Illustrator CC hangs after printing

Similar Questions

• LaserJet 4100n: LaserJet 4100n hangs after printing 2 pages followed by a blank page

  Until very recently, the LaserJet 4100n printer we had put in place was working very well. Today, we noticed that whenever we try to print something that is longer than 2 pages long, the same behavior occurs.

  First of all, it will display the first 2 pages of the document correctly. Then he goes to crash an empty page, stop printing, but still got the message "Processing Job of tray 2" on the screen, as well as data LED continues to blink and the printer does the usual printing sounds (though nothing comes out). Even if I wait and leave it like that, nothing is printed.

  If I lift the Panel before when it crashes, the noise stops and the screen displays a message "close the front cover. At the close the front cover and wait a few moments, the print job takes over and the next 2 pages of the work print, as well as another white page, and the printer hangs once more. It is possible to repeat the process until the print job is completed, but it is tedious and time consuming, whereas the print jobs may have a lot of pages.

  It is also worth mentioning that no error messages appear in the event logs, and we use this printer as a network printer.

  Any ideas?

  You have a stickey solenoid which controls the roller in tray 2.  You suggest doing a google search for the service manual and then look for instructions on the decomposition of the printer in 2 halves.  The lower half will be where the solenoid.  You remove all the screws of the cover plate and remove the plate of the electromagnet is on the right side toward the front and has 2 black wires, it will.  Remove the solenoid, remove the spring for "L" arm and then clean up the residue of glue that held the cushion damping in place.  Replace with the material of substitution as a buffer of furniture pad slim cut.  Replace the arm L put the reel in place and back and it should work perfectly.  For tray one you must order a tray 1 separation pad.  Yet once, just do a search on google for the element as it is real cheap and very easy to install.

• Illustrator CC hangs after startup

  I saw that questioned more than times that I can count and I tried more bugs than that. I saw not a single solution for this on the forums.

  In any case, my Adobe Illustrator CC closes / crashes just after opening. I have to display the dialog box indicating what is new and it will be is not broken until after I hit very well, then in a few seconds, it crashes.

  I have Windows 8.1, all needed fonts, I tried to remove my preferences and reinstall several times.

  I contacted Adobe and they said maybe it's a registry error and that they'll fix it for more than $200 so I don't not done because it is absurd and I don't think it is a mistake to register. I have Photoshop CC and it works perfectly.

  I'd really like to hear from anyone who wants to help, it's really frustrating.

  Thanks in advance

  I finally fixed it!

  For anyone else having this problem this is how I fix

  C:\Program Files (x 86) \Common Files\Adobe\SLCache

  C:\ProgramData\Adobe\SLStore

  Find these two folders and move SLStore and SLCache folders to another location. Illustrator automatically generates them and then it worked!

  * C:\ProgramData is hidden, you should see and exploit the hidden files.

• Illustrator CC hangs after the installation of the Mavericks

  Hello

  CC of the Illustrator and Illustrator CS6 crash just after they opened, since I installed the Mavericks on my system. Illustrator CS5 will still work.

  I hope someone can help out me because I need Illustrator CC for my work every day.

  Thank you
  Kristiaan

  Hi Monika,

  Problem solved!

  I use Vectorscribe, just disabled the plugin, and... Illustrator works again

  Thanks for the quick help!

  Kind regards

  Kristiaan

• Illustrator CC hangs and crashes since switching to the new computer

  A few weeks ago, I got a new computer at work. Ever since then, Illustrator CC hangs and then crashes after having been opened or reduced to a minimum for a little while. HE tried to uninstall and reinstall Illustrator several times and even exchanged maps charts twice without success. I'm stuck doing an office away from an old computer everytime I want to use Illustrator. I never had this problem on my old machine.

  The crash is never immediate; It is always after the Illustrator has been open for a little while. If it is minimized, when I try to bring it to the top, everything that the restorations is a small gray rectangle in the upper left corner of my screen. So when I try to fill the taskbar Illustrator, it crashes. This is the error it gives:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Illustrator.exe

  Application version: 19.2.1.147

  Application timestamp: 56980904

  Fault Module name: Illustrator.exe

  Fault Module Version: 19.2.1.147

  Timestamp of Module error: 56980904

  Exception code: c0000005

  Exception offset: 00000000005dee0f

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: ab66

  More information 2: ab66924942911c6b808d11dc452c4695

  3 more information: 8ade

  Additional information 4: 8ade956723bf9d937d2f279371b2c677

  Read our privacy statement online:

  http://go.microsoft.com/fwlink/?linkid=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Any help would be appreciated!

