LaserJet 1102w: wireless printing

Similar Questions

• HP Laserjet 1102w: my HP LaserJet 1102w not print large documents via wifi

  Hello, I have two HP LaserJet 1102w news. I installed and configured via the wi fi and it the test page prints correctly.

  The problem is when I try to print large documents (with more than 400 KB). In this case the printer says "print...". "and in the printer, the green light flashes but not print the document. If I print small documents, it works OK.

  If I do a ping to the printer with packages of more than 8 000 bytes, I get 'timeout for this request. If I do a ping with packets of 8 000 bytes, I get the answer in 5-6 ms.

  Both printers has the same problem. I have different devices connected to the local network, and it all works well. I have another printer that works well with large documents... so the problem is not the configuration LAN or WiFi.

  What can I do? Thank you!

  Well, I solved the problem.

  I'm going to 'devices and printers-> right click on the printer-> properties-> Advanced tab printer' and check 'installed the driver. In my case, there is no "HP LaserJet 1102w", who is the best driver. So I remove the device and has installed, and I get the right driver "HP LaserJet 1102w.

  Now the printer works OK.

• HP Laserjet 2430TN wireless printing

  I have two of the above printers and need to know if there is a map available for this printer wireless so I can communicate wirelessly with it.

  If not, is there a way to make this printer wireless via a router or something else?

  Thank you!

  Hello

  Please check parts (ktis wireless) from the following link:

  http://www.printerworks.com/catalogs/HP-LaserJet-2400/2400_SupplyAcces.html

  You can use internal or external cards.

  Happy new year.

• HP Laserjet CP1025nw: wireless printer

  My Hp Laserjet CP 1025nw does not recognize the modem.

  Hi @Novice_62,

  I see that you have problems with the printer not recognized on the wireless network. I will definitely do my best to help you.

  There is no wireless setup for this model, so we will have to uninstall and reinstall the printer software to set up the wireless back on the printer.

  Restore the default settings of the printer.

  Reset the printer to factory default settings.

  Print a configuration page to make sure that the IP address is back to 0.0.0.0 and the name of the network SSID is disabled.

  Uninstalling the printer software.

  HP LaserJet Pro CP1025nw color printer drivers.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• LaserJet 1102w: force print the second page, Laserjet 1102w

  Hello

  New laptop.  I can print fine from the front.  When I try to print double-sided printer, as normal stop, after that the first page is complete, but used 'popup' support to continue does not appear.  OK, I'm working on this one.  But is it possible that I can press something on the printer to say "go ahead, print the second page."?

  Thank you!

  Evan

  Hello @evanmjones,

  It is a great place to get help! I read your post and see that you do not get the option "Continue" to print the second when the double-sided page. I want to help you solve this problem.

  You can continue the second page by opening and closing the printer cover. (this model does not have a resume button)

  Make sure that manual duplex printing option is selected from the printer driver:

  1. Click on the Windows icon (), and then click devices and printers.

  2. Right click on the HP product and then click on printerProperties.

  3. Click the device settings tab.

  4. The manual Duplex allows to "Enabled" and click OK to save the change. (click on the + to expand the list)

  Ensure that the bidirectional Support is enabled.

  Go to start, devices and printers, right click on the printer, the printer properties, click the Ports tab, put a check mark next to allow bidirectional support.

  You may have to restart the computer.

  Try to print again.

  If you're still having problems, try printing from another application to see if you have the same results, it could be a setting in the application of double-sided printing.

  You need to maybe uninstall and reinstall the printer if the problem persists.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Multi-page printing on Laserjet 1102w

  I use a HP Laserjet Pro printer of 1102w wireless on a home network.  The operating system is Windows 7 (64-bit).  A computer print very well and the other prints multiple pages of a single page document.  I checked the settings and I can not just understand what is the cause.  I tried to uninstall the printer and the software and reinstalled.  He moved so easily and that a page will be printed when you do a test page, but if I print from Word, I get as much as 50 and as low as 10, but never just.

  If someone is familiar with this printing problem, please get back to me as soon as possible.

  Thank you!

  Hi, on the computer that prints multiple copies

  go to devices and printers

  Right-click on the icon of the 1102w printer

  Printer properties

  Ports

  Uncheck the box "enable bidirectional support".

  Click APPLY

• ColorMFP LaserJet M175nw 100: connect printer Laserjet 100 wireless

  Due to the recent DDOS acctack on servers DNS of Dyn Corp, it was recommended that all passwords and secret phrases on routers and Internet all devices be changed. I did this on all my devices and I'm successful with the exception of the 100 Laserjet Printer.  When you use the arrow keys on the printer to access the "network" Menu, I get a response indicating 'Access disabled Menu'.  I also have this same answer for the configuration of the system and Service.

  So I correctly uninstalled the printer and tried to reinstall it.  In doing so, I am only able to put in place as a USB printer and not a wireless printer.  Trying to set up as a printer wireless Configuration utility see the SSID of the router and then when he's in the Install utility installation fails.  I turned off and unplugged from the computer, printer and router and re-run the routine without success.

  In my view, if there is a way to set the default printer, it will disable the block on access to the "network" Menu on the control panel of the printer and then I would be able to configute the operation it's wireless.  I would also appreciate other possible solutions.  Thank you!

  Hello @burtech,

  Thank you for your participation in the Forums of HP Support! After reading your post, I see that you need to reset the printer. I want to help you with this issue today.

  I can provide reset for you in the product Monograph.
  In the forum next to our name to handle just click on the envelope
  to see it.

