Linksys WRT1900ac DOCSIS 3.0 compatible?

Similar Questions

• Router Linksys WRT1900ac - unable to access the USB drive shared on the WiFi 5 GHz

  Hello

  I have a strange problem. I use my Linksys WRT1900ac for almost a year and it works great. There is a USB hard drive plugged into it and I have no problem to access the data. I brought a new desktop computer that is compatible 5 GHz. All my other devices are connected trought 2.4 GHz.

  When I connect my computer to the 5 GHz WiFi network, I have access to the internet and any other player shared the router. It I connect it to the network 2, 4 GHz, it works. The 2.4 and 5 GHZ networks have the same configuration. The only difference is the SSID. I added 5g at the ent of the 5 GHz one.

  I really don't understand why I can't access the shared drive of the 5 GHz network and it works on the 2, 4 GHz. I forgot something?

  Thanks to anyone who can help!

  It could be that when you connect to the 5 GHz network, your PC is set to public and therefore discovery network is disabled, then you are not able to see the drive.  Just throw it out there.

• Linksys WRT1900AC bad speed on 5 GHz network

  I have been using the Linksys WRT1900AC for several months now and the speeds used 20-30Mbps network 2.4 GHz and 80 - 100 Mbps on the 5 GHz network. But recently, the speed on the 5 GHz network are only able to go up to 20Mbps and turns usually around 10 Mbps. However, the 2.4 GHz network keeps always between 20-30Mbps.

  I tried everything but the 5 GHz network and I still cannot improve for it. Any suggestions?

  Just info by addition, the modem I use also, forwards compatible speeds of 100 Mbps. I tested it and it is always gives 100 Mbps speeeds.

  Thank you.

  Hi @haoquan5,.

  He must have a faster speed when connected wireless to the router. I suggest to configure prioritization of media and set the speed at which you acquired your provider of Internet Service in Kbps. Then it is better to Support WMM commissioning and click OK.

  

  Refer to this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=c5eb07acbf81411084edca16a1dd97ec_KB.xml&pid=80&res...

• R5 - 471 T - 71W with wireless card Atheros QCA61x4A unable to reach linkup with Linksys WRT1900AC AC

  Hello, I have laptop Aspire R5 - 471T - 71W with the NIC of the Qualcomm Atheros QCA61x4A wireless. I have the Linksys WRT1900AC wireless router configuration to support the chain of 80 MHz, I have the latest Firmware & drivers for installed devices. Run Win10 pro on the Aspire. Even in the same room that the WRT1900AC router, longs it reached only 802.11n connection speed. How will I know if I'm actually in 802.11ac and Win10 falsely reported my connection speed using the details of the network & sharing Panel as 300Mbps?

  Hello Jordan,.

  Thanks for the pointer... I had two bands with separate SSID. Channels of communication were also in automatic. What I didn't have was the network Mode in the joint framework. Documentation of Linksys seems to be lacking on how these parameters affect the configuration of the WRT1900AC AC speed.

  I am now at 866,3 Mbit/s.

  Thank you for your prompt and accurate diagnosis of the root cause.

  Steven Sutherland

• Linksys WRT1900ACS shows all the ports that are open and firmware restore.

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  b. making a portscanning on the Linksys WRT1900ACS for the internet I found that several ports where free.

  When I went into the Setup, I get only portforwarded 20/21.

  I could access my internet QNAPS 3 + more.

  But the router WRT1900ACS didn t show this when it has been planned, why?

  I now that the QNAP may change the port settings, but I do not have "done this or asked for it", but why it does not appear

  When I log in the WRT1900ACS via Smart Wi - Fi.

  (can not see all 3 QNAPS when I use my linksys EA6500 router.)

  c. After you have determined the B. I tried to Flash the firmware with the firmware OPENWRT. But now I can access the WRT1900ACS and the WiFi is not charged more. The normal router works. How do I get:

  D: flash the original firmaware (via lan)

  e: what OPENWRT firmware has GUI and can be recommended for WRT1900ACS and where to download?

  f. are there links to og to youtube which is very imnformative to do this?

  Thank you

  John

  [email protected] wrote:

  Hi bought a new Linksys WRT1900ACS and has the following questions.

  a. How can I determine whether version hardware version 1 og 2.

  Thank you

  John

  This must appear on the label of the product below.

• Lack of network of 2.4 Ghz on Linksys WRT1900ACS

  I set up my new Linksys WRT1900ACS yesterday.

  Originally, I created two networks Joy_5 and Joy_2.4. Everything worked.

  My Fitbit balance don't like underscores in SSID so I changed the two networks to joy.

  Since then, I am unable to do * nothing * frequency of 2.4 Ghz.

  I did a factory reset, and I tried all channels. The interface seems to think that there is a network on the band but can see no external device (I've tried laptops and phones).

  I've attached a screenshot of the current settings.

  Joy2 network (the current name of the 2.4 Ghz network) cannot be seen by any device (even when right next to the router).

  I don't know what else to try. It is currently the choice between return the router as defective DD or WRT giving a go...

  

  I does look like it is defective.

  Some wireless devices will be confuse previous wireless networks to which they connect. In general, you can get them to forget or remove networks remembers previous. Rename the SSID something completely different should circumvent the requirement of Forget.

• Port before 1723 Linksys WRT1900AC (VPN)

  I can't establish a VPN tunnel to my desktop using PPTP (built in vpn windows) machine.

  I have a Linksys WRT1900AC, latest firmware (1.1.8.164461)

  I implemented the single port forwarding (this machine has a static ip address below):

  

  I can ping the machine externally, but when I telnet as the machine and the port number (EXTERNAL telnet. IP 1723), his look is no (external).

  I have disabled the windows firewall (although all ports and the gre are defined in the case). I even disabled the firewall of the router to test and helped passtrhough:

  

  I did the research strongly, and the only thing I can think is a NAT behind NAT issue? (Not too well known in network). But I'm not on a DSL modem is a modem cable (Charter company).

  I'm stuck, I know that the VPN tunnel does not work because the port is not listening, but how can I get?

  Thanks in advance,

  Scott

  Yes, the IP address that starts with 192.168.x.x is a private LAN and non routable IP address.

  Your ISP Modem must also be a router with a DHCP server.

  Two Options:

  1. Configure the Modem for Bridge Mode or DMZ
  2. Configure the same port forwarding rule in the modem to the IP address of the WRT1900AC (192.168.44.x). If the modem passes to the WRT1900AC which redirects to the PPTP in Windows 8 Server.

• Port before turning off wi - fi on Linksys WRT1900AC

  I have a Linksys WRT1900AC router. I tried to port forward Port 53 (UDP and TCP) and wi - fi wireless was turned off. Anyone know what my problem is? Is there any solution for this?

  In addition, I have forwarded port Port 3074 (UDP and TCP) as well as Port 88 (UDP) without any problem on the WRT1900AC.

  I don't know about that.

• Linksys wrt1900ac - FTP address changing constanty - it drives me crazy!

  Hello!

  I enabled the FTP server. Everything works fine, BUT:

  How can I stop the router from its address of the FTP server constantly evolving? This is the first 79.222.11.35:21, then after a few days 79.222.18.68:21 and so on.

  Every day is different, which means that it is difficult to work with. This behavior is costing me a lot of nerves and brings a lot of trouble. I have stock for customers on the hard disk that is attached to the wrt1900 and I myself can not access data when I need it. The irony is - I bought the router due to its internal functioning of the FTP server, but now - it is unusable.

  No idea how can I stop this?

  concerning

  PS: I do not know if this is relevant: the hard drive is powered by USB and goes into standby mode if you do not - I like this behavior.

  kosmoface wrote:

  "The latest version of the firmware does not open the FTP server side WAN (Internet) of the router." The previous firmware was a security issue where when was activate the FTP all the files are available in the side Internet without security. »

  Please help me out here: This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac? Which means I need a ftp server or NAS extra homemade for that?

  And I found this:

  Linksys WRT1900AC supports the DynDNS.orgproviders, TZO.com and NO - IP.com .

  Which means that I have TO use these providers and nothing else?