  Kiki,

  You can try to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  To uninstall:

  https://www.Adobe.com/cfusion/search/index.cfm?loc=en_US&term=uninstall&cat=support&produc t = illustrator & auto = 1

  Here are the instructions for the use of the cleanup tool:

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

• After printing a page, when I try to print again it says print function is not available

  I have a Canon MG6250 connected via USB. I run Windows 7 with all latest updates and the version of Firefox is currently 38.0.5. Since some time, probably about a year, starting after a new version of Firefox, I think, I have problems printing. (Sorry I don't remember which version it started happening.) Unless I'm waiting for the printer to prepare completely, although the print dialogue box appears and I click on print, often (not always) nothing happens. If I try to print again I get a pop-up window indicating that the print function is not available. If I then close Firefox and try to restart it, it tells me Firefox is already running. I have to put an end to its process through the Task Manager. Often, I want to print from several tabs already charges with the pages to print. Even if I managed to get the first tab print, somewhere along the line the same thing often happens: before I printed the tab page from the last I get the box pop up again and I have to end the process of Firefox to make it work again. I can generally prevent his happening if I monitor the activity of the CPU of my computer (via System Mechanic) and make sure that all activity ceased after printing a tab until I try to print on the other. This makes printing of desperately slow Firefox!

  I don't have any problems printing of any other application.

  Note that relatively recently, due to a failure of the system disk, I reinstalled Windows and all my software. I was hoping that a by-product of doing this can solve the problem with printing from Firefox, but it didn't.

  I would be very grateful for a solution to this problem.

  I continued to use IE with no problems printing. But then after Firefox 3.0 came out I gave it another go - and the problem seems to have been resolved. No matter how much time I spend in another tab and select print, it behaves as it should. Thank God - Firefox is so much better than IE.

• I was wondering if I'm looking for something which exists not-firefox can automatically close the "Print preview" window after printing?

  I use the addon in my firefox toolbar to print an excerpt from the data of the Web site and then add it to a pdf file. Sometimes I'm distracted, then do not remember if I went through the process and print/added the page in the file. It would be useful if there was a way that the print preview window closes after printing which confirms that the process is complete. Thanks in advance.

  You're right: print preview remains open until the licensee. As a person who is regularly using the ESC key to dismiss dialog boxes, I had not really noticed an extra step.

  After a little research, it triggered a few times over the years (at least 2 identified bugs) but one was rejected immediately and the other has not attracted a serious debate since it was filed in 2006. I think that there are no secret switch in the software to do this.

• MBP running El Capitan hangs after login

  Today, my 2011 15 to the Macbook pro mid hangs after login to the admin account. The status bar does not appear, or the desktop icons. Nothing does, and I need to force the shutdown to be able to restart.

  These are the things I've already tried:

  • Restart in safe mode: the desktop icons will appear, but all crashes after a few seconds. I think since safe mode does not work, the problem with the Finder, DS_Store problem, icon, or a problem with iCloud. So I went to the next step.
  • Running the tool of first aid disk utility in OSX (restart + Cmd + R) recovery tools: it indicates that the drive is OK.
  • / Sbin/fsck - FY running in single user mode: the drive seems to be OK.

  I don't know what to try next. Since I really need my computer for the next few days, I could go to an Apple store later this week. Of course, I would be really happy to avoid the costs of this option.

  Anyone of you has an idea of what I should try next?

  What safeguards do you have?
  You have another account that works?

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

• Satellite M50 226 hangs after the victory of logon Wlan is turned on

  Hello everyone,

  I had a problem with my satellite m50-226.
  It happens quite often that when I boot up my laptop a card WiFi is turned on, the computer hangs after windows journal.
  When I type my user password nothing happens and a few seconds later, the background appears but nothing else.
  When I restart the laptop the same problem occurs. only when I turn off the wlan card, I can start the computer successfully.

  Maybe anyone can help me?

  thanx.

  welcome them
  Alex

  Hello Alex

  I am very interested about your problem and it is interested to know if this problem persists if the unit wakes from sleep or hibernation mode.
  Can you please verify this?

• X 1 carbon 2014 windows 7 hangs after the main power connection

  Nice day

  After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.

  The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.

  Thank you!

