HP Officejet Pro 8500 use on network home

Similar Questions

• OfficeJet Pro 8500 scan to network folder number

  I followed all the steps to configure my network scan folder.  I made a folder, I have activated the SMB share, I added the file to the shared folders, I input as requested evrything, when I press on save and test, it gives an error that the computer must be turned on.  I don't know what to do, please help.

  Network path: Mac Mini\Users\JAWA\Documents\Printer Mac de RIVERA \\ALEJANDRO scans

  user name: ALEJANDRO RIVERA

  Password: *.

  Hello

  It seems that the name of the computer doesn't really work in this scenario.

  I used the IP address instead (you can find your Mac IP in the network system preferences pane) and everything worked.

  In addition, you don't have to write the full local path to your shared folder, such as/Users/JAWA /...

  Just write the name of the file just after the IP address.

  Here is an example of my work:

  \\192.168.1.2\FaxInbox

• hp officejet pro 8500 a - Wireless Network Setup Error Message premium

  I have my printer connected to my desktop via USB, and print very well. I want to connect the printer to the network wirelessly to other computers can ePrint. However, whenever I want to initaite the wireless configuration wizard, I get the following error message: wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  @khalidalkalla, please check your private message Inbox.

• OfficeJet Pro 8500 wireless (A909g) cannot print to network on windows computers folder 8

  I have an Officejet Pro 8500 A909g on a home wireless network with three windows computers.  Recently upgraded to the Vista computer and the computer from Windows 7 to Windows 8.  Still, the third computer is Windows XP.  The updates were 'clean' (started from scratch) and the latest full version of Windows 8 Hp driver has been installed.  Everything seems to work fine, except that I can't "scan to network folder" on both machines to Windows 8!  I can scan a file from the Hp Solution Center Console and it works fine, but it's too much pain to go through all the steps.  I use "scan to network folder" a LOT, so it is a problem.  The scan to network folder continues to operate correctly on the XP machine.

  To clarify what's happening - Scan kind of works network folder: he finds the file, scans the document and saves it in the folder.  But the size of the file is zero and it is unreadable.

  I called the Hp support by phone and was happy to have very positive support, and they don't charge me even though I was out of warranty.  The technician spent almost an hour of research on the issue, running either through every test possible and to discuss with her supervisor.  In the end, she said that there must be something wrong with my computer.  I think they just ran out of options.

  I am convinced that there is a compatibility issue with Windows 8.  If so, admit it and don't running me in circles more Computer Configuration controls do.

  A related problem: I downloaded the app "Hp Scan and Capture" of Windows 8 and it works at all.  Could not find even the officejet 8500, although this model is listed as a "supported device" so that the app on the Hp website.

  Unfortunately this printer is not on the list of printers supported for this application. Unfortunately, this printer has been made too long before programming has been written so that it can be retro-compatible.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/Windows-8-app-HP-scan-and-capture/TD-p/1826665

  I hope that information is what you are looking for!

• HP OfficeJet Pro 8500 a: configuration Error Scan to folder of network using El Capitan

  I have a HP OfficeJet Pro 8500 has in one and a MBP OSX El Capitan running.  I would like to install my scanner so that it can save to a folder on my computer.  I have a folder on my shared computer named HPSCANS with permissions so that everyone can write to it.

  

  Using the built-in Web server I tried to set up a network of installation folder but keep receiving an error.  I've included screenshots below.

  

  

  

  

  

  What I am doing wrong?

  Of course, click on the link below:

  Stay connected with updates from HP

• HP Officejet Pro 8500 has more: I need help to setup windows fax and scan on a network wireless home

  I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.

  Hello

  Windows Fax and Scan allow scanning from Windows, fax of the printer can be done by the HP Officejet Pro 8500 A910 software or Print Fax - printer HP Officejet Pro 8500 A910.

  Windows Fax and Scan to allow fax when your PC is equipped with a fax modem that you can find below:

  http://Windows.Microsoft.com/en-us/Windows/set-computer-send-receive-faxes#1TC=Windows-7

  Follow page 58 of the user guide below to send a fax from your computer using the HP device all in one:

  http://h10032.www1.HP.com/CTG/manual/c02668142

  To receive faxes on your PC follow the section "to set up fax to PC (Windows)" on page 69 of the instructions.

  Kind regards

  Shlomi

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Cannot install Officejet Pro 8500 A910 on the network in my laptop Windows XP

  
  

  Resolved, not resolved.

  I talked to HP technical support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the home edition) when networked through a router. It will install via USB. I uninstalled the program and reinstalled with only USB connected to clear all printer/scanner of network information. Product support claimed it would install through an ether net cable connected between the printer and the computer, but it does little good if you need internet access.

• Install an Officejet Pro 8500 on a CABLE network A909

  Okay guys - I'm out of resources - especially since it is PC my wives - and - until yesterday, it was working fine. AND - it works very well on MY PC. I already uninstalled suite ESET Virus - as I thought that may have caused the issue - but - it is still not install.

  Add a device - Officejet Pro 8500 A909 Series is now on the desktop.

  When I run

  I click on "Connect to the network via a Wired Ethernet connection".

  Click "next".

  It finds the network printer.

  I pointed out the printer - and click on "next".