  Answers to your questions:

  1. This means that I can't basically give someone a direct link to its share on the FTP Server internal wrt1900ac?

  Yes all I KNOW with the Linksys Firmware Ver.1.1.8.161917 the FTP server does not allow access to the WAN (Internet)

  2. which means I need a ftp server or NAS extra homemade for that?

  You can flash OpenWRT McWRT and have access to the server FTP WAN on the WRT1900AC

  3. the Linksys WRT1900AC supports the DynDNS.org, TZO.com suppliers and NO - IP.com . Which means that I have TO use these providers and nothing else?

  Yes, but with OpenWRT McWRT you can use any provider.

  -----------------------------------------------------------------------------------------

  Read the Wiki home page if you decide to go forward with OpenWRT.

  https://github.com/Chadster766/McWRT

  https://github.com/Chadster766/McWRT/releases

  https://github.com/Chadster766/McWRT/wiki

  https://github.com/Chadster766/McWRT/issues

  Use the well known to start default settings. I recommend only change the SSID and passwords of wireless security until you become more familiar with it.

  Wireless information is not provided in the router, the user interface, but you can get that from the connected devices.

  If you need assistance with configurations of OpenWRT thanks for posting in the OpenWRT thread at the top of the forum.

• OfficeJet Pro 8600 Plus: cannot connect wirelessly between Officejet Pro 8600Plus and Linksys WRT1900AC wireless router

  Bought a new Linksys WRT1900AC wireless router.  Followed the steps of wireless configuration and connected successfully as verified by "results of analysis of the wireless network.  However, I am still unable to print/scan/fax.  Receive a message indicating that the printer is unable to connect to the server.

  Check the following:

  The blue light next to 'Wireless' suspends on printer.

  The INSTALLATION of the SCREEN ON the PRINTER (after the installation Wizzard wireless):

  IP address: 192.168.0.199

  Network name: golfer

  HostName: HPEB4DD8

  MAC: 444:1e:a1:e9:40:d7

  Direct Wireless: Off

  HP PRINT and SCAN DOCTOR:

  SSID is correct

  The signal strength is 'Excellent' @ 95

  Security-enabled = Yes

  Security type WPA2 =

  Connected = No

  Frequency = 2.4 Ghz

  No problem with previously connected D-Link DIR - 655 wireless router.

  Seems strange that any "passesses" by the results of the wireless network Test.  Yet, still unable to connect.

  Looking for any help.

  Thank you

  Mark

  Finally a resolution...

  I tried running an ePrint of New York telephone, and it worked, but still no luck wirelessly from the PC printing.

  He said that the WiFi was indeed working.  So, I did a search for new firmware and found that there was one in April of this year (2016).  Downloaded and took a chance on install.  To my amazement, it is actually installed on the printer without any connection "connected".  Who told me that there is an existing wireless link.

  Once the install is complete firmware, I tried to print a worksheet Excel from the PC, and it actually printed!  I have to assume there was something in the formware upgrade which allowed the router from LinkSys (WRT1900AC) to communicate fully and to work with the PC.  The router was published in 2014, so maybe it was.

  In any event, everything is in fully working again.

  Man y thanks to all who have shared their data entry.  I hope this could help someone with a similar problem in the future.

  Thanks again!

  Mark

• Linksys WRT1900AC dead after the weekend

  Hello people,

  Strange problem with my WRT1900AC. I've updated to firmware 1.8 last Friday. Everything worked very well and smoothly. As I was away this weekend, I stopped the router Friday night.

  Restarted Monday morning came bright Power Internet and back on light (white difficulty United). But that's all. Wi - Fi LEDS remained offshore. GUI of router is not accessible via the portal smartwifi... I tried to plug the router on another access DSL than to have the same problem.

  Tried a reset with no luck. Looks like the router is brick. Any help would be greatly appreciated!

  Looks like the auto-reset router itself. All of my custom settings have disappeared. Have to go through the installation of SmartWiFi once again...

• iMac connects to the router of Linkysys WRT1900ac

  I am trying to help a friend get his iMac 12.1, that is running 10.11.4, to connect to a new Linksys WRT1900ac router.  The router is a novelty in this House, is in the same room of 10 x 12, as the computers listed below, and the installer was using the Linksys recommends the method, which is to let the Linksys to make adjustments.

