HP Pavilion Elite m9590f PC: error HD521-3W.

Similar Questions

• Pavilion Elite e9105z Disc error (BIOHD-8) motherboard is also bad.

  I have an e9105z Pavilion Elite 3 years with windows 7. About 6 months ago, I began to have freezing problems. Finally, I ran diagnostics on this issue and found that the hard drive was bad. (BI0HD-8 error code)  I ran the disk check, and it seemed to fix the defective sector. In a few days after that the whole computer just died. I tested the PSU and it was good. By pressing the button start has no effect. When I plug the thing that happens, is that the green light on the power supply turns on. It is now a paperweight.

  I understand that HP has been using lower Seagate hard drives and motherboards and shipping them knowing that they were wrong and now I'm stuck with a $600 paperweight. I would like some satisfaction of HP but I can't yet talk to them without charge.

  Anyone has had problems similar to mine, and if so have you been able to solve it with HP? I'm little about as upset as anyone can get. I bought several HP products. How to get to someone?  If nothing else, I want to say thank you shipping shit they knew was bad. Any help would be appreciated.

  Please hold me.

• Desktop HP Pavilion Elite 150ff: performed a cover of the factory, now I get the error HP photo creations DC18

  I did a factory recovery using Recovery Manager on my desktop of windows 7 Home premium, Pavilion Elite 150ff. After having installed all the updates and download flash player and Adobe Reader and install my Antivirus HP Photo creations program won't work, I get an error message saying DC18, and Microsoft claims it is incomatible, I have the icon on my desktop. Tried to download it from the HP website, but my anti virus detected a trojen, how can I get this program working again. All other programs work fine, my desktop is wired but my 7520e printer is wireless and connected properly. Also HP smart web printing does not work, using IE11.

  Hi Emma.

  Uninstall and reinstall HP Photo Creations should resolve the error. Here are the instructions step by step for Windows:

  1. check your Internet connection

  • If you have access to the Internet from a company or a network of offices, please make sure that the network or the firewall allows access to the HP Photo Creations software.
  • Check your computer clock to make sure the date and time are set correctly.

  2 uninstall and reinstall HP Photo Creations

  Step 1: Uninstall HP Photo Creations

  1. Click Start
  2. Click on Control Panel
  3. Click Add or remove programs
  4. In the list, select and delete HP Photo Creations

  Step 2: Download and reinstall HP Photo Creations

  1. Go to https://shop2.rocketlifeproduction.com/hpfe6fd34b208847e8f8254b9be96e8c4c/catalog.html?gta=download
  2. Click on the download button. Depending on your browser, you can choose to run or save the program. Choose run if they are available. (If you choose Save instead, double-click the file you downloaded).
  3. Follow the instructions on the screen to reinstall HP Photo Creations.

  Step 3: Open HP Photo Creations  

  Open HP Photo Creations by double-clicking the shortcut on the desktop, and then confirm that it works.

  I restart the computer after step 3 may help as well.

  -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  Our support team is always happy to help you. You can contact them at www.hp.com/go/supportform

  Thank you for using HP Photo Creations,
  
  RocketLife

• HP Pavilion Elete m94021: 64-bit Windows 7 keeps freezing without error on HP Pavilion Elite m94021 desktop PC

  Windows 7 64 bit continues to freeze without error on HP Pavilion Elite m94021 desktop PC.  He'll go sometimes for several hours without freezing it sometimes minutes. The problem seems to become more common.

  Thanks for the reply and information. I had read the document before and tried different options, including a resumption of systems.
  I brought the PC to a specialist, so far, they have not been able to find the problem. Would it be the Mo or graphics card?

• HP pavilion elite m9350f: I forgot my bios password on my hp pavilion elite m9350f

  Error loading operating system. When I try f10 im done typing a password (I forgot witch) f1, 2, 8, 11 and 12 do nothing... pressing esc takes me to the boot menu hard drive, give NVIDIA boot agent error says cable unplugged

  Hello:

  Please see the link below the last section to find out how to clear the BIOS password.

  http://support.HP.com/us-en/product/HP-Pavilion-elite-m9300-desktop-PC-series/3733093/model/3747343/document/c01421635/

• w7 on Pavilion elite 020nl installation is not possible

  Hello.

  in 2010, I bought 2 hp Pavilion elite 020nl

  I had to replace the video card and the powersuply.

