in windows port forwarding

Similar Questions

• Implementation of IPSec Port Forwarding on a Windows 2012 with a LRT224 Server

  Hi all I hope someone can help me validate my troubleshooting. I'm deploying a Server Windows 2012 that will server as a server vpn for customers. In place is a LRT224 with 4 VLANS set up. I have enabled port forwarding for IPSec (UDP/500), L2TP (UDP/1701) and L2TP (UDP/4500) to go on the server.

  In my Initial test, I put the LRT224 on the same network as the client of my test and realized the Test Client (10 Windows) to try to connect to the WAN of the LRT224 interface. I get this message:

  

  Thinking it could be the configuration of the server, I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  I confirmed that VPN passthrough is enabled.

  The firmware version is by: v1.0.5.03 (February 22, 2016 10:12:17)

  Currently, the firewall is disabled (I would activate once I'm working)

  If anyone has ideas or notice a fault in my tests, I would really appreciate the feedback.

  If additional information would be useful, please let me know what you want and I can work for it.

  Thanks to all in advance.

  FreeFallFour wrote:

  I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  It does normally not as I KNOW because the VPN in an outside in the process. You should test the VPN connection outside the server's IP subnet.

  You have the server configuration that the DNS server in the router to DHCP with DNS Proxy is disabled?

  Are you doing load balancing Internet connection?

• Unable to do port forwarding, to connect to the VPN and install Windows updates

  first of all, I tried to launch a minecraft Server trying to port forward, had problems with this, so I tried Hamachi, wouldn't connect to the VPN, then I tried Tunngle, at least, it was more useful, so I tried to use Device Manager to search for tunngle found when trying to manually install it, then he said that he could not or invaild something (or something of the sort) then it says windows may need to be put updated to fix this problem, so I tried to update to windows and it will not be updated, he is stuck at 0%, I tried the thing to download the patch to update windows and that has not helped,): I DO

  Original title: Windows Update will not be blocked at 0%

  Hello

  Thanks for posting your query in Microsoft Community.

  Depending on your problem troubleshooting to establish a VPN connection, I recommend that you post your question in the TechNet forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope this information is useful.

• Port Forwarding issue with HP Photosmart C7250 / Windows 7 / Linksys router

  Help, please! I worked on this problem with HP, Microsoft, No - IP.com, etc with no resolution.

  I have a 650 workstation DELL computer in office which has been recently formatted and had a clean install of Windows 7 will be of all installed updates. He is running Free AVG 9.0. There is a Linksys WRT54GS Wireless with disabled DMZ and Port 80 (only) active.

  I have installed no.-solution of IP.com for the creation of a hostname to point to my dynamic IP address.

  I need to have Port 80 go to the IP address of my PC so that I can set up synchronization option Wireless of my CRM with my iPhone and Blackberry. Instead, whenever I created the public IP address or host name, it brings me to the Web Interface of my HP Photosmart C7250 printer. Even, I assigned a static internal IP (and DNS) address to the printer (192.168.1.101) but no matter what I do Port 80 goes into that compared to the IP from my PC to 192.168.1.110 which is the IP in my router.  The printer is set up wireless on Channel 6 (WEP encryption).  UPnP is disabled.

  I called HP and they said, there is no place that port forwarding is enabled. This doesn't seem to be the case. I tried to change the internal IP address of the PC to 192.168.1.101, but it had nothing works (could not ping or pull up the Web Interface for HP). I tried to add a different port number and it doesn't work.

  I need Port 80 to connect to my IIS server. Microsoft says that this is but another State Tech that disrupts the HP software. From the HP Web Interface, it is what appears when I type in my host name or public IP address and it's not going to my PC, then I have a tendency to agree.

  FYI... I unplugged the printer and now when I try to ping the public IP address, I always get a response (even after half an hour of the printer being disconnected). Please HELP ASAP! Thank you!!!

  Solution - on secondment in case anyone else ever runs into this.  Update the firmware on the Linksys router did the trick!

  From and upward... FINALLY!

