HP photosmart 7510: installation without CD rom

Similar Questions

• Photosmart 7510 - scanning without cartridges

  I discovered the hard way that I am unable to fill HP ink cartridges, and now my 7510 says there is no cartridge installed. Of course, I have to go buy new, but here there...

  I am trying to scan something, but are the only option available to me for me to watch a stupid animation show me how to replace my ink cartridges. I tried to reset the printer, but I get the same screen. I understand, there is no ink - but that should not affect scanning or fax!  I could REALLY use some help here.

  Hello

  I posted on the forums of little last year, including this forum. Suppliers (all, not only HP) should allow users to scan without ink but I believe that the main function of this type of devices: PRINT that why not ink they don't work.

  Sorry, can help you but hope that they it will work someday.

  Kind regards.

• Photosmart 7510: Need an installation software

  I had to uninstall my printer to my laptop.  I guess I'd be able to re - install with a download from the Web site, but I am unable to find anything.  The original CD supplied with my printer is now incompatible with my operating system.  Where can I find software to re - install my printer on my computer?  Thank you.

  Hi there @rcohenkim ,

  Welcome to the forums

  I have seen your post about how you want to install your Photosmart 7510 on your Mac of Yosemite and do not have the disc. It's quite normal, that you can click on the link I posted below to help the pilot will need to 10.10.

  Series 7510 C311 Photosmart HP full feature software and drivers

  I hope that helps you with the driver you are looking for

• Photosmart 7510 C311a: Bought used Photosmart 7510 C311a and does not allow me to print

  Good afternoon everyone,

  New to the Forum and took a look around to see if my problem could be fixed, however, I was not able to locate a suitable to my printer. I recently bought a printer Photosmart 7510 of second hand without a usb connection or installation of the cd. I managed to hook the printer up to my wireless network and test prints however, when I try to print something in the computer itself, the printer will not be displayed to draw. I pulled up the devices on my home screen, and it allows me to choose this printer as my favorite. I try to run the troubleshooting option and he answers, "the WSD print device driver is not installed. Install the latest driver for the device. I click on the option 'Apply this correction' and she comes back with him could not be installed because there was no driver found. I tried to download the right driver, but it is yet to be found on my computer. Any help would be greatly appreciated!

  Respectfully

  ~ MightyCaz

  Hey @MightyCaz,

  Welcome to the Forums of HP Support!
  
  I understand that your connected HP Photosmart 7510 wireless e-all-in-one printer fails to print from your Windows 7 computer. I would like to help you today with this printing problem. Because you get the message that "WSD print device driver is not installed... " It would seem that the packet driver HP full feature software is not installed. So, I'll you run through some standard troubleshooting steps below to fully install your HP Photosmart.

  Can I have it please click here to download the package full feature software and driver of your HP Photosmart camera. Once the download is complete, please follow the instructions on the screen to install your all-in-one. Once installation is complete, please try printing and scanning to confirm that everything works as normal.

  Please reply to this message with the result of your installation. I look forward to hear from you!

• HP Photosmart 7510 not scan to computer (MacBook Air)

  Hello

  I have a HP Photosmart 7510 connected wireless to my home network and I can't select my computer when parsing the list for the computer on the printer.

  I use a MacBook Air with OS X 10.8.2

  I've updated all my drivers, reinstalled the software and disconnected/reconnected to the network several times.

  I can print to the 7510 my computer.

  I can scan the 7510 using the HP software on my computer

  I am unable to find 'activate Scan to Computer' in the settings on my computer (and all instructions on this Web site are for Windows)

  We organize also several computers window on our network, and these show all in the analysis of computer selection and can be analyzed successfully to. (without going through the HP software installed!)

  What is missing for me to scan to my computer? Scan to other computers is not an option (for reasons of confidentiality) and scanning the computer is also not ideal, because I bought the printer for the analysis of it infrastructure.

  Thank you

  Emma

  Hi Emma,

  If the Scan of the computer does not appear under the HP utility, more liekly something went wrong in the HP installation wizard.

  Try these steps and let me know if that can help you:

  First reset the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Then, go to Applications\Hewlett - Packard\Device Utilities and follow the HP installation wizard.

  Now open the HP Utilitiy and search the computer Scan in the scan parameters section.

  Kind regards

  Shlomi

• HP Photosmart 7510 copy two-sided documents

  My newly installed HP photosmart 7510 (model No. C311a) will not copy two-sided documents.

