Is this OK to clone brand new machines to save time?

Similar Questions

• Brand new Lenovo G780 BSOD

  Dear Lenovo support,

  Yesterday, I bought my first laptop Lenovo, Lenovo G780 brand new. I installed Windows 7 Ultimate 64 bit. Immediately after installation, guess what, I am Blue Screen of Death and one more like 15 minutes ago. I have only 2 GB of RAM, and I noticed that the system often maximizes memory and have zero available RAM. What is the reason for BSOD? Can I upgrade RAM to 4 or 8 GB? What RAM I wait, DDR3? Please give me some advice or recommendations on what do I do? Thank you. I just, I can't accept that this is happening to the new machine.

  Hello, NINE.

  Well, I tried to disable the UEFI boot and then re - enabled again because no specific change occurred. No BSOD so far. I assumed it was a RAM memory because I remember BSOD message was "memory cache" or "cache manager. I will modernize just the RAM to 4 GB. Suppose I have two ram slots.

• Brand new HP 2000 running very slow and delay horribly

  I just bought a brand new HP 2000-2b19wm a little more than a week, and first on the first commissioning initial he did very well apart from the fact that windows 8 and is very difficult to learn and navigate. I've noticed since the first boot of the computer is awfully slow. Takes forever to load firefox after clicking on it, horribly slow to load any page.

  I'm in the process right now to remove Norton of it and all the other programs that I feel as tho have no need to be there to see if it helps with the performance of the machine.

  I live whomevers help on some options or steps I can do to avoid or correct what's wrong with this brand new machine! I read online that a system restore would not be a bad idea as well.

  Thanks for any help.

  Shannon

  Hello

  If the computer is infected with the virus, making the system restore would remove all infected files. Pick up the virus deleted, you need to reinstall the operating system using the system recovery.

  http://support.HP.com/us-en/document/c03489643

• brand new portable 15 hp won't start

  Hello.
  We went today to a Hp 15 laptop, he has been in charge for a while and won't turn on at all.
  The power light is on, the charging light was red... Blue turned after a while and the caps lock light keeps flashing... But the screen still does not turns on, there is also no noise from the machine... Can someone please advise?

  Hello

  My best advice, considering that it is a brand new machine with what looks like a hardware problem, would be to take it to the retailer, it was purchased at and get a replacement.

  Kind regards

  DP - K

• Acer computer brand new with problem BSOD in Windows 8

  Hello

  I bought this computer Acer Predator brand new and I'm getting BSOD related reboots.

  Could you please check my minidump file and give me advice?

  Or I'll take the computer as the hardware and the software is under warranty.

  Concerning

  https://onedrive.live.com/redir?RESID=734A709756E8E767%21140

  Yasin

  Hi John,

  We have several audits of bug:

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)

  This indicates that an attempt was made to execute non-executable memory.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Verification of error 1E, {ffffffffc000001d, fffff801af0bb63e, fffff801af363800, 2}

  0: kd > fffff801af0bb63e ln
  (fffff801'af0bb600)   nt! KeReleaseInStackQueuedSpinLock + 0x3e |  (fffff801'af0bb670) nt! KeResetEvent

  ^^ The exception is produced in nt! KeReleaseInStackQueuedSpinLock. This routine restores the original IRQL that the operating system saved at the beginning of the call to KeAcquireInStackQueuedSpinLock .

  KeAcquireInStackQueuedSpinLock increases the level of IRQL at DISPATCH_LEVEL level during the acquisition of the spin lock.

  If we check the IRQL at time of accident:

  0: kd >! IRQL
  Debugger saved IRQL for processor 0 x 0-2 (DISPATCH_LEVEL)

  ^^ Very well, we're right on the money in the measure of the level IRQL go... but why an exception occurred here on this pretty normal routine? My guess is we had a DPC/lock and the system deadlocked. It could be both material.

  TIMER_OR_DPC_INVALID (c7)

  This is issued when a timer kernel or deferred procedure call (DPC) is located somewhere in memory where it is not allowed.

  This problem is usually caused by a driver, not to cancel a timer or a DPC before freeing the memory where he resides.

  ---------------------

  1. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  2. remove and replace McAfee integrated Windows Defender in Windows 8 for temporary troubleshooting purposes as it is probably cause conflicts:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  3 if the two above fail, return the laptop ASAP for a new replacement brand as then it is a hardware problem. No brand new laptop should be planted in all circumstances.

  Kind regards

  Patrick

• Windows Explorer crashes on me for no apparent reason. Can I solve this without restoring my laptop brand new factory settings?