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Port forwarding for EYEMAX DVR on WIn Server 2012

  We use the router as a network controller on our local network. Now, we have replaced router with the server (win 2012 r2 essentials). We have an EYEMAX DVR client software to connect to a remote ip address in the web.

  Previously, I had the configuration of port forwarding router and EYEMAX was working. When we replaced the router with a server that I can no longer connect. I guess that there is a similar setting to perform on a server, but I can't figure out what to do. This certainly isn't a Firewall (when I turn it off EYEMAX still do not work).

  There is a statement (http://site.camtechsurveillance.com/downloads/remoteacc.pdf) how to configure a router to work, but I do not know how to apply similar changes on the server.

  TL; DR.

  How to do the same on the server like here http://site.camtechsurveillance.com/downloads/remoteacc.pdf

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• LRT214 Port Forwarding does not

  First of all, when you create a service in the port forwarding section, why to select the two TCP/UDP has been omitted from the selection must be embarrassing for Linksys.  Creation of 2 services, one for the other for UDP and TCP are bad design.  Would love to see that this problem has been corrected in future updates of the firmware.

  The main problem is I have configured port forwarding services, but I can't get anything to work.  I am able to access remotely to the router using the port 1443 that is configured in a separate section.  I worked in the network design and mgmt for 10 years and why Linksys decided to make the management for the LRT214 so different interface, then the rest of the market was a bad decision.  Is there anything else you can suggest to help out why these ports cannot be opened through the FW?

  On this router logs show nothing.  There is no log for blocked inbound connections and there is a class router business?

  After setting up some boxes of Windows on the local network, then transfer to a custom RDP listening port, I am able to RDP in these Windows boxes remotely.  It verifies that the Linksys router is forwarding ports correctly.  The question then is something on the Synology device itself.  Thanks for your response!

• Port forwarding on WRT54GL does not

  Thanks in advance, trying to track forward setup my linksys WRT54GL allow Remote Desktop from outside your desktop (private static IP).

  I have a configuration of modem netgear in bridge mode (so the firewall is disabled on the modem), and the Linksys WRT54GL Firewall enabled, with "filter internet NAT redirectin" unchecked.

  I also, port rule before the Setup program in the game & Apps, to transfer the TCP 3389 to my office (private) static IP address.

  I make sure firewall is not blocking the RDP traffic, and I can RDP on the desktop to a laptop on the WIFI network.

  But the rest of the world, I can't not RDP using my ISP (dynamic) IP address.  times out.  I don't know that I have the IP address of my ISP at the moment.

  Thoughts?  I present screenshots if necessary

  After further digging... I found the problem, it was with the Windows 7 firewall.

  I made sure 3389 (and RDP application) was allowed on Win Firewall (this is why I could RDP on my WLAN), but for the rule of the RDP, under the "Advanced" tab, I also had to "allow the crossing side.

  It was the first time I set up the port forwarding for a box of Win 7, so didn't even know that this setting exists in Windows 7.

• EA7500 Port Forwarding disorder

  Hello

  I'm having a problem involving using the port forwarding on my new LInksys EA7500 router.

  Everything works well, it works as it should locally, with my Apple TV, Windows desktop and all my phones.

  But as soon as I set up a port forwarding using port 32400 "plex" and the Ip address of my SIN.

  I start getting "failed to retrieve the queue of reading for this element. Please try again ".

  This problem only when I try to use the plex locally, if I use the phone, on my 4g net, everything works as it should.

  But not locally on my LAN/WLAN.

  As soon as I remove the port forwarding, it works locally again?

  Can someone please help me if there is anything I should change?

  / Fredrik

  I think I have it solved.
  I've updated the Plex media server, rebooted, and now it seems to work.
  / Fredrik

• Port forwarding does not work on EA6900

  Please help me to know what is the reason for this port forwarding does not work on my Linksys router:

  Model: EA6900 v1.1
  Firmware version: 1.1.42.161129

  I've set up two ports: TCP 22 and 8070 TCP to 192.168.1.10. (192.168.1.10 is up and running, I can reach the LAN ports).

