the PC software reload duplex printing worked perfectly.

  Hey @mjmorse00,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the all-in-one printer Officejet J6480 after reinstaling on your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If the printer is connected to the printer via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for any other icon of your printer listed.
  7. If you removed the USB cable, connect.
  8. Click on add printer and select your printer from the list.
  9. On the screen that asks you to select a driver for your printer, find the driver for Deskjet 9800.
  10. Continue adding a print to your printer queue.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows Service host process has stopped working... online and are looking for a solution

  I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

  I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

  Click on Start and open the Control Panel
  Click on System and select Advanced system settings in the left menu.
  Under performance, click settings.
  Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
  The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
  Select the check box next to the program that you want to turn off DEP for and then click OK.
  Restart the PC and use the IE32 again
  Note: You can not set DEP to 64 bit IE

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Adobe Photoshop CC 2015.5 has stopped working when I (click on the question for more details)

  When I open photoshop and then I click on new and I press ok and then he said: this message? Adobe Photoshop CC 2015.5 has stopped working.

  You are able to access the preferences? (Edition > Preferences (PC) - Photoshop > Preferences (Mac))

  If so, in the general tab, click Reset preferences on exit, then close and relaunch Photoshop.

• HDMI sound has stopped working - dv9266ea

  Hey!

  I have a laptop dv9266ea with WinVista Home Premium and a few 1-2 months ago my sound does not work as it should. We used to be able to plug the laptop to our TV using a HDMI cable and change the sound default and everything was good, but now we have not any sound at all more. Photo is excellent as usual.

  Are more people who has the same problem, so it might be because of some update somewhere here? Or anyone knows of another solution?

  Never mind. Swedish support couldn't give me an answer. American support couldn't give me an answer. 2 times I had the mother exchanged at just 1.5 years (the last time they destroyed the volume controls and said that they didn't fix it for me, even if they one wrecked at HP), and my brother had his mother traded 3 times on a similar model.

  HP seems to suck. I'm going to buy a new laptop to mark another in a few weeks and then it goes in the trash. I lost the way a lot of time and money because of all it's flaws and time away for repair.

  Solution: Trash and get another brand.

  Message edited by LordMagnus on 02/06/2009 12:38 AM

• HP envy 15-j185nr: HP envy 15 SimplePass has stopped working

  I recently came across a problem with my original wireless card, you have the card replaced and now links to the internet fine, but when I was in the process or to find the problem, I used the restore option that uninstalls programs and saves files, but essentially restores the computer to factory default.

  My HP SimplePass stopped working after I did, and when I try to reinstall it, it is impossible to recognize that my laptop has a fingerprint reader.

  My product number is E324UA #ABA and model number 15-j185nr, hope that this is enough to find what is the question.

  Try the version: 8.01.11 - May 4, 2014

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66143.exe

  or

  version: 8.00.57 - November 13, 2013 - I recommend

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64339.exe

  Also the update:

  Fingerprint reader driver:

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

• Sound has stopped working Windows 7

  I have Windows 7 Home Premium on an ASUS x 64 laptop with Realtek HD Audio Manager. My audio has suddenly stopped working. Realtek HD speakers are listed as the audio device by default, but when I test them I get an error message "could not play the test tone. It makes no difference if I plugged headphones. I tried to update the software of the Realtek driver, but he told me that I already have the latest version of the software installed.

  Hi Joey,

  Thanks for posting your query on the Microsoft Community.

  I wish to inform you that it is possible that it is possible to install the Audio Related back drivers. See the link below for more information:

  http://www.Realtek.com.tw/downloads/

  You can also check out the link below for more information:

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-isn ' t-work correctly

  Hope that answers your request and let us know if you need more assistance. We will be happy to help.

• HP Envy 5530: HP Envy 5530 billboard has stopped working

  My 5 month old HP Envy 5530 e - all-in - one control/display is no longer display for print/copy/scan options.  It is empty when the power is on and turns "off" after that the printer is turned on for a few minutes.  This occurred immediately after I installed a new black ink cartridge, as it is shown on the display.  I was able to print a test page for my laptop wireless and the printer works properly.  I checked the function of the printer for troubleshooted and driver and software updates.  Once again, all are installed correctly and working properly.  I turned off the printer for an hour before you turn it back on, but it does not solve the problem.