  Yesterday I bought a new PC laptop Asus X53U and a few hours to get home, Windows Explorer has started to randomly crash. This happens whenever I try to browse the files on my computer using Windows Explorer. The original error report (from 14:50 26/12/2011) is as follows:

  Description

  Application of vulnerabilities path: C:\Windows\explorer.exe

  
  

  Signature of the problem

  Problem event name: APPCRASH

  Application name: Explorer.EXE

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7a144

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c8f9

  Exception code: c0000005

  Exception Offset: d 00000000000532 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 2057

  Information additional 1:9227

  More information 2: 9227af1e56b2326cc34fd252f87d48f5

  3 more information: c05e

  Additional information 4: c05eab96ec5c3a8ddc29336ac9c795e2

  
  

  Additional information about the problem

  Bucket ID: 25714140
  The most recent accident occurred at 16:04 today. The error of this crash report is as follows:
  Description

  Stopped working

  Application of vulnerabilities path: C:\Windows\explorer.exe

  
  

  Signature of the problem

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d672ee4

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c8f9

  Exception code: c0000005

  Exception Offset: d 00000000000532 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 2057

  
  

  Additional information about the problem

  Bucket ID: 32430540
  I would really rather a solution that does not perform a recovery of the system, but at this early stage in the life of my laptop BRAND NEW, I'm willing to try anything.
  See you soon.
  EDIT: maybe I should mention that this accident occurred 21 times between 16:05 and 14:50 yesterday today!

  My apologies if you have already seen this, but have you seen the 'sticky' - http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-explorer-has-stopped-working/6ab02526-5071-4dcc-895f-d90202bad8b3

  If all goes well she can help him, but if not, I'm sure that the expert will be "smart".

• in 2012, I installed acrobat pro on a HP Pavilion.  This machine is dead and I would like to transfer acrobat pro on my new machine

  How to install acrobat pro on my new machine?

  Hello

  Please find the link below to download:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

  Hope this helps!

• I own in Design 6.0 and my old machine died. I want to download and install InD 6.0 on my new machine. How can I do this?

  I own in Design 6.0 and my old machine died. I want to download and install InD 6.0 on my new machine. How can I do this?

  Download and Installation Help-
  https://helpx.Adobe.com/download-install.html

  http://www.Adobe.com/downloads/other-downloads.html

• I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my one Adobe

  I try to install Lightroom 4 on a new machine, but the media are hosted by Adobe.  I can see my license number but do not see the option for download.  Y at - it a link to the downloads for this media on the Web site?  It does not appear in my Adobe account.

  Adobe - Lightroom: For Windows

  Adobe - Lightroom: For Macintosh

  Mylenium

• Laptop is not repairable, so I got a brand new

  With all due respect,.

  I have a dilemma on my upgrade from windows 7 Home premium.
  Well, I bought a laptop brand new in January 2010. His pre installed OS is Windows Vista Home Premium.
  I got the coupon for the upgrade to Windows 7 Home Premium, and I bought the upgrade. Suddenly my laptop stopped working at the end of July (2011). It is under warranty and the service took my laptop. After a long time they told me it could not be repaired and they offered me a new laptop, the same model. But this model has Windows Vista Home Premium and I want to have Windows 7 again... I bought this laptop because there is an option to update. It is not my fault to not be repaired. So now my question is: what can I do now?

  Can I use the same disc for the upgrade, because the model is the same. And what to do now when this new serial number will not be the same thing?

  Please help me what to do... I was not blamed for the crash from laptop to the title of the warranty period. I just wanted to have Toshiba again. And now I'm worried what to do...
  Thank you very much for your support and your time.

  Yours faithfully,
  Ann

  Hello Ann

  Of course, you can use this disk to upgrade. you have the same machine that one use this old drive and install the upgrade on the same way as on the old machine.

• HP Pavilion 17 Laptop Touch t: brand new out of the box HP Pavilion 17 t Touch M7H91AV laptop is so slow

  Last night, I took my laptop HP Pavilion 17 t Touch brand new out of the box and it is so slow.  The startup is slow.  All operations running slow.  The use of the internet is slow.  I tried to transfer files from Carbonite on this new computer and just the process of realization of this installation took me a half hour.  This morning I had to reboot and it took 5 minutes.  I only know enough about computers to be dangerous, so I don't mess with many settings myself.  This performance unacceptible on a new computer.  This is certainly the slowest computer I've ever owned.  All solutions that anyone can offer (as a reminder, I need instructions step by step)

  MLubb

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about serious problems with your HP PC brand new and wanted to help.
  
  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• HP Envy 15 t-as000: brand new HP Envy w / SSD: "Boot Device not found".