  Here are its configuration;

  The router is connected to a cable modem, ISP and the following devices are connected to the router and works well;

  Via ethernet

  Windows 10 PC

  AT & T cell phone extender

  Ooma VOIP

  Wireless

  iPhone

  iPad

  Notebook PC

  While troubleshooting my MacBook 5.1 also allows to connect without problems to the Linksys router.

  Note that her iMac connects without problem to the wifi network Netgear Guest unprotected from its neighbor.  I also installed in his room my 1st generation Airport Express, which has added a second wifi network but without access to the internet and his iMac connect without problems to this wifi.

  Here are the steps I took to try to solve this problem, and they were unsuccessful;

  ➔ Scanned for malware/adware with Malwarebytes and found nothing.

  ➔ Ransacked after the files in/Library/Preferences/SystemConfiguration and restarted

  com Apple.Airport.Preferences.plist
  NetworkInterfaces.plist
  Preferences.plist

  ➔ When the previous did not work I trashed all the files in the folder/Library/Preferences/SystemConfiguration except "com.apple.boot.plist', which would not remove and rebooted

  ➔ Created a second user account and still not able to connect to the Linksys router

  ➔ Repaired permissions

  ➔ Created a new location in System Preferences > network and added the OpenDNS addresses and in the material value MTU 1453

  ➔ restarted in safe mode and not still could not connect

  Firmware on the router Checked ➔, which is updated

  ➔ Reset SMC

  ➔ reinstalled El Capitan via the App Store

  That's all I could think about.  I'm puzzled.

  I checked the router and everything seems ok, but I'm no expert.  There may be something I'm not contagious.  I have seen that he has no MAC filtering set up in the router, so this isn't everything.

  Please tell me if there is something that I'm on.  Is there something in the router, that I need to change?  There are other files in the Mac, I need to delete?  Is there any other troubleshooting steps I can take to identify this problem.

  Any help would be appreciated as it is a total mystery to me.

  There are a lot of variables, but start with some basic info. So on her iMac, if you click the wifi at the top right, you can see his router listed?

• Ookla Speedtest App WRT1900AC reliable?

  It's frustrating to use WRT1900AC speedtest.  First, sometimes it loads up, other times, it's not. It takes a lot of time for the application to respond.  Then, comes the unreliable speed test.

  Linksys WRT1900AC registration constantly speed test my connection as a 1 - 3Mbps for download speed and 0, 5Mbps in upload. This prompted me to complain about my ISP, and in turn, they admitted that they might have a few problems themselves.

  But when I use the Web (speedtest.net) Ookla speed test, the airspeed was until my ISP advertising (25Mbps both from top to bottom).

  Basically, a test showed 27Mbps, the other about 9 to 27 times slower to download. While the differences between the result of the upload is a staggering 54 times.

  Why such a huge difference? Anyone know the same thing I do?

  SpeedTest on the router is... not completely reliable pants!

  Execution of a connected local network client for a real measure of your WAN speed.  If you run it on WiFi, the results may well be affected by problems in the Marvell WiFi drivers.

• WRT1900AC is capable of 100 / 100 Mbit/s speed wide band?

  I'm looking for a new router to connect to my cable modem.

  In my research, I found the Linksys WRT1900AC. What I can't find in the specifications, is the flow.

  Can someone tell me what I can I wait for a download speed of the Internet (debit) with normal use (with the security/firewall enabled) this router?

  Yes, the 1900AC of Linksys WRT is capable. My speed from my ISP is 500 Mbps both up and down and I consistantly get these speeds via a LAN connection. My lan speed is usually between 500 to 522 download and upload of 500 to 590. Here is my speed test

• Attached storage WRT1900ACS issue

  Hi all

  Just picked up the WRT1900ACS yesterday and am in love but I have a question about external storage attached to the unit. The router has the capability to format the disc attached? If this isn't the case, the reader (3 TB), the format must be formatted in?

  Thank you

  Hi, InfernoST. Thanks for choosing the Linksys WRT1900ACS. We appreciate that you enjoyed. The router does not have the ability to format the attached drive. The functionality of the supported file systems only supports FAT, NTFS, and HFS format.