OfficeJet 6500 all-in-one: Digital Imaging Monitor
Is it possible to install only the HP Digital Imaging Monitor for the all-in-one printer 6500.
Or is it possible to find it on my computer.
I did the complete basic installation and this is, but then I lost it.
I had to do a full download / install drivers, who worked...
Tags: HP Printers
HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works. I looked for help & tried repeatedly, & am willing to renounce HP.
Thank you for using the HP Forums.
You can try this alternative solution to Scan:
HP extended Scan
Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
Let us know if it works.
Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?
The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:
I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax. All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit. When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly). I have problems to scan, copy and fax. The automatic document feeder works. I tried to reset the printer several times.
When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.
When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs. When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document. When you copy from the glass, the copy print in white with an error message to reload the document
The same problems occur when you try to Fax. If trying to scan, copy or fax, the printer does a lot of gears whirring noises.
Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.
I tried the doctor of printing & scanning HP. It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true). When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test. It only will allow me to ignore at this point. All the other steps show green checks.
My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?
In addition, perform both of these resets and I would like to know how they are!
Have a great day!
Our newly purchased Officejet 6500 all-in-One is the production pages with thin black lines down the page about 2/3 of the way through the page (right side of page). Is there a solution to this problem?
This was only happening with ADF. After several cleanings with no changes, I found this forum. After reading the plug on the glass, I went back and really clean the glass. This has allowed the problem. Thanks for the forum.
My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?
Reset the printer. Turn the power off and then hold the # and 6 keys during and shortly after turning it on.
Using Windows 7 64 bit and my all in one HP Officejet 6500 a can print photos from my camera on my HP 4 x 6 photo paper?
The printer handle sheets of 4 x 6 because I do not see a photo paper tray I had in a previous HP printer all in one?
Thank you for your help. Websites that recommend you explained what I needed to know.
I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all. Installation stops at about 80% complete giving the error: Network Installation fails. I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works. My printer is detected by the computer and he "wants" install, but nothing works! Wi - fi is on, and the only thing that I miss is the driver. What is the secret of installing the HP online support site? With the help of Windows OS 8.1. Thanks for any help!
Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong. It turns out that I solved the problem myself with a lot of trial and error and perseverance. The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.
The computer has been grateful to the printer, but few of the functions of the printer did not work. I kept getting notices that I need to be connected to Internet... and yet I was. Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr. The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.
The error kept showing a network connection problem, but I had already restarted the router several times. When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing! Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page. All is well again.
I want to thank Bob Headrick for his suggestion to soak the print head in warm water for 10 minutes. It was a fantastic idea. It does not solve the problem with my printer.
I'm glad that I could help him. For others looking for the solution for black not printing on the Officejet 6500 a, see the document here. (Be sure to check the events on solution 6.) If this does not resolve the problem then soak the printhead as shown in this post can help.
I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...
I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.
I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...
Thanks a lot in advance!
Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.
I can print a worddoc in portrait & landscape very well. I can print a worksheet excel in portrait mode, but when I put it in landscape mode, it will print only one or two inches on the left side & is not in landscape format at all. I unintalled and reinstalled my software updates & printing. What can I do to fix this?
I would like to help. You can answer a few questions?
- When you did the re-install, you use a disc or a download from hp.com?
- If you print a printer status or self-assessment Test report, can you give me the a.) Product # and B.) Version of the firmware of the printer?
- If you shut down your computer (not a reset) and a Hard Reset as described in the following link, is there a change? Click here
- What is the operating system for your computer?
I am trying to print Avery 5160 using Ms Excel and merge and mailing address labels in MS Word. Data print incorrectly on the labels. Tops are too low and one on the bottom are too high. Help, please
Hello! Welcome to the @Quickie forums
I would recommend to change the quality of 'Best' when you try to print your labels. Best mode will pull the slower paper and sometimes will help properly align the labels.
If this does not help, thanks for posting this concern in the Avery Help Center for better exposure on the issue with printing on Avery labels.
I want to know if the HP 6500 or 8600 printers work
With Windows 7 with an operating system of Windows XP (SP1)
64 bit. processor. I am really trying to buy a printer, but continue
be confused by the stated minimum technical requirements.
HelloI suggest you contact HP support for assistance on this issue.See also:
Error message: Solution Center cannot be used because the printer is not over. I did a clean boot and reinstalled the driver and software. The same problem. Lately the problems to get the scan function works as well. Help! I've been going in circles for three weeks.
The only thing that we rest is to restore the computer. If you can use the scan with scanners and assistant camera or Microsoft paint, then that's what you need to do to move forward. It seems that the operating system and software are in conflict with one another on this system. I would like to know what are your impressions?
Pictures come out greasy. I use HP Glossy, 200 g/m², paper photo 53 lb and best quality setting. they print paper thin onplain.
Type of paper paper size
Photo paper 102 x 152 mm (4.0 x 6.0 in.) Photo paper 127 x 179 mm (5.0 x 7.0 in) Photo paper 203 x 254 mm (8.0 x 10.0 inches) Paper photo photo L 89 x 127 mm (3.5 x 5.0 inches) 2L photo photo paper 127 x 178 mm (5.0 x 7.0 in) Borderless photo paper 102 x 152 mm (4.0 x 6.0 in.) Borderless photo paper 127 x 178 mm (5.0 x 7.0 in) Borderless photo paper 203 x 254 mm (8.0 x 10.0 inches) Borderless photo paper 216 x 279 mm (8.5 x 11.0 in) Borderless photo paper 100 x 150 mm (3.9 x 5.9 inches) L borderless photo 89 x 127 mm (3.5 x 5.0 inches) No border 2L 178 x 127 mm (7.0 x 5.0 inches) B5 without borders 182 x 257 mm (7.2 x 10.1 inches) B7 without borders 88 x 125mm (3.5 x 4.9 in) 4 x 6 borderless tab 102 x 152 mm (4.0 x 6.0 in.) Tab borderless 10 x 15 cm 100 x 150 mm (3.9 x 5.9 inches) Tab 4 x 8 borderless 100 x 200 mm (3.9 x 7.8 inches) HV without borders 101 x 180 mm (4.0 x 7.1 inches) A4 borderless double 210 x 594 mm (8.3 x 23.4 inches) (Tabs) borderless photo paper 102 x 152 mm (4.0 x 6.0 in.) (Tabs) borderless photo paper 100 x 150 mm (3.9 x 5.9 inches) (Tabs) borderless photo paper 100 x 200 mm (3.9 x 7.8 inches)
Maybe you are looking for
A few hours after the upgrade to Firefox 20, a bar has been shown at the bottom of the window telling me that some data was sent to Mozilla. the bar had a button called "Select what info" (or similar, I do not have a screenshot). By pressing the butt
I would like to have large icons on my navigation toolbar, but small icons in all other toolbars. Checking / unchecking the exchange of "small icons" box the size of all icons. For example, when I check the box, the icons in my navigation toolbar bec
Hi all I bought my DV7 1 week there and it's all very well until yesterday, I found that it plays no sound, although volume was very well and everything in the software seemed OK but with no audio output at all... I tried a lot of things, but nothing
I have print preview on my profile that nothing appears on the page to print, other profiles on my cpu it works and prints well.
can I uninstall 7 and reinstall vista