  Here's the story: on the screen of the printer, I went to copy > Settings and choose "2 faces".  After the first printing, side I put the original and replaced it in the charger.  After a break for the ink drying, the screen read "Copy...", but the original was not sucked into the feeder and the copy that came out had only the first side top.   I repeated several times with the same result.

  At no time did any alerts or error messages.

  I tried all the remedies suggested earlier:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/HP-Photosmart-7510-won-t-print-double-s...

  I uninstalled all the drivers, etc of the CD included and downloaded and installed later from HP.  But no help!

  I went to: Control Panel > printers & faxes > series of HP Photosmart 7510. Right-click on the last, I have found no reference to "Restore preferences", "Reset Printing System", or "installation of printer," as mentioned in the previous post.

  On the homescreen of my computer, I clicked on the icon "Series of HP Photosmart 7510."  Assistant HP printer that has opened, I chose: the value of the preferences > series HP Photosmart 7510 printing preferences > advanced. At the last, I have reset print borderless to 'Print without borders', but it was also without success.

  I have Windows XP Pro. Any other suggestions?

  Hello

  AMPe #21 its manual implies that we should use the glass, NOT the ADF. I've tested this and it worked.

  I hope this helps.

• Photosmart 7510: Errors of inconsistency of paper photosmart printer 7510

  I am trying to print my 7510 by using custom paper sizes and get paper mismatch errors.  I use Word for Mac v. 14.4.8 on a Mac under OS X 10.10.2.  I went through all the tips in the HP support pages to try to fix this problem without success.  There is no firmware upgrades or updates of available driver I can find support/HP.  This error is more annoying.  I have not had this problem on my old printers I've foolishly got rid of upgrade to the all-in-one printer. Can you give me any help other than suggests to use the information on the support pages that did not work.  ! have created various paper formats customized in word to see if I could find a magical Assembly which will print and have had no success.  If someone cannot help me solve this problem, it will be the last HP printer that I buy.

  Full of hope for some real help.

  Hey @oldgt!

  Thanks for getting back to me!

  If you see only the media and the quality in the dialog box print, then that indicates that you are using the Apple Airprint drivers and not the pilot series Photosmart 7510.  If the printer does not have the correct drivers, it may not work properly from third-party programs such as Microsoft Word or Adobe Reader.

  To remove and re-add the printer using its drivers:

  1. Click on the apple icon in the upper left corner of the Mac
  2. Click on System Preferences
  3. Click on printers and Scanners
  4. Select the printer and press the minus (-) signs below the list of printers
  5. After removing the printer, click the plus (+) sign below the list of printers
  6. Click "add another printer or a Scanner.
  7. In the add a printer window, select your printer
  8. In the drop-down list 'USE' make sure you only select the series Photosmart 7510 and NOT Airprint
  9. Add the printer and try to print again

  

  

  If please, after back and let me know if this worked for you!

• Can multiple Photosmarts (7510 and C309g) be configured to scan on the same computer?

  I have an Acer PC Windows 7 with an AMD Athlon X II processor, 4 GB of RAM.

  I have Photosmart C309g and everything-each 7510, both connected via wi - fi, using different IP addresses that are not in conflict with other devices on my network.

  I executed the complete installation for both HPs.

  I can print either, but I can scan only using the 7510.

  When I open the HP scan diagnostic, it does recognize that the 7510 - the c309g is not yet listed.

  I noticed only 7510 application record contains a HP scan application and it also recognizes that the 7510.

  There is no application scan c309g folder.  I tried Win 7 Windows Fax and Scan application but that also recognizes as the 7510.

  1. is there a way to configure the system so that it can print and scan from these two Photosmarts?

  2. If the scanning using a 7510 and c309g does not work, could I use a 7510 both a 7520?

  Hello Osiris43,

  Welcome to the HP forums! I understand that you are unable to scan a document using the Photosmart Premium C309.

  You should have two printers scanning capabilities, because they have a different software. The Photosmart printer using the Solution Center and the Photosmart 7510 uses the Printer Wizard.

  I suggest you uninstall/reinstall the software Photosmart Premium C309. Please follow these steps:

  Please follow this HP document uninstalling the software of the printer.

  Then, perform a clean boot on your computer. I'll give you a Microsoft document on this step here.