  Hi @amm0716,

  I'd love to help you with your 5530 envy. I realize, according to your description, that the disply panel just doesn't work and it already has, but I wonder, you have the printer connected directly to a wall outlet or is a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  I know that you said you turned off the printer for about an hour, but have you tried a hard reset?

  To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  By clicking on the thumbs upwards below helps to show me that you are grateful for my efforts if despite our efforts the screen continues to not work, I suggest that we call. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  HP printers usually have a warranty of 1 year from the date of purchase, you can check the warranty using the following if you wish; guarantee cheque.

  Good luck!

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• Sound has stopped working after the installation of the new system of cooling for cpu

  I recently installed a Corsair H55 liquid cooling device that works successfully, but after starting my computer, the sound does not work. I checked the sound Manager, and it says that my speakers are not connected (which they are). I plugged them properly with the plug in the light-green connector. I tried to plug in the façade that does not work either. Other speakers and the headset will not work too well on either front or back. The sound Manager will not confirm that anything is plugged and it wont let me click on anything to set it up. Is it possible that I have damaged the sound card and damaged the box of the connector on the motherboard? I tried a lot of things without success. Help, please!

  My system specs are:

  64-bit operating system

  Windows 7

  Hi xsammyx101,

  Refer to the help article and check if that helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  If the problem persists, I suggest you to contact the manufacturer because it seems like the hardware problem.

• "Host process for windows has stopped working". It will then come my computer change Classic theme and eventually everything just stops and I have to restart my computer.

  Product

  Host process for Windows Services

  Problem

  Stopped working

  Date

  04/08/2010 17:28

  Status

  Solution available

  Signature of the problem

  Additional information about the problem

  Bucket ID: 1288359239

  Problem event name: APPCRASH

  Application name: svchost.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918b 89

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18005

  Timestamp of Module error: 49e03821

  Exception code: c000071b

  Exception offset: 000888f5

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: 0e02

  More information 2: b21b56b606e7544720668ce364087082

  3 more information: 0e02

  Additional information 4: b21b56b606e7544720668ce364087082

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Sound has stopped working, except with Skype

  Hi all.

  Suddenly, my sound from the internet (YouTube, etc.) and Windows Media Player doesn't work. All diagnoses show that everything is fine. The only time where the sound work is when someone calls me or I call someone on Skype, but only after I take the call or the other party doesn't - I hear the rings on incoming or outgoing calls.

  Any help would be greatly appreciated.

  Thank you.

  Igor

  Hello

  1 did you software/hardware changes to your computer before this problem?
  2. what exactly happens when you try to play a media file on windows media player? It display any error message or just play the multimedia file without sound?

  Try these steps, one by one, and look for the question.

  Step 1: Since the question has recently started I suggest you to perform system restore on your computer.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  Step 2: If you are still having the same problem then, check if the problem persists in the clean boot state.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Step 3: Also, look for the Red or yellow bangs in Device Manager and send back the same.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Sound has stopped working

  You do not have a sound device installed on your computer error ID = 0xC00D11BA, Condition ID = 0x00000000

  Hi Philip, this problem could be solved on ways to couple

  1. simple would be first to a hard reset.

  which means that you turn off your computer, completely remove the codes of power connected to the computer and make sure that there is not food at all, once you have confirmed there is no power input

  Press the power button on your computer for 30 seconds

  This process eliminates the problems caused by the temporary memory and power glitches,

  2. If the above has not resolved the problem, you can try to execute this file automated by Microsoft which will detect any possible licensing and you provide a resolution

  Run the fixit tool mentioned in the link below and check if that can help diagnose the problem.

  http://support.Microsoft.com/GP/NO_SOUND

  3. another Option, you can try is to uninstall the driver of sound card in Device Manager and restart your computer for the driver to map its install automatically