Matshita dvd-ramuj-850 s dose not read or write or read a dvd

Similar Questions

• Carpet * a DVD-RAM UJ-850 s does not read blank media - need new firmware

  Hey I have a laptop Equium only around the age of 4 months.
  Had nothing but problems with the CARPET * A DVD-RAM UJ-850 s ATA Device drive.
  I need to know where I can get the update of the firmware.

  Firmware for it, that she will not read blank media.

  I agree with master... I don't know what kind of problems you have, but if the player doesn't work properly, it must be replaced. The warranty is certainly valid and the nearest authorized can help you with it.

  Maybe you made a mistake. Take your laptop to the nearest service and show them what you mean exactly. Here, we can only speculate what may be your problem.

• Satellite A200 - Mat * randomly a UJ-850 s does not read certain DVD or CD

  Hello

  I have problems with my dvd player Mat * a UJ - 850 s (firmware 1.40)

  Randomly, he's not reading certain dvd or cd.

  I called Toshiba support and they asked me to update the firmware.

  I explained that there are 3 updates of firmware for a player of TSS (NEC) DVD from Toshiba Web site but * NOTHING * for MAST * A

  They asked me to install the Toshiba disc reboot before sending to repair. Today I had time to fix it, but it does not read the startup disk!

  So I ask for Toshiba to publish an update of firmware for Mat * a UJ - 850 s

  What you mean under some CD or DVD?

  It is well known that something like this can happen. Because of this if you write here on self made CD/DVD, use empty brackets just high quality.

• Equium A200-1V0: DVD-RAM UJ-850 s does not read data discs

  My laptop seems to have decided to stop reading data disks.
  However, there is no problem with the audio CD, but when I insert a data disc such as the software considers the disk is empty and try to format the drive.
  I searched internet day for solutions and tried without success to the following:

  Removed the UpperFilters and LowerFilters in the registry.
  Uninstalled and reinstalled drivers.
  Bought DriverWhiz (waste of money!)
  Tried to access disc command prompt that generated the message "incorrect function".
  Tried to use the enforcement function and access an exe file that I know is on the disk, but it comes up saying I need to format the drive
  Uninstall service packs
  I even thought it might be something to do with the MagicVirtual drive I had installed so I uninstalled completely which
  I uninstalled real player

  I'm about 3 minutes to destroy my laptop so any help would be appreciated.

  Laptop: Equium A200 - 1V0
  Drive DVD - RW: MAST * a DVD-RAM UJ-850 s ATA
  OS: Windows Vista

  Hello

  Deleting upper and lower filters was the first idea that I'd like to share with you, but it seems that you have already tried this solution proposal

  How about windows boot CD or a linux live CD?
  Is this possible?

  If not then I thing that the question could be linked to the wrong material work I m thinking on the issue of laser lenses eventually the laser lens can not calibrate properly and this could be a problem

  In this case, only a replacement CD/DVD drive can help greet

• supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

  Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

  Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

  I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

  I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

  I tried the registry filter entries delete and it does not correct.

  The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

  DVD with files on them are not read.

  I cleaned the drive with a DVD-rom cleaner.

  Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

  Combustion works very well.

  Hey, Arch.

  I suggest uninstalling the drive in Device Manager and restart the computer.

  If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

  The Powershell do not install cannot be bound.

  I suggest to run a full system scan after you have updated the antivirus definitions.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Matshita DVD-ROM UJ-850 s ATA does not have all the drivers are up-to-date

  Title of the Moose: Matshita DVD-ROM UJ-850 s ATA

  I can run no longer THAN CD/ROM s on my Toshiba laptop because I don't have the driver for it and I have no idea how he return to WG.

  Hello

  ·         What exactly happens when you try to play a CD/DVD?

  ·         You receive an error message during playback of the CD/DVD?

  I suggest you run the fix it provided in the link below to fix the problem.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  You can also follow the manual for troubleshooting steps described in the link below and check if they help to resolve the issue.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Vista does not open a cd/dvd using MATSHITA DVD-RAM UJ-850 s ATA Device

  my laptop has a MATSHITA DVD-RAM UJ-850 s ATA Device. but it does not open a cd/dvd. Why?

  Hello

  1 recently, you did changes to the computer?
  
  Method 1. Uninstall and reinstall the cd - dvd drive.
  If the drive is not listed, remove and reinstall the existing drivers.
  To do this, follow these steps:
  a. Click Start and then click Control Panel.
  b. click System and Maintenance, click System and then click on Device Manager.
  Note that if control panel is in Classic view, double-click System and then click on Device Manager.
  c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  e. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.
  After the computer restarts, the drivers will be installed automatically.

  Method 2. The firmware was updated.
  I would also recommend updating the firmware of the CD - DVD drive.
  You may need to contact the manufacturer for it.

  I hope this helps.

• This device cannot start. (Code 10). Matshita DVD-RAM UJ-850 s ATA device not found.