  Now, install the full features on the site of HP software here. Choose your operating system that is appropriate; 32-bit or 64-bit.

  Once installation is complete, please click on the document to Microsoft, and "how to reset the computer to start normally after a clean boot."

  Please send me your troubleshooting steps.

• Pavilion a6312p: Photosmart 7510 prints blank page

  I have a HP Photosmart 7510, who served me well for over a year until what I tried to use it today.  I tried to print a letter in Microsoft Word 2010, and the printer produces a blank page.  The ink levels are good, in fact, I have a brand new black and photo black installed this week.  I tried to print a test page and nothing printed except the logo of Microsoft of color and words, printer Windows-Page of Test, the text is so light that I could barely read.  I have cleaned the printheads twice, and represented the test page with the same result.  I don't know what else to do.  The HP Scan and print doctor said all control very well.

  I used the printer every day since the installation of the new black cartridges and it was working fine until today, so I know this isn't the issue.  I hope there, can someone give me an overview of this issue.

  Hi bankercop,

  I see that you have a hard time getting black ink for printing with the Photosmart 7510, I would like to offer a suggestion. Have you tried cleaning the print head manually?

  Accumulation of ink can lead to this problem and the own automatic does not built / dried ink in the head.

  Although this guide: 'Is missing or does not have the print head' or "Print head is not detected, missing or not installed correctly" appears for HP Photosmart e-all-in-one 7510 Printer series, addresses, a print head missing, the cleaning steps are the same.

  I hope this helps you. See you soon!

• Print two-sided Photosmart 7510

  I'm running Mac OSX 10.9.3 and a pilot recently re-installed for my Photosmart 7510 (long story on renewed OSX installation). Any application that I use, I am unable to get the 7510 to start to print at the long edge binding. It ONLY prints in short-edge binding. I have re-installed the driver 2 X and downloaded 2 X so it should be no problem in this regard. Someone has an idea?

  Hi dominik_12,

  Welcome to the Forums of HP Support! I understand that you are not able to select Long Edge binding when you try to print to your HP Photosmart 7510. You have tried to uninstall and reinstall the driver unsuccessfully on the BONES of the Mavericks. I want to make sure we select the HP driver and not the AirPrint driver who would give only limited options.

  Complete the following steps:

  Reset the printing system

  1. click on the Apple icon and then click on System Preferences.

  2. in the hardware section, click Print & Telec. Dialog print & fax opens.

  3. make a right click (or Ctrl + click) in the left panel, and then click Reset printing system...

  4. click OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The dialog box Print & Fax shows no printer selected.

  Add the PS 7510:

  1. click on the sign plus (+) sign and locate the PS 7510, highlight the printer

  2 in the section using printing, make sure that you select the driver HP PS 7510 and not one AirPrint.

  See the image below (you want to click the HP not the AirPrint driver):

  

  Now that we have the PS 7510 driver selected, please open the program or document you are interested in printing and follow the steps here:

  1. click on the command Apple + P , your print dialogue box opens, click on the option view details at the bottom left (it may already be open)

  2 just below the Orientation section, click on the arrows to access the drop-down list, and then select page layout

  3. now you should see the two-sided printing of the menu drop down, here you can select Long Edge binding.

  4. click on print

  Now able to print successfully long edge bind you? Please let me know if this was helpful, I'll watch for your reply.

  Thank you

• Photosmart 7510 stop scan to PC (Windows7). Diagnostics and help have not solved.

  Printer - Photosmart 7510.

  System: I'm on Windows 7 home premium 64-bit, I have Norton 360.  Laptop is Acer Aspire.

  Problem - Photosmart 7510 - scan is no longer to the PC.

  Software won't uninstall (so I can ' t reinstall)

  Connect the printer software installation impossible (he always recognizes the printer on the network)

  Scanner not recognized.  When I click on scan HP he says 7510 series unrecognized.  If I click on manage scans devices/printers, nothing happens apart from hourglass.

  I lived all the online help and scan doctor and spent 3 days on this.  Nothing seems to fix it or repair.

  The scanner, printer and copier what worked first implemented, including scanning to pc.

  Now, everything works apart from scanning to PC.