  Yesterday, I had a live chat with Linksys support we tried to re - download the firmware even, but that did not help. Then factory reset and reconfigure the router did not help either.

  Unchecking "Filter anonymous Internet requests" and disable uPNP didn't help either (they have been suggested in similar topics).

  However, the IP displayed tab troubleshooting/Diagnostics reflect my external IP address (the IP displayed by http://whatismyip.com), which is weird, because I never have IP from my ISP from 100, that is displayed on the Diagnostics tab. So I guess it's a fake display or it relates to access to my router via www.linksyssamrtwifi.com ?

  Anyway I tried the two IPs from the outside, but the transfer simply doesn't work. (It works fine when I use my old router TP-Link).

  Please advise!

  Sorry guys, it seems indeed a double NAT problem. My ISP can detected MAC address change when I started using EA6900 (thinking that I couldn't not need public IP?) and since then he sends me IPs for NAT - ed. It is strange that the same day, he was working with my old router, but now it is even not working with my old router and not even working when I connect directly to my windows PC to my ISP (via PPPoE). I called their support line and they said that they will solve this problem within 72 hours. In any case, thanks for your help!

• Port forwarding on several computers

  Hi I just bought a Wireless Linksys WAG325N router. I usually about 2-3 machines on my network WIFI and I'd like to enable the port forwarding for each of them on a particular port. It is easy to do for a single exact machine - simply type the port number and IP of the computer to the configuration - but the problem is - I would do it for each other: example: enable the port forwarding XXXX for 192.168.1.100, 101 and 102. Help, please? Thank you in advance.

  It is the application load in a sense. You can change the assignment of external ports to resolve the correct internal port on each machine.

  Say for example using rdp that uses (port/protocol) tcp/3389 (RDP client) application actually allows you to change the external port to connect to, if you specify after the investigation period. If for example say we have rdp access to all 3 computers in the outside world. We can configure the port forwarding on every computer

  (Computers)      (internal IP addressort)            (External IP/port)

  COMP A 192.168.0.5:3389 203.x.y.z:3389

  Model B 192.168.0.10:3389 203.x.y.z:3390

  Model C 192.168.0.15:3389 203.x.y.z:3391

  It is the purpose of a router to create routing tables.

  Of course, you will need to remember which ports are assigned to which device.

  It is certainly dependent on the application. Find out if your application or service supports changing the port, ftp, rdp clients, tftp, ssh all do... Most of the 'Good' services are, as those who built it were considered in a NAT environment.

  NAT network address translation =

  Most of the things if not at the level of the applications, services even in windows are tweakable via the registry. I wouldn't say that that if you don't have experience relavent. You potentially make your workstation unusable if you're wrong.

  I hope this helps.

• Help for my new E2500 router port forwarding

  My hosting web home used to work. But due to new ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own router Linksys E2500. Verizon and services of TWC, that I subscribed are dynamic IP address. I use a third party to redirect web traffic to my house.

  TWC gave me a simple modem-router in one box. An entry is coaxial and outputs are 4 ethernet ports. I use one of the 4 outputs of the TWC ethernet box to connect to the internet the E2500 input ethernet port. All my sons and wireless devices are now feeding the E2500. All wireless and wireline devices works and can surf the internet through the E2500.

  I have assigned to one computer as the web server and the internal IP Address of this computer as 192.168.1.128 addess. The same goes for the installer with Verizon before.

  I loaded him comes from CD with the router E2500 and see the LAN 192.168.1.128.

  My problem starts from there, I do not know how to set the port in E2500 192.168.1.128 to web traffic

  1. using the CD E2500, I click on 'APPLICATION AND GAMES', then 'SIMPLE PORT FORWARDING'. under the NAME of the APPLICATION, I select one box for HTTP and type in 128 under "IP ADDRESS". I then click on ACTIVE, then 'save settings '. The 192.168.1 is set in this window, I can type only 128.

  It does not work. I can browse the internet, but can not access my site of all machines using domain name.