  Hello

  I have a brand new (less than 1 week) HP Envy 15 t-as000 w / a 256 GB SSD.  After the impeccable behavior for 1 week, the laptop can be started is no longer.  No boot device is detected.  If I try to run a diagnostic on the hard disk, the BIOS I was informed that it can not detect even a current hard drive (see image)

  I don't know what happened.  I'm very careful with my machines.  He has not been abandoned. It has not been dropped on, or taken any sort of somehow.  I just pressed the power button one day (yesterday) and I see this:

  

  Thanks for the tips. I followed your recommendations and sent the laptop to HP for replacement (I bought this unit directly to the output from the HP website).

  However, I am frustrated because after all taxes and transportation costs, I had to pay an additional amount of $10.  The total general of the replacement order was $739,79 against $730,90 for the original purchase.  Why am I penalized $ 10 ($8,89 to be exact) for a mistake that was not even my fault?

  Also, I had to pay $24,83 FedEx packaging to send the laptop back.  How was I supposed to know I should have brought the Moose with me to Seattle, WA in Ithaca, NY packaging because the SSD was going to fail in my college dorm?

  So in the end, my HP Envy $730,90 now goes to the identical replacement of cost unit $739,79 + packaging from FedEx $24,83 phone = $ 764,62.

  Bottom line: screw - up HP cost me $33,72!  Not the end of the world but still a ringing sound nice when you're not yet a career with a cushy salary of mickael elite.

• Can I migrate vista windows of a dead to a new machine?

  Recently, the hard disk went on a laptop I bought in 2007.  I had been running Windows Vista.

  To replace it, I'm Mid-building a new PC, and I'm price of BONES.  Like almost everyone, I would like to avoid paying the full cost for windows 7.  So, while it may be a long shot, my question is this: is it possible to switch the license for Vista my old machine, death has a brand new (for the purposes of backup and just get the W7 upgrade)?
  Sorry if this is silly and my thanks!

  If your copy of Vista comes with the laptop, then no, you cannot migrate to another computer.  Windows OEM copies are related to the motherboard of the computer, they are provided with and may not be used on another.  If you bought a copy of Vista retail, then you can transfer.

  If you create a custom computer, you will need to purchase a copy of the full license of Windows for that.  Do not buy an OEM System Builder copy from a retailer like Amazon or NewEgg.  OEM SB packs are for custom builders, selling computers to customers.  A person who built his own computer is not a builder of sytem as defined by the Microsoft license program.  Such a person is a do-it-yourselfer.  The correct license is retail.

  Don't buy Windows 7 on a discounter in line, the Amazon Marketplace or eBay.  The internet is full of counterfeits produced in China.  They are very good imitations, as you can see in this video:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

• brand new in box hp officejet 4630 guard indicating a paper jam

  I tried to install a new hp officejet 4630.  It indicates a paper jam (where no paper jam exists) the machine is impeccable.  Should I return it to the store for a new. I tried everything including a power reset.

  Hi @weezer2,

  Welcome to the HP Forums!

  I noticed that your brand new out of the box HP Officejet 4630 keeps showing a paper jam. I'm sorry to hear that, but I'm happy to help you!

  Please, try the solutions in this guide, a "Paper jam" error on the HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If you have gone through this guide, and the paper jam persists, the printer must be replaced. You can go to the store or you can contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope that answers your question and have a nice day!

• Brand new Windows 7 system: battery plugged in, not supported

  I just got a brand new Acer Aspire 5542-1462 with Windows 7 Home Premium pre-installed. I have almost exclusively while plugged operated. Battery in the notification area icon indicates that the battery is at "97% (plugged in, does not support)." How can I get the battery charge? Is there a threshold above which it does not load? Some features of the system if they will help you:

  AMD Athlon II X 2 M300 2.0 GHz
  4 GB OF RAM
  ATI Radeon HD 4200 graphics card
  battery Li-ion 6 cells

  My power profile is balanced with the only change so that everything always remains that plugged while. This is my first Windows 7 machine after years with XP, so I am new to the operating system. I searched around the internet and here and can't find anything.

  Hey,.

  This is how it works:

  1. When you turn on your laptop, if your battery is more than 95%. you will get the message "connected but no charging current.

  2. When you turn on your laptop, if your battery is less than 95%, you will see the message "blocked and charge" until the battery reaches 100% (not 95%). That is why sometimes, even if you see that your battery is at 97% and load, this means before starting your laptop, the battery was less than 95% and reached 97% since then.

  Apart from the above explanation it seems some problems with the mentioned error. So, try the following steps as well.

  1. click on Start and type device in the search for field, and then select Device Manager .
  2 expand the category of batteries .
  3. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose Uninstall .
  WARNING : do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.
  4. on the taskbar of the Device Manager, click on Search the hardware changes .
  You can also select Action > search the hardware changes .

  Give that a try!

  $C God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart