Lenovo ThinkVantage Toolbox has stopped working

Similar Questions

• Lenovo B560 Bioexcess has stopped working

  My venus B560 with factory installed Bioexcess Fingerprint Reader. It was working fine until a few days ago. He still works on all Web sites, but does not work when I connect to my PC. There is no (bioexcess) icons on my login page more. There is no password stored in my Bank of PW. I went through all programs of "Help" located on the BioExcess site with no results. Can someone give me advice on how to fix this? I am a newbie, please go easy on me. Thank you!

  have you tried to reinstall?
  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_show_4087.html

• Cannot run Lenovo System Update error tvsu.exe has stopped working

  Original title: tvsu.exe has stopped working

  When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

  TVSU Application has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
  Thank you

  Thanks, Eddie!

  I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

  I'll try to post on the site you posted. I'll post here if it helps.

• Bluetooth Lenovo S10e has stopped working - device not found / not recognized USB device.

  Hello

  For no reason that I know, installing bluetooth on my small S10e has stopped working.

  I noticed a few times when stop I had a "BTstackserver" does not message.

  I use the laptop to download regularly from a device compatible bluetooth.

  Today, when I go to connect, it says "bluetooth device not found".

  "Verify that your device bluetooth is properly connected and turned on".

  Hardware manual displays the config of LED and is correct, that if I press the "Fn" keys and "F5", I get the menu to turn on and off both the wireless and Bluetooth. I can turn on and off Bluetooth and wireless both with this menu option, BUT when I activate the bluetooth, I get the message 'one of the USB devices attached to the system is faulty or is not recognized.

  I deleted the Bluetooth installed and re-installed software by using the two bluetooth install files published on the list of drivers on lenovo S10e. Neither one works. I know that you need to install dir C:\DRIVERS once Setup has finished unpacking.

  I tried several other obvious things but without success. I also enabled "Bluetooth coopération" in the wireless LAN settings.

  All I can do now is get to the Bluetooth device under the keyboard cover and take a look at that? Anyone who has any suggestions until I get out the screwdriver? (The unit is out of warranty).

  

  I received my replacement bluetooth module and installing it, bluetooth is working again.

  I keep getting "BTW stack server" stopped responding when stopped down, but this does not seem to cause any problems.

  Too bad that original bluetooth module did not survive barely a month after the end of warranty date...

  I'm used to a greater reliability of Lenovo.

• Windows live photos has stopped working on my LENOVO windows 7 PC.

  When I try to open "Windows live photo gallery", the site becomes blurred, and I get a pop up saying "Windows live photo gallery has stopped working".

  I clicked on "find an online solution & close program", and I get nothing. Under 'View problem details,' he said 'The problem event name' - APPCRASH: name of the Application - WLXphotogallery.EXE and a ton of stuff after that.
  I downloaded all the latest security news, and that did not help.
  Someone has any idea how to solve this problem?

  I came across a somewhat acceptable 3-step solution to the problem of the photo library to break with the message, "Photo Gallery stopped working" shortly after the start. This workaround and the problem it addresses only apply to computers with AMD or ATI graphics cards.

  1. Use Windows Explorer to navigate to the following folder (Win + E).
     • %ProgramFiles%\Common Technologies\Multimedia ATI
  2. Rename the following files in a temporary thing. For example, add "-off" at the end of each name. Note: these files may appear without ".dll" at the end, depending on your system settings.
     • AMF-wic-jpeg - decoder32.dll
     • AMF-wic-jpeg - decoder64.dll
  3. Restart Windows.

  AMD is rumored to have a fix on the way to a bug in the driver files. But, this work around 3 steps will be likely welcomed by fans of photos, until that day comes.

  Note: After you apply this workaround solution your computer may encounter minor performance problems. And, if you update or reinstall video drivers AMD/ATI, the roar of the Gallery of photos can reproduce until you reapply this workaround solution.

  I want to give credit to the one who first developed this work around. But I got used with no citation provided.

• ThinkPad E520 - camera has stopped working

  Hello

  I have been using the utility of Communications (Lenovo - Web Conferencing) when I bought the laptop a few months ago, everything was fine. But now when I press F5 (shortcut key for camera options) there is a pop up with massage "Utility Communication UI hand has stopped working".

  Everything is fine in Device Manager.

  Is this a hardware problem? Is there a way to check?

