HP Pavilion DV6000 HDD self-test error Fail #1-04

Similar Questions

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• The hardware diagnostic tool advises that the SMART short self-test has failed.

  The hardware diagnostic tool advises that the SMART short self-test has failed.

  Is this a problem? What can I do about it?

  Atelier42 wrote: the hardware diagnostic tool advises that SMART short self test failed.

  Is this a problem? What can I do about it?

  Hello Atelier42, this usually indicates that you have a hard disk failure.

  I would like to back up my data as soon as possible, just in case the hard drive breaks down actually.

  You must also make sure that you have the HP Recovery restore set for your system recovery disc in case you do not want to replace the hard drive.

  With this restore HP Recovery disk set, you could replace a defective hard drive and use this disk set to your HP system back as it was when shipped. Then, you could put your data saved on your system.

• HDD self-test - Fail #1-04

  Hello
  I have Pavilion dv9000 series (dv9040eu), all of a sudden, I get the BSOD with impossible to mount the volume message, so I run disk hard test, which returned: # Fail 1-04

  What does this error mean?

  is there a place where I can read the explanations of the error associated with the HARD drive self test?

  I tried running chkdsk/r, but it keep saying "an unspecified error has occurred", also, I managed to get the most important files, with "BartPe" and "GetDataBack".

  Starting recovery console also causes the BSOD with message unmountable_boot_image...

  Any suggestions?

  Many thanks in advance...

  Message edited by sourpuss on 05/01/2009 08:39

  No, a car will be empty, but if you their Envoy the laptop and then they put the reader, they may then be able to do that, but I expect it to be cheaper to just order the recovery DVDs too and DIY.  Because the discs cost a lot of HP, I recommend only the recovery DVD from them and purchase the disc elsewhere.

• What are the answers of code of HD521-2W SMART short self-test error when running the diagnostics?

  1 HP Pavilion a4310f, product # AY014AA-ABA, software Build A1NAv6PrA1

  2. Microsoft Windows 7 Home Premium (64-bit) Edition

  3 a receipt the "Failed SMART short self-test HD521-2W" when executing Hardware Diagnostic tools.  Error message:

  Error message the device reported the following State: the previous self-test completed having the read element of the test failed. 01/12/2012-06:21:01

  The first LBA value failure Error Message is 440642933 and the failure occurred after that the device was working since 7943 hours under tension.

  01/12/2012-06:21:01

  4. I made no changes to my system for over a month.

  Device: Hard disk WDC WD64 00AAKS-65A7B SCSI Disk Device, the revision of the firmware 01.03B01

  This unit is my hard drive (it is in factory with partitions C: and D: {Factory Image})

  Hello

  The Smart error code would indicate that the hard disk is running out and must be replaced.  If you want a guide on this, let me know.

  Kind regards

  DP - K

• PCI-5922 self-test error-223431

  I try to reset PCI-5922 OR MAX and get the error code 80040383:

  "There was a problem of resetting the device."

  Then I try the automatic test of NOR-MAX and get the State Code:-223431

  "The self test failed.

  State code:-223431

  Internal software error has occurred in the extended software. Please contact National Instruments. »

  I have tried following th:

  1. reboot the computer

  2. Uninstall and reinstall OR-Scope 15.1.1

  3. change of PCI slot

  After a few tries it turns out that the problem was in the computer. When it is installed in a different computer, the PCI-5922 worked properly.

  Now, it seems obvious: when troubleshooting

  1.) install the Board in another computer

  2.) install another identical sign (if you have one) in computer suspiciuous

  Yonathan

• help with short self test error hd 521 - 2w

  How to fix ERROR CODE HD 521 - 2W FROM PC DOCTOR PLATEAU SHORT TEST?

  This means that the hard drive has failed.  Save it now, while you still can, then replace and restore the backup.

• PCI-6224-88302 during the self-test error code

  Hello

  I'm having a problem with the auto test my card PCI-6224 in my computer. I am able to run 2 different tables successfully on 2 different computers, but this computer is that it seems to give me trouble.

  When I open NI MAX to run the test, it gives me a code error-88302 and explains the problem with the connection. I have tried unplugging the DAQ for my circuit and rerun the test but got the same error.

  How can - I have worse to pull this problem to take my next steps to solve this?

  Thank you

  Brandon Deal

  Yes, at this point, it sounds like a software on this particular calculation problem - most likely a problem with DAQmx. What version of currently installed DAQmx? When you try the first troubleshooting steps that I recommended, don't you just fixed DAQmx or upgrade to the latest version of the driver? If you just fixed your existing installation, you can try upgrading to DAQmx 9.8 instead. You can download DAQmx 9.8 from the link below.

  NOR-DAQmx 9.8

  http://www.NI.com/download/NI-DAQmx-9.8/4297/en/

  Alternatively, you can try to reset the MAX configuration data. It is rare for this to happen, the MAX configuration database may be damaged, which may cause sytem problem as you can see. Follow the steps outlined in the document below to reset configuration data.

  What is the process to reset the MAX Database?

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  At this point, it is probably just a matter of identifying what software is defective/corrupted and repair/reinstall. You can continue to try to do for this machine, or if you have another machine of work available, you can switch to this computer - depending on what is most convenient for you.

  Kind regards

• myDAQ new installation self-test fails 88705

  "' Problem: NEITHER myDAQ"myDAQ1"- Measurement & Automation Explorer-online devices and Interfaces-online OR myDAQ" myDAQ1 "-online self-test does not work. The error message is "the self-test. has failed. -88705 the specified device is missing... »

  My environment:

  8.1 Windows 64 bit running under Oracle VirtualBox Version 4.3.20 running Mac OS x on a MacBook Pro 2012 10.10.1. I have no prior exposure to work with myDAQ, LabView, or any tool of NOR.

