My printer is printing/not responding

Similar Questions

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Never mind. ENVY 100 D410 says Wi - Fi is on, but my iMac says printer not responding do not.

  I'm sorry but I don't know how to remove my question and I somehow accidentally received my printer to work.  Thank you.  I just moved and have a new provider so both have a connection to the provider of wireless, but not to each other.  Any suggestions?  Thank you very much.   have tried to turn the disconnect of the iMac, and the printer, so I have unplugged the century link then reconnected.  Thank you.

  Hi whiskersmom, sorry to hear that you have a problem with wifi connection on your printer. I did some research on the issue and I found a few guides that I think will help you in case of problems. Please click on the link I provided.       http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=86228&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4073738

  If this does NOT resolve the problem, please let me know and I'll be happy to offer more assistance.

  Thank you

• Why my printer not respond to commands from the computer

  The printer was working and then I tried to print a page of the internet which had some pictures as well as words.  But then I cancelled the request because it was taking too long.  Since then, it's as if the printer and computer are not connected.  I checked all the connections.

  Hello

  ·         What operating system do you use?

  ·         What is the brand and model of the printer?

  ·         You get the error message?

  ·         What exactly happens when you try to print?

  I suggest you to follow the steps in troubleshooting section and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Since the change of my name to network my printer not responding

  I recently changed my name not my canon mp620 network see continuous coming printer does not

  Should we assume that you are using the printer wireless?

• Printer not responding do not unless in administrator mode

  I am only able to print one page of 'test' if I choose Run as Admin and choose Properties and print test page... If I just choose properties without choosing run as Admin, it will not print a test page and I can't print anything else at all... Help, please!

  Go to start / Control Panel / Printers and click on properties (by means of run as Administrator option if needed).  This time, click the sharing tab and make sure that the printer is shared with everyone and give it a share name (you should be able to use the same name but it does not really difference) and full sharing of other measures to make it accessible to everyone.  I don't know if it will work, but I guess it's worth a try.

  Go to start / Network and Sharing Center / Center network and Sharingg / add a printer.  Locate the printer we talk on the network and follow the steps to add under a different name (or you can use the same name-it will just create another icon of the printer with (2) next to him).  See if the same problem occurs when you create the printer using this method instead of this one.  I hope that this solves the problem (but I have my doubts, of course).  You are an administrator too?  If so, try to use your account to do instead of sound to see if it makes a difference.

  I hope this helps.  Sorry the other options do not work - I've never seen a printer need to run as administrator to function before and I don't know how to put in place of the to do even if I wanted to do.  I'm thinking about all possible options that I imagine is that it originally and I honestly don't know.  I quickly run out of ideas.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a Canon MX700 installed on Windows XP. It makes copies but the printer is not responding to print documents

  Windows XP

  Canon MX 700

  Copies of the printer but when I try to print the document I get "printer not responding" what happened?

  Hello

  • How long have you been faced with this problem?
  • The function was working fine earlier?

  You can check these links:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• HP Envy 5530: Printer not closing

  Sometimes the printer will not stop. I press the power button / stop and it will work for cut you during a certain time and then freezes. Then I have to unplug it to stop it. This happens more often than otherwise.

  Hello @Rocky4052,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problem of response of power button that you experience when you try to stop your HP ENVY 5530 e-all-in-one printer. This problem may be due to a problem power or a problem of programming within your printer Firmware. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please plug your printer directly into a wall outlet for power. Power strips and surge protectors can cause your printer not responding correctly. Once your printer is plugged directly into an outlet please test. If the problem persists, proceed to the next step.

  Step 2: Perform a power reset:

  1. Turn on your printer
  2. With the printer on , please unplug the power cord to the back of your printer
  3. Leave the power cable disconnected for 60 seconds
  4. After that 60 seconds plug back power cord in
  5. Your printer should start up on its own

  Once the printer lights please test your machine to make sure it works. Should everything work properly please press the power button on your printer to powercycle the machine and check if your computer turns off as per normal. If "closing" issue persists, proceed to the next step.

  Step 3: update Firmware:

  The Firmware is the internal programming in your printer. Is there an internal corruption in your printers Firmware, it can cause performance within your product. Therefore, I would like to confirm that your HP Envy runs the latest version of the Firmware. Please click here to download the last Firmware update. Once the download is complete, please follow the guests to the screen to 'send' the Firmware for your printer. Once the Firmware in your HP Envy also attested to date please test your machine. Once you confirm that your machine is running according to the normal, please use the power button on your printer to powercycle the machine. If the "closing" issue persists, please proceed.

  -Source

  Please reply to this message with the result of your troubleshooting. If the problem continues then a Semi full Reset programming may need to be performed on your machine. I can't wait to hear strings attached good luck!

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP ENVY 7640: Control Panel printer is not responding.

  control panel touch printer does not respond. The power button is sensitive and the button of the nfc. Need help please

  

  Hey @mrjunior,

  Welcome to the Forum from HP Support.

  I see that the front panel of your printer does not work e-all-in-one HP ENVY 7640.  I want to help you with this.

  Have you tried a hard reset?

  1 make sure that your printer is on.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer (if it does not start automatically).

  It has more advanced reset steps available, but they are not good for you if the printer will not allow for you to navigate the touchscreen menus.  If this basic trick restores façade features let me know and I will private message you the semi full reset steps.  Otherwise, I recommend that join you our technical support team. You can click on the following link to start a business: www.hp.com/contacthp/

  Once you complete the form online to build your business, you can choose among different ways to contact direct.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• I requested a copy of the document, but the printer does not respond.

  HPofficejet5610all-in-one, I placed a doc in demand, but the printer does not respond. My icon shows document it and printer status says ready. I even changed the ports, but nothing happens. When I checked on what Control Panel first shows for printers, it showed 4 printers (1 copy), then a fax (copy1). I went to default the copy1 (that computer (windows 7) placed the doc in and still does not have the printer.) The usb cable be bad?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Printer not recognized by PC

  I recently bought A HP 1050 printer all in one.  Program loads the installation disc ok, but while scanning and copying work fine, printer will not respond to print in Word, Notepad etc.  I tried the uninstall software and download on the website of HP, but with the same result.

  Vista Home Basic operating system.

  Hi Tod,

  Thanks for posting your question on the Forums of community of Microsoft.
  After the description of the question, I understand that you cannot print from the printer.
  Let me go ahead and help you with the issue.
   
  You get the error message?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Solve printer problems
  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-printer-problems
   
  Method 2:
  Check out the link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-i-print
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.