  A few days later the scanner to the computer stopped working and could not be recognized if clicked (for example to allow the scan to PC function).  Scanner the doctor then tried to uninstall and reinstall the software.  The basic device HP software won't uninstall, whether through the HP program or control panel.  There after the reboot, even when supposedly uninstalled.  I tried to reset the defaults on the printer, turn off the power sector, removing the printer from devices and printers, fixing and cleaning the registry errors, checking all relevant WIA and CPP are restarted and automatic according to the directives of this help: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Photosmart-7510-won-t-scan/m-p/1749193/high... I followed all the HP help topics and have tried drivers updated and installation of HP.com.  My laptop was rebooted about 50 times in the last three days trying to get this resolved.

  When I click on the printer defined upward and the software it prompts you to connect the new printer.  It finds my 7510 (wireless), but says that it cannot install it.

  I can't do windows system restore, because there is no set of restore points.  I tried to disable firewall for connections and installation of the software.

  Various error messages appear:

  During the uninstallation using the control panel.

  "Scan to PC Activation App" needs closing (I can only find in the tasks of process manager I then complete the process)

  If I try to use the HP uninstall later said there is no uninstall HP.

  I have the original CD.

  Any ideas as to how my scan to PC to work again?

  Maybe this isn't the case in your situation, however, security software (firewall/anti-anti-virus/malware) can cause endless problems, depending on their configuration. Norton 360 is an extremely invasive program, part of what makes it so effective. But, get the settings to allow access install/uninstall the devices through 360 can be complicated. My advice before you try anything else, would be to disable Norton 360 (gives you regular intervals) then try Solution 3 in the Windows 7 of this troubleshooting document installation section:

  http://goo.GL/Qtbcf

• Photosmart 7510: turn on the scanner only

  I scan more print and want to turn on my scanner without initializing the printer function (and therefore waste). can I do this?

  The printer functions are initialized when the 7510 is turned on, you cannot switch on the scanner separately.

  I suggest that you keep the printer plugged directly into a socket slot - if you use an external switch as a switch taken out of ink will be used when the printer is on.

  The Photosmart 7510 enters a low power standby state, you might consider leaving the printer 'on' and leave the management of the ADF to take care of things.  The Photosmart 7510 is Energy Star rated.

• My Photosmart 7510 cannot send a fax.

  Hi, I recently bought the HP Photosmart 7510.  I had no problem connecting to my network and web services are enabled.  I received a fax without problem.  I read that I have right to free 20 incoming and 20 free outgoing faxes.  I can't send a fax.  I tried several times to send a fax and the printer itself will list the fax as a success, but it does print a status sheet and that works as well.

  Please notify.

  Yes, it is better but a '1' before the number, I'm glad that works for you. I used to say good impression, but in this case happy fax!

• HP Photosmart 7510

  I bought a HP Photosmart 7510 last month.  I put in the first game without problem ink cartridges, print very well.  I just replaced the black cartridge 564XL, and now it will not print in black. All the other colors print fine but does not print black.   I did the alignment of cartridges, cleaning cartridges, restore default settings and no luck. This is a new printer.  What Miss me?

  Thank you

  JTE

  Remove the cartridge & replace before replacing to clean the copper contacts at both ends of the cartridge & printer & try if still problem persists contact the vender store & get a replacement it will works

• Scanning Photosmart 7510 problem

  My Photosmart 7510 worked fine for six months or so I've owned it. Recently however, my laptop stopped recognizing the 7510 scanner, although the impression was very good. After having tried in vain a few things, I deleted all the driver from HP and other software and it reinstalled from the CD, but the problem persisted. I worked through the guide installation failure MSI 1603 HP, including downloading of new versions of drivers and other software, and everything has worked fine until it is returned to normal startup in msconfig and restarted the laptop, how the scanner is not found again.

  I run Windows 7 and connect with the wireless printer.

  I guess that something in the startup is interfering with the communication scanner, resulting perhaps an update from Microsoft.

  Any help would be appreciated.

  Welcome to the Forums of HP Chris170,

  I see by your post that the scan has stopped working. To turn off the startup items, it started working again.
  I can help you with this problem.

  The cause would be a program that runs in the background.

  Try with the Antivirus Scanning software off to remove the cause.

  Then you can go into the msconfig for Startup tab and just activate a few elements at a time and try to scan the image. In this way, you can leave the problem not controlled. But your time will help.

  For my part, I turn off everything but my Antivirus software in the msconfig. Speeds up the computer also.

  If you need help, let me know.

  Good day!
  Thank you.