My color laserjet 2860 only print in b & w on network based computers.

Similar Questions

• Color Laserjet 2605dn: duplex printing with UPD

  The universal print driver that runs on Windows 10 (64-bit) does not recognize on my Color Laserjet 2605dn duplex printing function. drivers passed under older versions of Windows enabled this setting on the Advanced tab.

  Is there a way to enable or UPD grants only limited functionality and does not support the duplex feature?

  Hello

  in devices and printers click on the right button the printer UPD icon and select printer properties.

  In the device settings tab, verify that the accessory set duplex as installed and check for the difference.

  Please let me know if this can help,

  Shlomi

• HP Color LaserJet 1600 Laser printer does not

  After I installed Windows 7 instead of Vista on a 64-bit HP laptop, I had problems with my printer (HP Color LaserJet 1600 Laser Printer).  The test page works well, but some applications, such as the Windows Photo Viewer that comes with Windows 7, produce nothing but totally black pages when I try to print photos (it's black, not white).  The strange thing is that, if I insert a picture in a Microsoft Word 2007 page, it prints well!  In addition, other applications are unable to make use of the printer, such as Adobe Reader 9 and Adobe Photoshop Elements 7, who refuse to recognize the printer.  Is this a known issue with a solution?

  Hello

  I suggest you to follow the methods and check.

  Method 01:

  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 02:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Printer laserjet CP1215 color range. Only prints B & W cartridges but the colour.

  I have a color laserjet CP1215 printer. I set the printer to print only black and white and it prints only black and white. Then why my cartridges color short ink? Thank you

  Hello

  Thanks for the post.  I have attached a document below may have useful information regarding about printing with your CP 1215.  Good luck!

  http://support.HP.com/us-en/document/c01416937

• Color LaserJet 2600n: uneven printing CLJ 2600n

  I recently had an opportunity Color LaserJet 2600n and inside it was a MESS! I have it cleaned and replaced all four cartridges of toner with new HP OEM units and it is printing enough now. But, if you look at the thescan of the page supplies below you can see two of the colors fade out as it goes further to the left (yellow and Magenta).

  I went through the service manual and can not see any sort of adjustment for cartridges of toner, ETB or merger. I know that old need to replace toner cartridges (I think they used a type of charging service since two of them were on the run and one was a brand of Office Depot).

  I'm really not only to replace the parts in the hope he can fix it. Someone has an idea if it is a question EBT or fusion? Perhaps another part or adjustment?

  Thanks in advance!

  Larry.

  

  Larry, this is a known issue with the scanner Assembly laser. The good news for you is that it can be fixed by cleaning, but there are some necessary disassembly. You should be able to find instructions online to document the process to disassemble the printer, removing laser Assembly, cleaning of optics in it.

  I did once and it was relatively easy, but you don't need a little space to put parts on and little patience.

• HP Color LaserJet 4600 PS: Driver HP Color LaserJet 4600 PS printer Windows Server R2 2012 problem

  Hello team HP,

  We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.

  But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.

  Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?

  If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?

  Help us to this problem as soon as POSSIBLE and its very high priority for us.

  Kind regards

  Gaudin. B

  Hello

  CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.

  Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD

  Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141

  Thank you

• Problem with Printer Color LaserJet 2600n of printing. Thin strips Magenta on the printed Pages

  I have a Color LaserJet 2600n, on which I replaced both magenta and yellow cartridges a week ago. Both cartridges are genuine HP. The printer cleaned and calibrated.

  Today, the thin magenta strips about 3 "apart began to appear on my printed pages. Print pages, but there is a 'click' stable, audible about 2 seconds apart from from the inside of the printer. Even after a cleaning several times, the bands are less bright, but they are still there. They also appear on the printed test page and on the page of troubleshooting print quality. Is there something wrong with this new magenta cartridge? This problem has never happened before in the 6 years, I've owned this printer.

  Here a link to the document that addresses the issues of print quality for your printer model. It will give you the different troubleshooting steps to try to resolve the problem. One of the steps in the document will guide on inspecting the print cartridge and see if the replacement is in order. I hope this helps.

• HP color laserjet CP4525: HP color laserjet cp4525 slow printing

  I have a color laserjet CP4525 feel verry slowly after the replacement of the ITB.

  I compare specifications letter size is 42 ppm in black and white

  My printer give a 15 ppm +/-1 page, with diagnostic test tray 2 paper.