  I can see it - and a few more that I can't capture:

  Checking network connection Intel(r) 82578DC Gigabit adapter settings...

  Starting the network services...

  Looking for MY978410JH...

  Looking for a hardware address (MAC) of 0025b39bae11...

  Checking the network topology...

  Starting the network services...

  Send request SLP to 192.168.1.3.

  Checking network connection Intel(r) 82578DC Gigabit adapter settings...

  It fails every time.

  Any ideas?

  Thank you!

  Hello

  PNP is plug-and-play.

  There is a setting in the two ESET and within the interface of web more router wireless called UPnP which means universal plug-and-play.

  Universal Plug and Play (UPnP) support devices, such as computers and Internet devices, access the network and to connect to other devices, as required. UPnP devices can automatically detect the services of other UPnP devices on the network.

  UPnP can be enabled or disabled for the automatic configuration. The default setting for UPnP is enabled. If disabled, the router won't allow any device automatically control the resources, such as (mapping), the router port forwarding.

  Are the Plug n ' play. Services function Discovery Provider Host and Function Discovery Resource Publication enabled in OS PC of your wife?  Type services.msc in the start search box, and then select Services. Take a look at and make sure they are started.

  What is the brand and model of your wireless router? My Netgear router shows me a picture of the devices attached (with the names and IP addresses) to the network. I have a Linksys router that also does this.

  Reinstall ESET, but turn off the firewall while you set up the printer. Once it is set up, turn on the firewall and switch mode in advanced settings of the firewall of learning.

  Reinstall the printer as a network printer but only install base driver. You can install the software after that it works again.

  Simple USB installation. Plug the USB connector between the printer and the other of the PCs. software Install... test the printer on the PC it is installed on and then open Printers and devices and right-click the printer icon, select properties and select the sharing tab. sharing the printer and assign permissions. Now on the other PC search for the printer.  As long as the PC is attached to is activated, it can be used by a pc. This is the argument that you won't if the RJ45 network connection is used.

  Kind regards
  ERICO

• My HP OfficeJet Pro 8500 A910 cannot locate my network computer that you want to scan.

  My HP OfficeJet Pro 8500 A910 runs on Windows XP, wired network.  It allows to print from my desktop workstation, however, the printer will not locate my computer workstation for scanning.  I can't find any way to enable the analysis of the it function on the shortcuts the scanning HP or an HP printer connection.  I rebooted both my workstation and the printer, but still no connection for scanning.  Printing works fine.

  Hi hhcubed,

  You will need to open the stock Scanner Solution Center and then click on enable the Scan to computer

  

• Can't scan on HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar?

  How scan you on an HP Officejet Pro 8500 has e-all-in-One Printer series - A910 using Cougar? Whenever I try, I get the following message:

  Error message: Scanner reported an error - unable to open a session on the device.

  Hi Irossga,

  This document explains how to use the built-in features to your operating system to scan photos and documents.

   

• The network file scanned Documents (PDF or JPG) = 0 (OfficeJet Pro 8500 has 910 bytes

  I have OfficeJet Pro 8500 910 has connected to the wired network with domain

  I created a shared network folder with read access to my computer (operating system windows 8 Pro X 64) through IP address of printer

  http://10.181.XX.xxx

  The shared folder has appeared on the screen officeJet and test with success, when I wear analysis on the officejet, the digitized file appeared on the network folder but with of size 0 bytes and does not open even it is pdf or jpg

  I have same door on the other computer is windows 7 PRo X 64 spouse for the same field and scanned documents open succefuly.

  Help, please

  My problem was solved by updating the HP 8500 has the latest firmware

  Thanks for trying to help me

• I'm getting a vertical line in the middle of the page when I use the ADF on my Officejet Pro 8500 a but

  HP Officejet Pro 8500

  Windows XP

  No error message

  No changes to the system

  Scan using the ADF puts a vertical line in the middle of the scanned page.  This does not happen when I scan from the flat screen

  Brian, this is going to be a pretty easy fix. What you're going to need to get is a lint cloth (as a microfibre cloth or a filter coffee) and get just a wet touch. Then, open the top of your printer to reveal the glass. There are two sections, one large, and that is a thin strip of glass on the left side. If the line makes its appearance in the ADF scans/copies only - clean this thin section with a moist, lint cloth.

  This should help you!

  More information here: https://www.youtube.com/watch?v=SPdwUKnrDgM

  Let me know and have a great day!

• Scan in color using an Officejet Pro 8500 has?

  Hello

  I (try) to use a HP Officejet Pro 8500 a scan in color to a macbook (OS 10.6.8).

  Currently, I am only able to scan in grayscale using the cable or the touchpad with the program. I checked the settings and I don't see an option to change this. Anyone able to help me with this?

  Thanks in advance.

  Hello

  Can you use the front panel of the unit to run a scan PDF?

  If so, please try the steps below and do it me know any changes:

  1 open the HP utility and select your device.
  2. based on Scan Settings open "shortcuts Scan Manager.
  3 select the affected shortcut - save as PDF - and click on change... (or double-click on the shortcut).
  4. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  5. in the expanded menu now, open the drop-down next to the Mode
  6. now select the color option, and then click OK to save the changes. The next scanned using this workflow is displayed in color.

  If the problem continues without change, please specify what software used to scan.

  Kind regards

  Shlomi