  Surgeries wrote:
  Hey, Ante.

  try to install the utility of communication as well as pilots of the unit; Then go to http://support.lenovo.com - download both software and reinstall.

  It's the first thing I did, and it did not help.

  After some troubleshooting I finally decided to use Windows Recovery - restore the system to an earlier time, I went up to what worked Communication Utility (camera). I had save steps 3 and 4.

  I think that the problem happened after I uninstalled a few programs of Lenovo ThinkVantage (Toolbox; Power Manager and access connections).

  I hope this helps someone...

• Power Manager has stopped working - BadImageFormatException - resolved

  Moderator note: there is no way to mark a simple/first post as "resolved." I moved from belgam sabermanat 2nd position so it can be tagged accordingly.

  Thanks for the report.

  Z.

  Tale of woe and recovery.

  I recently acquired an i7 ThinkPad x 201 with 8 GB of RAM and 500 GB drive

  I did a fresh install of WIndows 7 Ultimate x 64 with SP1

  I ran Windows Update and applied the fixes about 80 - all the critics and most of the other

  I downloaded the Lenovo system update and install everything except the BIOS updated as the current BIOS is identical to my other x 201 BIOS Version 1.37 (6QET67WW) - I prefer not to do an update of the BIOS, unless absolutely necessary.

  The Manager toolbar of power present in the taskbar, but I can't start to eat.  Or I can it starts application tools ThinkVantage or by pressing Fn - F3.

  Each of them immediately to bring up a Windows error dialog box that says Power Manager has stopped working.  The splash screen appear not at all.  The details are:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: pwmui.exe
  Signature of the problem 02: 1.0.0.0
  Signature of the problem 03: 4f626f8a
  Signature of the problem 04: PWMUI
  Signature of the problem 05: 1.0.0.0
  Signature of the 06 problem: 4f626f8a
  Signature of the 07:378 problem
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  The Version of the file is the same as my other x 201 (1.0.0.0), but the closing date is Thursday, March 15, 2012 02:53:40 while on my other machine is October 3, 2011 23:01:27.  The update is also 15/03/2012 whereas the other machine is 04/10/2011.  It seems that Lenovo rebuilt the package in March 2012.  Manager supply on the other machine says it's 3.64.  The Lenovo site (http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-61432#power) lists 3.64 but when you go to the download page it says it's 6.07.  I tried to uninstall Power Manager and install the 3.64 one from the download site.  The same problem.  Finally, I uninstalled the power manager and installed the 3.40 version I downloaded when I got to the other machine.

  So, how Lenovo released a package with a picture of the wrong file?

• iTunes has stopped working / Win10 64

  Hello

  I have a problem running iTunes on 64-bit Windows 10. (Lenovo Thinkpad Yoga 12)

  As soon as I click on the iTunes Store tab, the program crashes and I get the message "iTunes has stopped working, Windows is checking for a solution to the problem..." and after a few seconds he said "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. »

  I have already tried:

  Complete uninstallation of all programs Apple, including the deletion of all files, and then reinstall it.

  If I do this, the installation fails. He tells me that the bonjour service cannot be started.

  That's why I opened archive installation with 7-zip and has just installed iTunes and support the application. That worked well, but I still get crashes.

  I don't know what else I could try and you'd be grateful for any help!

  Thank you and best what is the Switzerland

  Jonas

  The 12.3.3.17 version seems to cause problems for some people. It may be best to roll back to the last version of iTunes that has worked for you. then wait for the following. See the programs installation of iTunes to download links. If you're back from 12.3.3.17 to 12.3.2.35, then you must also restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library.

  TT2

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• Button ThinkPad 8 Windows has stopped working

  All of a sudden the Windows button has stopped working (no haptic feedback). The Tablet works otherwise, I can always power on it by the power button / stop. Unfortunately, the button power seems to be fragile and probably collapses when it is used on a daily basis.

  Someone has an idea if possible otherwise remedy that is rented for a month in the repair? A loose connector, or something like that? I don't think that it may be a software issue.

  Thank you.

  First Windows button has stopped working, but now, after several weeks, the touchscreen so. I got replacement touch screen cable AP HM 00, 124 of the Lenovo service replacing the cable has solved.