  I did a cold reset and check the type of paper and install firmware latess 7.220.2 July 31, 2015.

  After changing the magenta cartridge and once the ITB (under warranty), still the same problem.

  All the consumable are ok

  I did a printing b & w with MSword network, a single sentence on the letter format, it will print 15 ppm +/-1 page, no more.

  the perfect print quality, what may be the cause? DC / DC control? format?.

  I need help.

  Hello

  Do you think that the printer has impeded?  Or, is there a big gap between the ejected pages?  Have you checked the paper type in the bin?  Please make sure that the paper type is set to "Plain".

  After the closure of the status bar, the media sensor will detect the first fed leaves 5 and decide on the type of media.  Maybe your media are dirty or defective?  Try cleaning the sensor of media.

  You can disable the detection of media sensor, so if the above does not resolve issue you, please let me know.

  Kind regards

  Dave

  I work for HP

• Color Laserjet pro m252dw: print off center

  My printer prints slightly biased (as too far to the right). I did the alignment test and tried to solve the problem by adjusting printing to several mm to the left, but it does not work. I am trying to print labels with graphics that contain a border of circle-because the page is printing off center seem no good labels. I print on sticker paper for labels and have used several different programs label to print from, and all have the same resulf of centred off the coast. Any suggestions? Help would be very appreciated!

  Hey @OldSoulA,

  Welcome to the Forums of HP Support!

  I understand that you have a problem of quality when printing labels from your computer Windows 8.1 to your HP Color LaserJet Pro M252dw. I would like to help you today with this problem of printing the label. Thank you for all the troubleshooting steps you tried before reaching out for support. At this point, I'm going to make sure that the labels that you are printing on conform to the specifications of your HP Laserjet Printer. Once you confirm that the labels you are using are supported, we will miss some tests in order to check if this central issue is caused by the type of paper or a problem of setting. Please follow the steps below.

  Step 1: Check paper:

  According to the specifications of your HP Laserjet Printer, the following labels are supported:

  

  • You can load up to 50 sheets of labels into the tray at 1 time. Do not exceed 50 sheets
  • Avoid mixing media into the tray with paper. Avoid labels on top of plain white paper in your loading tray
  • Avoid using labels that are separated from the backing sheet, wrinkled or damaged in any way
  • Do not use labels that have exposed the carrier sheet
  • Do power not more than once a sheet of labels into the printer
  • Avoid printing on both sides of the labels
  • Avoid printing on sheets which the labels have been removed
  • Make sure that you use the specific Laser as adhesive labels can damage internal components in your machine.

  Once you have confirmed that the paper of the label that you are using is meet the specifications of your printer can you please move to the next step.

  Step 2: Print Self Test:

  1. Load of the plain white paper in your paper tray
  2. On the front panel of your printer then drag your finger to the left and select configuration
  3. Under the menu Setup touch Service
  4. Tap the cleaning Page
  5. Print a cleaning Page now. This page should show the colored lines centered

  Check the alignment of the present report.

  • The colored lines appear centered?
  • Printing documents from your computer on plain white paper print centered?

  Please reply to this message with the result of your troubleshooting so far. Once I have the results of your troubleshooting with the answers to my questions above, I'll be more than happy to provide additional assistance for this problem. I look forward to hear from you!

• Cannot configure HP Color Laserjet M451dn to print on 3 x 5 cards

  I use a HP Laserjet M451dn connected to a MacAir running Mac OS 10.8.5.  The laptop computer and the printer are on the same network.  The printer works well when you are printing on 8.5 x 11"standard letter-size paper.  However, I was able to set up the printer to print on cards of 3 x 5 loaded into Tray 1.  I downloaded the manual which gives only the instructions in configuration of the paper formats customized for Mac OS 10.6.  What usually happens, it is 3 x 5 card through the printer, but nothing is printed on it.  Sometimes, there is an error message indicating that the lower limit is not in the print area.  Someone elese experience this problem and solved?  Are there more current intructions to create customized with Mac OS 10.8.5 paper sizes?

  I would suggest reinstalling the software, you can first try the software specific to this printer below the link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4346264&locale=en_US&TaskID=135&prodSeriesId=4346082&prodTypeId=18972

  Or the software that is generalized for LaserJet, like the PCL6 software:

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?prodTypeId=18972&prodSeriesId=503548

  Let me know what is happening in response to one of these programs.