  I downloaded NIELVIS1400_downloader.exe for Windows 8.1 to ni.com and it is finished.

  During installation I secured guarded against the problems of Win8FastStartup by stopping and restarting the PC when asked.

  After the installation when I plugged it physically in the myDAQ device, it was recognized by Windows 8.1 because Device Manager has the 'data acquisition' entries under which "NEITHER myDAQ" appears. For NEITHER myDAQ device status is 'this device is functioning.

  When the myDAQ was physically connected, the window "NI ELVISmx Instrument Launcher" popped up. I clicked on the icon 'How to set up your hardware' and the 'get started Guide... "pop up. I checked the blue LED on the device came and it is stable on. I went to "2. Paragraph confirms the recognition of the devices"in implementing on the way, guide and follow the instructions to start the automatic test. There not as described above.

  I noticed similar problems have been reported in the past. Closest to my problem reported by flex11 on 05/05/2014. Reading through I don't see any resolution itself. Another similar problem was solved by manually starting the service 'NOR device charger '. In my case, this service is already running. "NO license server" is the only service stopped, but I guess that's normal for myDAQ.

  I don't have any other product OR installed on the PC.

  I'm sure there is a simple solution to this problem, but I'm afraid it's escape. I'd appreciate any help I can get through this forum.

  Thanks for getting back to me. Your answer gave me stamina I had to move forward.

  I installed http://www.ni.com/download/ni-daqmx-14.2/5046/en/ and finally managed to do work. The exact boot sequence I need is:

  (1) delete myDAQ by USB port and then start Windows 8.1 under VirtualBox.

  (2) after that Windows 8.1 will appear, fix myDAQ on a USB port. If a pop-up window appears asking you to respond, ignore (at the beginning I did not ignore it and myDAQ transformed into a charger USB device firmware such as reported by Device Manager).

  (3) at this stage most likely "VirtualBox VM features-online USB Devices" drop-down menu shows "National Instruments NI myDAQ [0003]" as an entry but without a check mark to the left of the name. Bring the cursor to the left of the name and click here. You should now see a check mark there.

  (4) my myDAQ Self tests started working.

  However, I need the functionality provided by ELVIS as well. So I uninstalled http://www.ni.com/download/ni-daqmx-14.2/5046/en/ and installed from NI ELVISmx 14.0. My boot sequence that I have reported above, didn't work. Just at the moment it's just happened that Oracle has released Version 4.22 of VirtualBox that I wanted to try and ELVIS started to run. I can now use myDAQ DMM.

  One thing that contributed to my problems is fruitless attempts to uninstall the software OR. Unsuccessful uninstalls leave garbage behind who can or cannot cause problems in subsequent relocations. In one case, I'm done with the nidevldu (OR charger) service stuck in the system. I had to do a reset Windows 8.1 recovery operation to get rid of him. I decided to restart Windows 8.1 before uninstalling the software. This ensures that there is nothing in the limbo that past can interfere with a successful uninstallation.

• HP Pavilion a1740n HDD likely? problem

  I use desktop HP Pavilion a1740n with vista 32 bit

  Windows does not start when I turn on, instead, I get a window to start recovery.

  I ran everyday for 3 startup recovery, nothing happened.

  I ran today HP Diagnostics in the recovery menu (F11).

  All memory tests, passed with the exception of shoort SMART self-test, it failed.

  The C drive is listed in the start menu.

  Is this a hard failure?

  If it's a failure, what is the remedy (easy to please)

  Thank you

  A short self-test S.M.A.R.T. failure, you hear the hard drive has failed or is about to fail. You will need to replace the disk with a new 320 GB or a larger capacity hard drive. You use your HP Recovery discs to restore your computer to a factory State. If you create your personal series of HP recovery discs, please order a set of third-party ComputerSurgeons.com

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.

  Hello guys

  I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»

  Can someone help please...

  Regarads
  

  khanisar

  Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.

  Bev.

• PCI-1588 fails the self-test and reports error-50550

  I install the drivers for my card NI PCI-1588 and I get the following error:

  The device of that test has failed. From the device driver error report is as follows:

  Error-50550 occurred at the self-test

  Now, I normally don't get angry when I see a mistake, but when the error code is undocumented I said, why?

  In any case, my event viewer says:

  LabVIEW information: error: 400 'Bad Request' for 'deletetree', file ' ': unsupported protocol.

  [nitsuu] [[NO-Sync]]  Fatal error:.\source\nitsu\service\tDriverInitializer.cpp:80 - an error is causing this device OR Sync to the failed to initialize, error-50550 code

  Has anyone else seen this error?

  I'll try to change the location in which my PCI card has been installed, but I would appreciate some debugging info.

  Thank you

  The self-test would occasionally fail my last update... after reinstallation of windows and the only solution I've found that never fails is to go to Device Manager, uninstall the device from there (do not delete the source files for the driver), and then rescan immediately a new material.

  Then it would work in data acquisition!

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• Pavilion p6330f PC: SMART Test: SMART short Self Test FAILED

  I had so many problems with this computer. Whenever I have turn it off then go turn back will go to Recovery Manager. I did run the computer health check and did the basic test and Test drive both hard say Test INTELLIGENT: SMART short Self Test FAILED. What does that mean?!

  Hello

  It simply means: the HARD drive is about to die. Please save all your data if you could and be prepared to replace the HARD drive. Is your machine still under warranty? If so, please contact HP for replacement

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Kind regards.