  Pawel

  
  

• Photosmart HP 7520: All wireless network devices will lose connectivity after printing

  Dear all, 
  
      I have a problem with my HP Photosmart 7520 printer where all wireless network devices will lose connectivity after a printer has been sent to the printer.
  
  * Summary
  Wireless network unusable after sending one print to HP printer
  No device ( computers nor smartphones ) can use the Internet nor access internal networks ( 192.168.0/24)
  
  * Details
  Turn HP printer on.  ( wireless direct is off - never turned on )
  HP printer connects to working wireless network.
  Other devices ( phone/computers ) already connected and working.
  From any device, send a document to the printer.
  Printer prints document successfully.
  Immediately after printer has printed all devices cannot access internet IP range ( including HP printer ) nor Internet nor router ( 198.168.0.1 ).
  
  * Reproducibility
  Always
  
  * Work around
  Disconnect all devices from the network.
  Power off printer.
  Reboot Internet router.
  
  * Attempted solutions
  Removed wireless configuration.
  Factory reset.
  Added wireless configuration back.
  Powered on and off printer.
  
  * Printing tested with
  Tested with Macbook10.11/Windows 8/Ubuntu 12/Android 4.4.2
  
  * Not tested
  Ethernet cable directly connected to router.
  
  * Internet Router
  Netgear CG 3700
  

  Number of brand and model of the router?

  These settings are to set up your printer wireless (or wired):

  • Stay connected to your router
  • Trouble printer status 'offline '.
  • Wake mode 'sleep'
  • All wireless devices stay better connected

  While the DHCP is convenient, devices like printers (wired and wireless) should always be assigned a (fixed) IP address manually to avoid conflicts on your wireless network and must be outside the range of the router DHCP.  After the adjustment of the static IP address the computer must be updated to show a Standard TCP/IP port with the IP address of printers under printer properties/Ports.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here and here and still more here.  Video here explains the problem and how to solve the problem. <--> So watch this!
  2. Or check in the printer "Auto Off/sleep/Energy Saving Mode" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check your printer properties.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. Make sure that the printer is connected directly to a socket wall and not to a UPS, power strip or a lightning arrestor. This will cause the printer to drop offline connection and disconnection (checked yes!).

  Additional measures to take if you continue to have the problem (if they are posted)...

• HP Pavilion DV6-2106EA hangs after the insertion of son wired CAT5 (internet)

  HP Pavilion DV6-2106EA hangs after when inserting the cable wires CAT5 for wifi internet works fine

  or wireless works fine. Need help

  Hello

  Unplug your ethernet category 5 cable.

  Download the LAN driver from the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46504.exe

  Then, in the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.
   
  sfc/scannow               (Note that there is a space between sfc and /)
   
  Let the entire process, then the output type and press ENTER.

  Now, right click on the installer you downloaded and select "Run as Administrator" to launch the installation.  When finished, restart the computer and try to connect the cable again.

  Kind regards

  DP - K

• My Disk Defragmenter Hangs After startup

  My Disk Defragmenter Hangs After startup.  I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154.  He only "worked" on windows update and the update to fix issue still exists.  I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

  Hope that gives you enough information.

  Hello

  (1) operating system do you work?

  (2) which Fix - it applied?

  (3) what is the exact full error message?

  Try the following methods and check the status of the issue.

  Method 1:

  Run a scan of the file system checker and check if it helps.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Check a drive for errors.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

• Computer hangs after installing windows updates...

  computer hangs after the installation of update.  Full system restore and the computer worked fine for a week. Has started having problems still... verified and automatic updates for windows have been downloaded and installed today. Confused about where to go from here. Help, please. Thank you!

  To be clear, the issue is not appeared since the updates have been installed one at a time, correct?

  KB2447568 is A compatibility view list update is available for Windows Internet Explorer 8:23 November 2010
  The KB updates a file in Internet Explorer.
  There is a small chance that Trend Micro has a conflict with the update. If this is the issue, then there would be more posts on this topic.
  This looks like a temporary glitch occurred.

  The only suggestion I would make is that when there are a bunch of updates, as there was in December, then it would be better to install the most complex by themselves.
  This would mean that changing setting Windows updates for "download updates for me, but let me choose whether to install them.
  For example, the cumulative update for Internet Explorer, KB2416400, would be installed last, and by himself.

  And, since you pick a time to install updates that have been previously downloaded, then you can install them in groups of 4 and If it is another problem caused by them or their installation, you will be able to refine specific update was the cause.

  Expert MowGreen Windows IT Pro - consumer safety