  Then I tried:

  2 to point 1 above, I continued to Setup > BASIC SETUP > DHCP RESEVERSATION. I can see the name of calculation/sever and the 192.168.1.128. Then, I click on the "select" and save the customer.

  I rebooted the computer/server, I disconnect and reconnect power E2500. I check the internal IP address of the server, and it's always the same. But I can't just browse my site. I can browse other places.

  No idea what's wrong on my fault? Help, please.

  Your modem is a router. All incoming internet requests end up on the modem/router. You must configure the port forwarding on the modem/router first before the E2500 will see nothing incoming from the internet.

  Alternatives:

  1. turn the modem/router mode 'bridge', which turns into a simple modem. You can connect directly to the internet with your E2500.

  2. place the E2500 as simple access point and keep the modem/router as your main and single router. Then any transmission is made on the modem/router.

• Port Forward question e4200

  I have an e4200 and love it.  Here's my question and I hope that the forum can help:

  Background: directly connected (LAN) is a ReadyNAS Pro 6 Server.  I have a share that is configured to be a very simple through the port80 Web server.  The router is configured to direct all port 80 traffic (for example, http) to the server.  Wireless connected via Port 81 is a dlink (DCS 932 L) camera.  The port 443 (https) is transmitted also to the NAS (admin functions).  To help debug the problem, I created a portforward (1357), also on the NAS for https.  Created static IP: 192.168.1.10 and 192.168.1.11 (for the camera).  I also have a name of domain created by TZO that is active.

  Other port forward: mydlink.com which is a dlink site that allows access to the camera dlink.  I also have a Plex Server (port 32400 I think) that works great.

  Questions: On my network local (inside my house), enter, either http://mydomainname.com or http://NAS IP address gets me to the Web server and the homepage.  With: 81 takes me to the camera; : 443 or: 1357 takes me to the functions of the administrator of the server.  Is... all the works I want it.

  Go outside the home: www.mydomainname.com takes me directly on port 81 and request the login/password for dlink camera (same for www.mydomainname.com:81 and www.mydomainname.com:80). https://www.mydomainname.com takes me to the connection of camera dlink, like https://www.mydomainname.com:443 

  https://www.mydomainname.com:1357 takes me on the server and the homepage and access for all functions.

  I suspect the problem with DLink and mydlink (uses UPNP).  Any help would be greatly appreciated!

  Thank you.

  Thus, it seems that the camera works now. The Universal Plug and Play (UPnP) service in Microsoft Windows use discovery SSDP (Simple Protocol) Service to locate and connect to the services and network devices. There are security risks associated with these services, and on several occasions, these services were responsible for denial of widespread service of the host Windows campus. System and network security (SNS) recommend to disable UPnP/SSDP service on all Windows hosts and activation of the service only when necessary.

• Try to open the port or do port forwarding for update of the game client (improve the download speed)

  I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

  Hello

  Ports must be sent to the IP of the specific computer.

  A specific port can only be transferred to a computer.

  He must be facing forward in the router and also via the firewall software.

  Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

  This site is the champion of port forwarding, http://portforward.com/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• port forwarding for file sharing on the internet.

  I am trying to determine what port numbers, I need to transfer to my router (in virtual server) to be able to share my NAS files over the internet with my friends? I want to use file sharing, have implemented a DDNS on the NAS with a client account to my dynamic IP address, but cannot get the numbers correct port developed to be able to configure port forwarding. Can anyone help?

  Hello

  Open sharing Ports that are used on a local area network on the Internet is a Big safety hazard.

  There are secure applications that are built for this purpose, they use their own ports and generally are safe (as on the VPN or SSH).

  A free quick simple way is shared through secure ftp server. http://FileZilla-project.org/

  An elegant way door application like this, http://download.cnet.com/WebDrive/3000-2160_4-10017919.html

  In general, http://www.practicallynetworked.com/howto/fileshare/fileshare_intro.htm

  Jack-MVP Windows Networking. WWW.EZLAN.NET