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

  You can click on the button 'Accept as Solution' and the 'Thumbs Up' for my efforts. Please let me know how it goes. Have a great day!

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• LaserJet p1505 for connection wireless printing

  I have a Laserjet P1505 (not 1505n) a Net Gear N600 dual band Router router with USB port and printer. I tried to connect the printer USB cable to the USB port on the router and installed the printer on the laptop (a Windows Vista) I'm trying to save up for a wireless printing capability. The updated drivers from HP Web site, set to turn on printer 'sharing' but the printer does not appear in the network and sharing Center. Have directly connect the printer USB cable to the computer laptop USB port to print from the laptop.

  I missed something or cannot print via the router P1505 (without the "n")?

  Thank you

  I found a post where a similar problem has been resolved. The user has enough to show what he has done to help others like you. I hope this helps.

  OfficeJet 7210 won't install with Netgear N600 router

• deaf new laserjet 1102w made noise when printing

  I just bought a laserjet 1102w to replace an old laserjet 1002. The fact 1102w one muffled loud noise every time it well a piece of paper causing the Office to shake.  Is this normal with this printer now or make me a defective printer?

  Hey Stafic,

  I would like to go ahead and launch HP Hardware Diagnostic Utility to see if it is able to determine if there are hardware problems. You can download the tool here: HP Hardware Diagnostic Utility

  Run the tool and post back with updates.

  Thank you

  Sean

• HP laserjet pro m521dn mfp: HP jetdirect 2700w USB wireless print server connectivity

  I just bought a M521dn Pro Laserjet and a Jetdirect 2700w.  However, the M521dn has only a USB port that does not recognize the Jetdirect.  However, the Jetdirect 2700w is listed as an accessory for the M521.

  The Jetdirect 2700w works with the M521dn?

  Is there a hidden usb port, I am not find to connect to the wireless print server?

  Help, please

  Thanks in advance!

  Hello

  HP jetdirect 2700w USB wireless print server support M521 series including M521dn. Your printer has 2 USB ports, one on the front (use for direct printing without a computer) and the normal port is at the back (not flat port, I usually call it as 'round' port' and you need a normal/standard USB printer cable to connect to the Jetdirect 2700w (round end in the printer and the flat end to the Jetdirect 2700w).)

  

  Concerning

• HP Laserjet Pro P1102w printer: HP P1102w wireless printer will not pair with a SBG6782-AC Motorola Wireless Cable Modem Gateway

  I already had Internet AT & T U-verse using a Wireless Modem Arris IPDSL NVG510 gateway.  My laptop HP running Windows 8.1 and the HP LasrJet Pro P1102w wireless Prnter systematically and automatically connected to the wireless network NVG510 with no problems over the past two years and the wireless printer works without problem.

  I recently replaced the Internet AT & T U-verse connection a connection of Mbs Comcast Xfinity Intrnet 25, using a Motorola Arris SURFboard SBG6782-AC Wireless Cable Modem Gateway.   My HP under Win 8.1 Pro laptop connects to the network and access to Internet without any problems what-so-ever.  However, the HP LaserJet Pro P1102w wireless printer connects to the wireless network and I can't print at all from my laptop.

  I tried all the suggestions P1102w Wireless Configuration of the printer on the HP printer Support Site, but nothing helped.  I've also updated the firmware of the printer and Loaded the latest driver Installation & full product software.  I tried and re-tried these suggestions over the past two days, but without success.

  I would be very appreciately all help experts in this Forum.  to get the printer working wirelessly, since we also wireless print to this printer of IPads and other wireless laptops.

  Hi @Atmasin,

  I see that you have trouble connecting the printer to the new router. I want to help you.

  I would like to reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  If the network name has spaces or special characters, the printer may not recognize it.

  The printer is able to send/receive in the 2.4 ghz band.

  If it is set to 5 GHZ network, you may need to change to 2.4 ghz. (rename the 5 ghz or turn it off)

  The WPA key setting must be on AES to work properly not TKIP.

  Multi flow must be enabled.
  Router firewall must be open for printer ports.
  If you have Mac filtering give you printer hardware to meet the needs of the Configuration page.

  You may need to contact your router company to get help to check these settings.

  Try to run the Configuration Wizard wireless of the HP software to set up the printer on the network.

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• LaserJet 1102W Pro - can't get the blue light at all

  I do the initial installation of a Pro LaserJet 1102W.  I created another without difficulty.  After a reset to the default values and an update of the firmware, I can not even a flashing blue light indicating the necessary wireless configuration.  Tried with and without USB cable.  I get the status lights will blink for 10 seconds and then back to solid green light.  I tell myself that I need the blue light blinks then I can connect via Wi - Fi to set up.

  I believe on this model if you press the wireless to the printer and the (protected web configuration) WPS button our router that they should connect automatically. Then, you can use the installation package and the type of connection appropreiate for the printer on the computer.

  Is there anything else that could help you?

  Happy holidays!

• LaserJet 1102W: HP1102w network connection

  I bought a Laserjet 1102W to connect to a wireless network in a home to the Portugal.  This network is provided by a router Huawei 4 G and the printer will not connect to this topic - is there a solution?

  Hi GraemeM1,

  Try this to connect using WPS

  1. press the button of the router WPS (if you do not have this button, you need to access the router configuration: lots of info online)
  2. press the button on the printer and a blue light wireless flashes repeatedly
  3. When you get a solid blue light your printer is connected to the network

  Hope this helps.