Install the driver software view, is it a scam?

Similar Questions

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• J4680 - can not re - install the driver software.

  Problem of impression and he had advised to reinstall the printer software. Uninstalled the program, rebooted & then tried to reload from the original CD of HP Officejet. The operation failed - error message says it could not find a file - and then abandoned. Defective CD?

  Went to site (official!) HP found correct J4680 download for Vista, but once again, unable to finish. Error message: - System cannot find file specified - E:/setup/hpzshlautorun.infice_suffix.exe-m

  What it means?

  What can I do?

  Why used the original work of instant CD?

  Thank you Mario for your answer. The steps that you list are exactly what I did when the error message came. However, the problem is now resolved. When I rebooted, Windows detected my printer as a 'new' device and asked me to load the CD. So I tried again and this time he accepted it and installation is complete. Maybe the CD was slightly damaged but accepted at the last attempt. Must try several times.

  Everything is working OK now.

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• Printer does not work with the driver installed and the error 2081883395 while unistalling the driver software.

  I have a HP Deskjet 3050 J611which a printer prints perfectly wireless or if the software is not installed, although it won't scan without software.  When I install the software, it does not work.  When I try to uninstall the software I get a 2081883395 error, and it will not erase the software.  I managed to download a software that did delete and I reinstalled, have the same problem, but can't find the software to remove the HP software.  I tried to install HP disc and download.  What is a 208 error?  How can I remove this software?  And how to install the software without this error (maybe it can work)?  Thank you.

  Original title: uninstall error 208

  Hello CLARENEWMAN,

  Thanks for posting your query in Microsoft Community Forum.

  As you have found problems when uninstalling the driver, I suggest you to try the next fixit and then try to uninstall the driver.

  The problems that the programs cannot be installed or uninstalled

  After uninstalling the printer driver, install the full software features for your HP Deskjet 3050 has e-all-in-one printer - J611a from the link provided below.

  HP Deskjet 3050 has e-All-in-One Printer - J611a drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=CA&product=5061092#n175

  Note: Select the architecture of Windows 7 in the above link.

  You also try to run the troubleshooter printer for that matter and check if it helps.

  Open the printer Troubleshooter

  Check also:

  Windows wireless and wired network connection problems

  Solve printer problems

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Cannot install the driver HP Photosmart C6180 and software problems-, yet get HP-related crashes

  I had a lot of crashes with my main PC, a number related to HP, including at startup ("your computer has recovered from a serious problem") and close (the HP software responds only to not close).  I reformatted the system, reloaded Win XP Pro disk and all updates.  I couldn't reinstall the HP drivers and other software from my CD or after you download from the HP site.  The stalls of process at an early stage (only in step 2), sometimes blocks your PC when it does.

  The last time, I filled the experience HP online questionnaire and noted that I thought I had a generic problem rather than related to HP.  However, checking details on the Microsoft error report, I discovered that after the start I regularly get the message:

  HP Installer Recovery plug has encountered a problem and needs to close

  Error signature

  AppName: hpzrcv01.exe AppVer: 7.0.0.71 ModName: msvcrt.dll

  ModVer: 7.0.2600.5512 Offset: 00036fa3

  Download of HP is about 76 Mb.  I have on my C drive (System) of a program file HP/Temp with 7 Mb and on the E partition where I wanted to install the drivers and other software a program file HP / Digital Imaging, 30 MB.  Both are dated yesterday, when I finally tried to install from a download.  The HP printer is not displayed under the control panel of configuration/printers, or the Add Printer Wizard can recognize it on the network.  (I have not tried to disconnect the router and connect directly to the PC, but that shouldn't matter to software problems, should it?)

  Any advice would be welcome.

  Thank you once again, Dexter - it was a Microsoft problem rather than a problem of HP, I finally found and installed the right fix MS and just installed the HP software - to be on the safe side, I only did the essentials of basic printing and left the other stuff for later.  And I'll report this "resolved" if I can find the button after validation!

• HP LaserJet Pro 100 color MFP: install the driver for color laserjet MFP m175a pro 100 failed at about 83%

  When I connected the printer to the system recognizes it as a cd player.

  I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg.

  UAC is disabled and .net framework advanced fetures is not installed.

  I see an error in the event viewer, without and the error number:

  Message: The object of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
  Source: mscorlib

  Hey @yechiel-adar,.

  Welcome to the Forums of HP Support!

  I understand that your color HP LaserJet Pro 100 M175a multifunction fails to install on your computer Windows 8.1 as the computer recognizes your printer as a CD drive and the installation fails at 83%. I would like to help you to solve this problem today. To be honest, it sounds like there is a conflict between your computer and the HP Smart Install feature. Smart Install is a feature that has been programmed into the new models of Laserjet. It allows you to simply plug a USB cable and the installation files will load on your computer for you for faster and easier installation. However, on some computers systems rather find recognizing printers printers rather than software CDs. In this case, the installation never ends with success that your computer never actually detects the Laserjet Printer. That being said, I'll guide you through a few steps below to resolve this issue.

  Please, disconnect the USB cable from your computer before you continue.

  Step 1: Disable Smart Install:

  1. On the front panel of your printer, select the button Setup (key)
  2. Right arrow to the Service menu , and then select OK
  3. Right arrow key for Smart Install and select OK
  4. Please turn OFF Smart Install

  Once Smart Install turned offshore, please proceed to the next step.

  Step 2: Uninstall the drivers:

  For the purposes of troubleshooting, it is crucial that we have a clean slate to work with. Even if your ever successful installation there is a chance that a part of the software package and the pilot has made its way on your computer. To ensure that there are no problems when reinstall us your printer, I'll first you remove all traces of your printer from your computer.

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen, type programs and features. Click on programs and features to run
  3. In the window programs and features will populate a list of the programs installed on your computer. Please scroll down and look for your HP Laserjet. If you see the Laserjet listed please select it and choose Uninstall
  4. Follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.

  Step 3: Delete the temporary files:

  1. Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
  2. On the start screen please type run. Click on Run to launch the run dialogue box.
  3. In the run box, type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. R ight, click on the recycling bin on your desktop and select empty recycling bin

  Step 4: Install the device:

  1. Please click here to download and run the installer full feature software and driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your HP Laserjet Printer
  3. Do not connect the USB cable until the installation window invites you to

  Once the installation is completed successfully, please test print to confirm that your product works as normal.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• do not install the driver for XP photosmart 5510

  I tried in vain several times to install the driver for my refurbished XP for my laptop HP photosmart 5510. I said I want to install via radio - he finds the printer and lets me select - then it starts the installation.  It gets about two-thirds through the bar of "installing network printer." "and crashes.

  I let it rest, go to walk my dogs, prepare dinner, and it moves of there.  When I click on cancel, it crashes during the phase cancellation and I'm relegated to "force quit" process.  It's annoying!  All I want to do is wireless printing.  Scanning the computer would be an asset.

  BTW, I had NOT of PROBLEMS installation on laptop of my wife under System 7.

  Help, please... Thank you

  Docswan

  Hi docswan,

  I can't wait to hear that you are experiencing installation problems.  The following steps may resolve this problem. You can also view documents related to this issue by clicking here.  If you are unable to install the full features software, a generic driver can be installed via windows to enable printing only.  Here is a link that will provide the steps to do this.  Click here

  1. connect a new printer.

  2. the software freezes when "control network.

  3 allow software to sitting there for 3 minutes (to fill in the background).

  4. go into the Task Manager process tab.

  5. complete the process of HP network Communicator.

  6. This should push the software to a point to choose wireless or Ethernet.

  7. Select Ethernet or wireless depending on connection.

  8. Enter the IP address manually in the appropriate box.

  9. the software freezes probably during the 'network of control' all or part way through.

  10 allow software to sitting there for 3 minutes (to fill in the background).

  11 go into the Task Manager process tab.

  12. end of the process of HP network Communicator.

  13. This should push the software before saying that the printer cannot be installed correctly, but can be installed via the IP address.

  14. click "continue".

  15. the software should continue and give a green check mark.

• Portege Z930 - new Windows 7 and installing the driver

  I have a Toshiba Portege Z930 Ultrabook.

  I don't use it for a while because he was very very slow when navigating or attempt to perform other tasks. I scanned the system with several antivirus (now I have Avast and Fixila, but I also used Kaspersky and Norton) and nothing came.

  Now, I decided to reinstall Windows.
  So, I received a kit of Windows 7 Pro (it's the license granted with the laptop) and I'm fighting for a week to make it work properly.

  Now seems as graphics card does not work, I have most of the hard disk full some old files of windows, etc, etc.

  1. How is the right way to install a new version of windows on this laptop (without the old installation files) and use the accessories available on the laptop (graphics card, fingerprints... tool)

  And YES, I tried all THE drivers available on the Toshiba support successfully section only for the wireless card.

  2. have you had problems with the speed?

  Thank you
  Victor

  Hello

  > Now looks like graphics card does not.

  Does that mean exactly? Graphics card is recognized correctly in the Device Manager?
  In case it is, the driver is installed and works of the GPU.

  What Portege Z930-xxx are you?
  The exact part number might be useful to check the specs of the laptop.

  By the way: the driver / software installation is not very difficult.
  Forget the other Toshiba software if you n t want to install it
  Pick up the pilots only...

  However, some parts of the software as a value-added Package must be installed because this package installs a range of important public services.

• Satellite P100 - display problem after installing the Samsumg software

  Hello

  I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

  I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
  Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

  I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

  I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

  Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
  Thank you very much
  Ivan

  Hello

  This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

  I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

  Have you already solved your problem or you are still looking for the solution?

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• Installing the driver on the Qosmio G20

  I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

  XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

  acoustic silencer V1.00.005A
  help V1.02.00_TINASSIST_NUER20MA
  --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
  --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
  Toshiba bluetooth stack V3.3.10.01 BUILD20041209
  Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
  Utility Intel chipset software installation V6.1.0.1008
  common modules V6.02.04
  ConfigFree V5.00.48
  controls V3.16.2400
  display the change of aircraft V1.6.0.0 utility
  NVIDIA geforce go 6600 display V6.14.10.7118 driver
  Hotkey to display V2.8.0.0 - 00 - XP
  fix for "cumulative security update for ie ' Q834707
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for 'windows firewall only my network (or subnet)' KB886185
  --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  SM214710AD2 Toshiba software modem
  V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
  PC V3.1.0 diagnostic tool
  development of picture V2.7.0.2 utility
  V7.05.04 energy saving
  Toshiba V1.00.0013 for NUR20 raid driver
  utility RAID V1.2.0.25
  SD V2.0.2.1A memory card format
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U
  --> NOT INSTALLED sun java 2 runtime environment V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  utilities V4.20.26
  Virtual sound v1.00.05UPDATE
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45
  Intel wireless b/g V9.0.1.9 lan driver
  utility V2.0.0.20C zoom

  In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

  But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

  I have a feeling that the problem is related to the utility Configfree or be WIFI.

  I tried to uninstall the Configfree but the problem is still there!

  There, can someone help me? !!

  Hello

  You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
  I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

  Good bye