  -Spencer

• My HP Color LaserJet CP1518ni cannot print .pdf files

  Dear,

  I have a printing problem with my HP Color LaserJet CP1518ni (function USB my iMAC), since I installed the OSX Mavericks.

  Although my printer print word files, cannot print .pdf, even through the software PREVIEW or ACROBAT files.

  It gives the break signal... any solution about that?

  It is very annoying.

  Thanks in advance for your comments or help!

  Hi Kpanag

  I understand that you cannot print the PDF files from the upgrade to Maverick.

  I'll be happy to help you with this.

  I check and repair the authorization to drive on the Mac.
  Go on the hard drive of the Mac, applications, utilities, disk utility, click Mac hardrive left side, click on verify disk permissions, when it is finished click on repair disk permissions.
  (when it's over will show disk repair completed)

  Run the Apple updates also. (the Mac uses probably drivers 10.8)

  Make sure Acrobat is up-to-date.

  If you need more simply make assistance let me know.

• HP Color Laserjet M476dw MFP: Of memory error on the HP Color Laserjet M476dw MFP printer

  Help please,

  I have a printer of HP Color laserjet M476dw MFP, its connected wireless to my computer mac laptop and it was working fine but suddenly today it appers error low memory which is strange, the file size is not more than 400 Ko, a simple solution to get red of this message pleassssssssssssssssss.

  I removed the printer and he added once again, the name of the printer seems to be good and show connected.

  Thank you.

  Shahid

  No, I did not change the toner, but I found the solution.

  This solution worked for me and my printer works now. You also try MAC OS.

  Remove the printer in printers and Scanners.
  Click on the button +, select the Protocol IP on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Good luck

• HP Color LaserJet 3600n Laser printer

  AAAI has recently updated computer from XP to Windows 7, now this printer print custom. I tried to download the new driver, but HP 3600n does not appear as a compatible printer, how can I use this printer with Windows 7?

  According to the website of HP support for Color Laserjet 3600 series, you can use the Vista driver.

  Their instructions on how to do this run (click on 'Get software' in the following link for instructions): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&taskId=135&swEnvOID=4062

  You can get the Vista driver: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=501046&taskId=135&prodTypeId=18972&prodSeriesId=501044&lang=en&cc=us

• LaserJet Pro CM1415fn: Upgraded IMac and Laserjet now only print in black

  Just upgraded my iMac, and the printer now not working is not in color. I see that the software is not available for Sierra implies that this may be the cause of the problem is it? Wish now that I had just updated! Software will be available soon?

  Thanks for letting me know @Fosse.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on printers and scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet Pro CM1415fn)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems, and that the printer is on a network, just for fun, try connecting the printer with a USB connection to see if you can print in color.

  You could have one do a manual uninstall of drivers and install the HP v5.0 for OS X printer drivers.

  Here are the steps: Uninstall HP Printer (Mac) software.

  Move the files or folders to the Recycle Bin, drag and drop.

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, HP IO and trap of HP monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * all files beginning with HP or HP.
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.

  Restart the Mac.

  Empty the trash.

  Once connected, repair disk permissions.

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Open disk utility.

  Click on the hard drive.
  Click first aid button, and then click Run.

  Try them HP v5.0 for OS X printer drivers.

  Thank you!

• HP Color LaserJet cp2025n bars prints on several pages

  Recently, our lab printer started print thick lines, "BOLD" through the pages it prints.  It is present in all printed material, including the printer Test pages.  It's quite annoying and a waste of resources.

  I'm looking for the troubleshooting steps to alleviate the issue.  Currently, the printer does not display the error codes, and all the toner cartridge levels are above 75%.

  I did not update the drivers or the computer and this is a recent development.

  I ran the cleaning diagnostic menu, there is no indication of any dirt or debris.

  The horizontal bars occur only when printing.

  Please advise troubleshooting steps.

  I can view the images now.

  Failure seen on the prints, it seems be a cartridge or HV question contact.  Since it's all the 4 colors in order, they are installed in the cartridge tray pulls.  I recommend you all the contacts field since the cartridges to the HVPS othe (power supply voltage).

  One of the possible reasons for this type of fault, is that when the drums are supported, there is a breach to the ground all four MAF at the same time that acts as a discharge (as the laser show) and here of toner is attracted to the unloading area.  It seems that it occurs once.

  I hope this helps.

  SD-86

  I work for HP