  Now I bought 2 new hard drives to replace two C WD Blue 1 TB drives

  My problem is that I can't install win 7 on both machines, I get defects such as

  -can not configure windows to run on this computer-

  the original hard drives are Seagate 750 GB

  After looking at the seagate, I see written firmware hp34

  This means that I have to buy seagates? or HP seagates?

  is there a way around it?

  needles to say I am quite frustrated with all this

  Thank you for your time and excuse my English because it is not my native language

  COR

  installation of w7 on Pavilion elite 020nl

  Hello:

  The only suggestion I can offer is to try the following if you have found that windows cannot be installed on this hardware error...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 2101 & DwnldID = 23060 & Keyword = Intel + rapi...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully, W7 should install.

• Replacement for HP Pavilion Elite e9250t HARD drive

  I get an error message saying "A disk in a RAID 0 volume is a failure".

  I plan to replace both drives, currently, to 500 discs with a capacity higher than as 2 TB each. The Pavilion Elite e9250t supports 2 TB disks? And can I install them with RAID, so that my data is protected?

  Hello JMHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have questions about your desktop PC HP Pavilion Elite e9250t supports 2 TB disks and whether or not it supports RAID. According to HP Pavilion Elite e9250t desktop PC product specifications and configurable Options , your computer supports "2 TB (2 x 1 TB) 7200 RPM SATA 3 G (3.0 Gb/s) ' so the answer to your first question is 'YES', it will support a 2 TB hard. As to your second question as to if she supports RAID, indio motherboard (which is what you have) supports the following:

  • Integrated RAID controller: P55 (same as previously introduced application ICH9r RAID)
  • Steps to configure RAID (internal link to setup for P55, even the steps of configuration for ICH10r and ICH9r)
  • Intel RAID solution is called Intel Matrix Storage Technology (outside link)
  • Only some models indio compatible ship RAID (see datasheet for your model). Compatible RAID means that the system is ready to be configured for RAID 0 or RAID 1.
  • Migration from 1 to 0 is supported by material in the world.
  • RAID modes supported *:
    • RAID 0
    • RAID 1
  • Additional resources:
    • Overview of RAID
    • Intel Matrix storage technology (outside link)

  * NOTE: three hard disks requires a RAID 5 and RAID 10 four hard drives. While the hardware can support other RAID modes, only RAID 0 and RAID 1 modes are supported on models that include this motherboard.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Pavilion Elite HPE-270e cannot update the bios

  HP Pavilion Elite HPE-270e desktop PC

  Microsoft Windows 7 (64-bit)

  I have a problem running the sp49903.exe that contains the last update of the bios for my pc. My antivirus is disabled, no other programs are running, I am logged in as administrator and also tried to run as administrator, but that I always meet the same problem. It runs and I click Next and then I agree with the terms of the license agreement and then click Next and then I get an error message: (the contents of this file cannot be unpacked. The executable file that you are trying to run has been damaged. If please get another copy of the file, verify its integrity and try again.)

  My latest version of bios is 5.28 and I'm trying to update to 5.29.

  HP Pavilion Elite HPE - 270e Desktop PC product specifications

  Software downloads & Driver - HP Pavilion Elite HPE-270e desktop PC

  you try to download a new copy of it?

  I did and it worked.

  try to download and try to install on another PC and see if the error is the same. It will not install on another PC, it checks to see what the BIOS is the first. But the error you report no has nothing to do with the BIOS, it tells me the downloaded file is corrupt and since I just tried to download and install and it worked, it tells me the file on the server is good.

  Good luck

  Bill

• HP Pavilion Elite HPE - 500f D: SSD replacement for HP Pavilion Elite HPE-500f to original desktop PC hard drive

  Hi all!

  I would like to replace the original hard drive came with my desktop HP Pavilion Elite HPE-500f with an SSD, but when I tried, I got the error message that my SSD drive was not big enough. The original hard drive is 1.35 TB. What size an SSD should be to replace the original CT 1.35 supplied with my HP so that I could use the 1.35 disc as my second drive and the ssd as my main drive?

  Thank you!

  Hello

  Yes I think a 240 GB SSD would be sufficient.  Using the hard drive for storage is a good idea.

  These articles HOWTO HP should be useful.