  The operating system does not detect the Matshita DVD-RAM UJ-850 s ATA device on my Toshiba Satellite. I tried Microsoft Auto difficulty and it didn't fix it. The CD player worked last week when I installed ITunes software. Now, the driver cannot be detected. Known corrections or suggestions?

  You must uninstall, then reboot and let the program installation is the device when it restarts. If the correct drivers are found, it will install. In case of failure, it's probably because Search Setup default is files of the user and not the C:\windows\inf or directories c:\windows\system32\drivers\, which you can specify by choosing to install from a list or specific location, and then by typing or by going to the it. If this fails, check the bios settings.  But most likely your original driver was silently replaced, by a program system file or a third-party application. If need be, you can try a system restore to return the parameters of your system to a point in time where everything worked. I would try one more point to restore and not a newer version, preferably a restore point launched machine, not one caused by installing or removing a program or a driver. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Matshita DVD RAM UJ850s ATA optical drive will not read burned media, running Vista

  * original title - CD/DVD unit read not "burned" cd *.

  Hi, there are about 6 weeks, I had to do a recovery because a virus in my PC, the problem is that now the optical unit reads no CD, it reads 'original' CD, DVD (original and burned) but not burned CD specially those who have programs on them, could be a driver problem, but so far I have not been able to solve the problem , and I m not sure the original driver are in Sony's site, or any other Web site.

  PS the thing Burns CD and they can be read after that that they were "closed".

  I have a VAIO VGN-N330FH, running Vista Home Basic 32 bit (Spanish), the model is a Matshita DVD RAM UJ850s ATA Device.

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• DVD drive not read/write

  my dvd drive not reading/writing.its a matshita dvd ram uj - 850 s .windows vista sp2.sony vaio vgn ar 550u.its showing the CD/DVD I insert as empty. someone help?

  Hi dt6789,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/57d84d2b-5dd5-4f37-BADC-9e784a24211c

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Hi, my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work

  Even I am facing the same problem.

  I have a lenovo y410 laptop. my DVD MATSHITA DVD - RAM UJ 875 S ATA does not work... it is not reading all discs... not to burn all...

  When the problem occurred I immediately called the customer... but as the phones warranty period I can replaced also do it... Please help me with a solution...

  This is what happens when I insert a disc in the drive... the led flashes for a few seconds... the disc seems to move but then the led stops blinking and nothing happens...

  I have tried both what is the necessary changes in the REGISTRY & also uninstalled the software and restarted my laptop. But the problem is still there.

  Please let know me of any other way to solve this problem

  Hello
  
  I suggest you run the fixit and see if it helps:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• Matshita DVD-RAM UJ880AS does not

  Matshita DVD-RAM UJ880AS works not properly, will read the DVD etc, but does not burn. Ran Microsoft solve this problem, has not solved the problem.

  Hi Hopkins3329,

  I dare say that the drive had a lot of work on the burning aspect of it, and laser could have in that there is a laser to read and burn...

  Concerning

  GT4U

• Acer L3600 not reading not dvd player

  Hi I have an Acer L3600 desk top with a dvd Matshita UJ875s drive\r\nand it does not recognize it (last week, I put a dvd in there a TI read and nothing after that) can help you. Unfortunately frustrated thanks john bunch

  Hello

  You see the DVD drive in Device Manager?

  To open Device Manager:
  a. Click Start.
  b. type devmgmt.msc in the start search box and press on enter.

  You can follow these steps and check if it solved the problem.

  Step 1:

  Run the Fixit tool from the following link:

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/GP/hardware_device_problems

  Step 2:

  Run the Fixit tool from this link:
  http://support.Microsoft.com/kb/982116

  Step 3:

  If the drive is detected, but it does not read the CD or DVD, then run the Fixit tool from this link.

  Your CD or DVD drive cannot read or write media:
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  
  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• Re: Qosmio G20: DVD-RAM UJ-845 s does not read CDs or DVDs

  I'm a big supporter of Toshiba product.

  Please help me

  Given that I had to do to update form my * Toshiba Qosmio G20-123 *.
  My * DVD UJ-845 s * do not read any CD or DVD.
  Before that, he worked a lot of good. But unfortunately now, he does ' t read anything.

  The system to recognize it. The driver is installed and working properly.

  After I installed supports DVDRAM of Toshiba.
  The same thing occurs when playing a CD, the system tells me:

  * E: / not accessible *.
  * incorrectness function *.

  I try with a program on the net but no way.

  I was well able to put the original firmware, but I could not find.
  If someone can do a dump of the original Firmware for me it will be a miracle for me.

  Help, please.
  My great respect.

  I think I can help you:

  Go to my computer right click on the CD/DVD drive.
  Now go to properties; Click the Recording tab and check "Enable CD writing on this drive".
  Now click on apply and restart the laptop.

  Check of workaround and post comments