Not printing not recognized

Similar Questions

• Portege R700 Finger Print Reader suddenly not recognized OS

  Hello

  I've been looking for a solution

  My R700 on Win7 worked perfectly using the finger print scanner. At any given time without cause the
  hardware (fingerprint reader to log on) was not recognized by the operating system more.

  -J' tried to remove the software, reinstalled driver
  -updated it and so on resulting material was not found.
  -J' even deleted all the entries in the register - no go.

  -Finger Print genuine software starts, but only to give an error that the FP-reader is not present.

  Is there a way to remove the fingerprint stored manually by removing the manually.

  The equipment works according to the support. (The machine has been send)
  However I don't want to re-setup of the entire machine (it is a work laptop) just to make it work?

  Intro step by step to achieve this or advice?

  I couldn't find a description on how to manually remove fingerprints (cause I suspect this is the problem) from the software to do this does not start.

  Any input would be appreciated.

  Best regards
  Julian

  If you do not see material unresolved fingerprints or devices in Device Manager, then the device is either disabled in the BIOS or the fingerprint sensor is defective or too loose or there is a spill of liquid causing corrosion.

• printer not recognized

  Can anyone help please?

  I have a printer HP 2050 all-in-one J510 series which I was printing with my new laptop with Windows 8 success in plugging just USB. It is not installed as says not compatible with 8 disc. (my old pc has 7) I replaced a cartridge this morning and since then have not been able to print, it is not recognizing the printer.

  Any advice would be appreciated.

  You can try to run the HP Print & Scan Doctor program. (link)

  Link to install the driver.

• Duplex not recognized under Vista 64-bit printing accessory

  I recently had to replace my old computer with an HP Pavilion a6700f running Windows Vista Home Premium 64 - bit SP1.

  I got my 7410 HP all-in-One printer connected and operating, the latest software HP installed and checked for updated drivers, firmware or Windows updates to date. Everything is up-to-date.

  However, my two-sided printing accessory is not recognized. I tried to do an update of the parameters, but the accessory does not appear in the drop-down menus.

  I learned by HP Technical Support that it is a Windows problem, but I can't quite believe that even Microsoft would come out an operating system does not recognize the material of the major manufacturer.

  Is that what everyone knows about this problem? Is this really a Windows glitch?  If so, is there a workaround solution that will allow me to do automatic duplex printing?

  pdef1949 wrote:

  Bob sent me an email with the patch, but I'm not sure I'm reading it correctly because the patch does not work. I got an error message that the printer driver has not been installed and he gave me a window to select options. I think it installs just the drivers of Bob wants to replace.

  In the e-mail to Bob, he said save the attachment as % temp%\hpo7x00t.gpd.  I don't know where to put this, and this is perhaps why the patch has not yet worked.

  Can someone tell me with certainty where to save the file?

  You just need to save the DPG file to a temporary location.  Folder is the location for temporary files of the system, it refers to a directory.  If for some reason it doesn't, you can do the following to the administrative command prompt:

  mkdir c:\temp

  [save the gpd c:\temp\hpo7x00t.gpd]

  then in the copy command:

  copy c:\temp\hpo7x00t.gpd c:

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

  I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  Try the steps in the link and check.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  Method 2:
  You can update the drivers on the manufacturer's Web site and check.
  See the link to update the driver:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
  Manufacturer link:
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Method 3:
  Try the steps from the link and check if you are able to print.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• LaserJet M1122: Printer is not recognized by NAS LenovoEZ

  Hi guys, I have buy a new brand Laserjet and I plugged it in the center of storage of LenovoEZ USB to share the printer on the network.

  Instead to recognise the Lenovo shows a 'shared device' as if the printer was a USB key with some drivers.

  The printer is not recognized as a printing device, and I have all the Office on my neck.

  I'll wait your comments.

  Mariano

  Hi Mariano,

  I recommend that you check with Lenovo,

  As you mention, the printer is fully functional with your WIndows XP and 8.

  There are different factors to conseeder on a print server.

  It is the driver for the specific printer?

  Support a printer based on the host as the M1132?

  Lenovo may be able to provide a better response to those as being familiar with possible configurations and capabilities of the print server.

  Shlomi

• USB printer (HP Laserjet 1012) is not recognized. Help, please.

  It is urgent, please!

  Hello TximasBala,

  Thank you for your message.  To clarify, when you say that your printer is not recognized, do you mean that when you plug it in via USB it is not or not you can not install the printer?  If the printer does not appear after you have connected to your computer, try another USB port on your computer.  If the driver is the problem, you can click HERE for the latest print driver.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Photosmart C7280, replacement cartridge not recognized by printer

  Hello, I have a Photosmart C7280 and it is the second time that this has happened. the Magenta cartridge clear needed replacement. I did, but the new cartridge is not recognized by the printer.