  I guess that's a design flaw , because the cable is longer than it supposed to be (see photo) so it becomes distorted and there caused by a variable pressure on the bottom when cover stand by the fingers on the lower part of 3 mm approximately. Fixation by band does not help, because it always "bubbles" somewhere I hope that this will happen again sooner or later these other two cables (audio connector and display) is not the issue.

  

• RTFTrack has stopped working message followed computer crash

  I have a Lenovo Edge 15 (got 11/03/15). Recently, when using SKYPE, making a video call, a box has developed indicating that RTFTrack has stopped working. The screen becomes white, then the computer crashes. So my call is disconnected, my computer restart and I have to log in again, open SKYPE, etc. What happened 5 times in the last three weeks. What can I do to fix this?

  Apparently RTFTrack is from Realtek Semiconductor and RTFTrack appears in my Start Menu and begin to start my computer.

  I appreciate your help with this. Thank you.

  I updated my driver of the camera from the 20/03/15 update driver on Lenovo's Support page for my 15 Edge and the problem has not yet appeared. I'm keeping my fingers crossed.

• Windows host process (Rundll32) has stopped working

  Is a general Vista problem and also a general problem of Thinkpad, but it has what I feel to be a frequency among the W500s so I thought to post it here.

  In recent weeks, I got this error (Windows host process (Rundll32) has stopped working) several times. A lot of googleing will tell you that it can be caused by a number of things, for example other video programs, Nero burning software, video codecs and burning software and the ATI catalyst control center.

  For me, uninstalling the ATI catalyst control center and the rest of the correction of the error of video card drivers. Resettlement has reduced. Uninstall them and then only by reinstalling the driver first, then check catalytic Center later after another reboot all reinstalled successfully and also got rid of the error.

  However, two days ago I updated my lenovo Power Manager and after the next restart, I started getting this error again. I tried the trick with video drivers, but this time I was not so lucky. Uninstall them completely is not even get rid of the error. I think only it is the new power manager I uninstalled everything and somehow got rid of the error.

  I'm about to reinstall the power manager and I hope he's not bring error.

  Another thing, I found that can cause this error:

  I'd just do a fresh install of vista and lenovo apps + Manager supply and everything worked. Since I never use the optical drive, I went to the Device Manager and disabled, which gave me the error Rundll32.exe about 60 seconds later, and this caused again Manager power to stop working, even after that it recharges.

  I finally understand that disabling my optical drive Springs somehow this error on me which then also stops Power Manager. The optical drive from the reactivation got rid of the error immediately.

• "Repair of system application has stopped working".

  Hi, I'm hoping to get help with an error message that suddenly started appearing on a regular basis. In recent days, the following message if poster every time that I turn on my computer, before that I even click on anything whatsoever.

  Repair of system application has stopped working

  
  

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: UpdateMonitor.exe

  Application version: 4.20.729.0

  Application timestamp: 488e9107

  Fault Module name: StackHash_e52f

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: e52f

  More information 2: e98dfca8bcf81bc1740adb135579ad53

  Additional information 3: 860f

  Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635

  No matter what I click 'close' or 'check online for a solution (recommended)', the dialog box WILL NOT GO AWAY. I was going to do a system restore, but I have only two restore points and both are from today, so that obviously is not going to help.

  It drives me crazy and I don't know that this is not a good sign for my computer either. Help, please!

  Thanks in advance!

  -Renata

  
  

  Hello

  You use a Lenovo computer?

  updatemonitor.exe is an application of Lenovo.

  I suggest that get you in touch with the manufacturer for a better support.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

  Using Win 7 Home 64 bit:
  After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
  Auto check solution online does not come to the top with a solution
  the screen is black nothing happens.

  I opened in safe mode, same problem.

  the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

  Request of guid, how to solve this problem. The problem started last night.

  The laptop is Lenovo G550
  Operating system: Win 7 64-bit service pack 1 - home edition

  I can email a screenshot is necessary for the InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  OS Version:6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information 1:c785
  More information 2:c785ae48d9bd3e84e80fe64557c132ac
  Information additional 03:58 d 5
  More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

  Hello

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver
  • System files on your PC can be damaged or do not correspond with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  Try the following steps:

  Method 1:

  Try the steps of error: Windows Explorer has stopped working

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note:

  Ignore them perform a upgrade in Place the link above.

  Also ignore the safe mode and clean boot.

  Method 2:

  We will try to start the computer in mode low resolution and check the status of the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  You can also check: why is my screen black when I start Windows 7?

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  It will be useful.