  You should be able to install the SSD in the existing hard drive cage as it is put into service for three hard drives.  Use a 2.5 "to 3.5" adapter.  You also need a SATA data cable.

  Don't forget to create the external recovery media and backup your data.

• Win7 64 bit and computer Pavilion Elite

  I have a Pavilion Elite 9753uk with a NVIDIA Geforce GT220 graphics card that willl not work with win7 64 bit, latest drivers are suitable, but it needs a graphical BIOS update which does not always have to be made available, Nvidia forums full of unhappy people!

  He will have to buy a new card, not in the game, but would need a duel monitor setup, suggestions please for a card that won't break the Bank, works with Windows 7 and 64-bit.

  Thank you for your sensible suggestions.

  After a verey frustrating weekend of research into the problem, I find that there is no solution to the incompatibility of the HP Pavilion / 220 Nvidio (N11071) and 64-bit win.

  Not wanting to spend money on a new map to see the same error occurs, I'll now wait for win7 SP1 (ormaybe even 2) in the hope that a workaround is provided.

  Thanks for your help

  Derek

• USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

  I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

  Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

  I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

  I tried a different mouse and keyboard and Windows behavior is the same.

  Now, I would like to have active remote destop. Difficult to solve without an input device.

  I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

  After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

• BM.exe on a HP Pavilion Elite d5200t ATX?

  A few months ago, I have a HP Pavilion Elite d5200t ATX with pre-installed Vista 64-bit.

  More recently, I noticed the BM.exe program included in its start menu would rarely go more than a minute after a reboot without close with an error message (non-registered details)

  Even more recently, I found a reason to run the Norton Internet Security program that came pre-installed on this machine in the next higher than default scan mode.  He then paid account the BM.exe file looked like it might be malicious and had no certificate indicating what company it origin and therefore should not be allowed in the start menu.

  This file is even supposed to be included in the Vista 64 pre-installed for this machine?  If so, is there a newer version which runs correctly, comes with an appropriate certificate and entered in database of Norton of the software which is not a virus or other malicious software?

  Also, what directory does in?  It seems to have disappeared from my computer when I leave the disable Norton program in the start menu. recent research of the entire disk C: failed find.

  Delete it.    http://www.bleepingcomputer.com/startups/BM.exe-21373.html

• HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

  Hello

  I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

  Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

  Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

  Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Supports up to 8 GB on 64 bit computers

  Supports up to 4 GB on 32-bit computers

  4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

  BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

  Exit the: 2009-08-03

  Version: 5.05

  Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

  Fix/development:
  Resolves a problem with USB not detected mass storage devices.

  Updates the boot order to place the optical drive before the hard drive.

  Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

  Updates vBIOS to address issues HDMI.

  Updates the strategy thermal processor.

  Fixes an issue with the BIOS fault recovery if the card reader is connected.

• Pavilion Elite HPE-180 t, windows 7 64 bit started to stop the sleep mode.

  Pavilion Elite HPE-180 t, windows 7 64 bit began to stop in the past few weeks.  It seems to happen from the sleep mode.  I leave the computer for more than 20 minutes, and when I come back, it is turned off.  When I start again, I have an error message and be able to start in safe mode.  I start in normal mode and I get an error "windows has recovered from an unexpected shutdown" without solution.  I also see an action center say error - consider sending additional information about a problem with the ATI display driver (graphics card is ATI Radeon HD5450 1 GB).  When I click for the solution, says that this solution could not be downloaded.  I've updated my drivers.  I haven't added a new hardware or software.

  Thanks HardBeatZ (HP).

  I did as you suggested and I had to uninstall several times because the device picked up previous ATI vs the generic drivers.  In any case it still stop with the blue screen of death when waking from sleep mode.   Then I went back and installed the latest graphics driver from the HP site for my system. I still had a few stops.

  Then I went through all my devices and checked for latest drivers.  All said that the best version is already installed.  Then I noticed that my HP bt500 bluetooth USB 2.0 adapter had only a driver available for windows 7 32 bit (I have installed 64-bit).  I used a keyboard and bluetooth mouse.   So I unplugged the adapter and have resorted to the USB keyboard and mouse and closures of blue screen stopped.  It seems that the network card was originally wake up from its sleep.  I also disabled the reactivation of LAN in the properties of the network adapter device.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.