  I have:

  * removed and cleaned (écouvillonnée) all cartirdges.

  tried the old cartridge and new.

  * use the Toolbox - clean heads etc.

  * a "hard reboot" fact - disonnected the power supply to the back, then from the wall outlet.

  nothing has worked. but the hard reset worked the last time.

  suggestions please?

  Thank you

  flexible

  Hey Flexible,.

  I just ignore the message and see if it clears up in a few days.

  I'll leave the matter here if you need do not hesitate.

  Thank you.

• USB device not recognized when connecting to printer

  Hello Microsoft,

  Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

  Hello Dhruv,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the complete model of your printer RICOH SP 100 number?

  Thank you for details on the issue.

  This problem may occur because of settings and corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Please also run the printer Troubleshooter and check.
  Reference:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If this does not help, use method 2.

  Method 2:
  Controllers USB reinstall and check the issue. Please follow these steps:

  a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

  (b) in Device Manager, expand 'USB Bus controllers'.

  c. right-click any device under "Controllers of Bus USB" and click Uninstall.

  d. repeat the same steps for other devices.

  e. Once completed, restart the computer.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Support for Microsofts and printer is not recognized and said that it must be declared

  Original title: Declare the printer in vb

  Hello

  Follow-up

  HOW to: Trigger and control Visual Basic print dialog boxes

  Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared

  Thank you

  Dan

  Hi Daniel,.

  Thanks for posting your query in Microsoft Community.

  I appreciate the effort you have taken to solve this problem yourself.

  This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  Thank you.

• Printer Laser Dell 2130cn color not recognized on Windows 7 x 64

  Hi, have a Dell 2130cn duplex printer which worked fine on my old computer Dell 4550 (Win XP).  I just purchaded (2) Dell XPS 8300 (Win 7 64 bit) and when I plug the 2130cn via USB, it is not recognized.  The USB ports work fine with everything.  I spent hours with Dell support, as they just sent a service technician to replace the motherboard.  Still the same problem.  I seem to think the good driver for Win 7 64 bit is not available.  Someone at - it a thought on this?

  Hello
  The printer is compatible with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=Dell%202130cn%20Color%20Laser%20Printer%20&OS=64-bit
  Note: according to the news of the compatibility of the device has not all the drivers to install when it is connected through USB.port.

  Follow the suggestions and see if it helps.
  Method 1
  You can run the printer troubleshooter.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  You can read the article.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3
  You can uninstall and reinstall the printer and then check.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 4

  You can also contact the manufacturer of the printer for assistance on this issue.

  http://support.Dell.com/

  See also:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• HP PRINTER P2035 NOT RECOGNIZED USB.

  I BOUGHT THE NEW PRINTER HP P2035 LASER PRINTER AND NOT ABLE TO INSTALL IN WINDOWS 7. I USE THE ORIGINAL CD TO INSTALL IT BUT WHEN THE TIME TO CONNECT USB, I CONNECT BUT NOT RECOGNIZED AT ALL. I CHANGED THE USB PORTS BUT SAME PROBLEM. ALL USB PORTS ARE WORKING OTHER DEVICES WORK IN ALL THE USB PORTS ON MY DESKTOP COMPUTER.

  I DOWNLOADED THE NEW VERSION UPDATE OF P2035 HP/SUPPORT STILL THE SAME PROBLEM. I FORMATTED MY DESKTOP SAME PROBLEM. I UNINSTALLED THE ANTIVIRUS BUT NO USE. THE OPERATION OF THE SOFT WARE TILL PRINTER CONNECT THE USB CABLE AFTER THAT NO RESPONSE. NOW I AM IN TROUBLE, SINCE I AM NOT ABLE TO USE THIS NEW PRINTER. I HAVE OTHER MODELS OF PRINTERS HP (P1006, P1102) AS THESE ARE INSTALLED VERY SOON. ONLY THE MODEL P2035 IS FACING PROBLEM.

  I INSTALLED THE USB 2.0 & 3.0 DRIVERS TO CHECK IT OUT. SAME QUESTION. EVEN WITHOUT INSTALLING ANY DRIVERS, ANY PRINTER IS ON AND JUST CONNECT WITH THE USB PRINTER CABLE TO THE COMPUTER IT WILL RECOGNIZE. THIS PRINTER HAS NO ANSWER AT ALL.

  NOW WHAT SHOULD I DO?  IF YOU SOLVE MY PROBLEM, I TRY TO INSTALL MY NEW PRINTER.

  Thank you

  PRABHA

  (PII removed)

  Hello Prabha,

  Thanks for posting your query in Microsoft Community Forum.

  1. Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

  I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  Disable USB selective suspend framework. This method prevents your power off USB device.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If your problem still exists, go to method 4.

  Method 4:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  Kind regards