OfficeJet 6700 premium: ink

Similar Questions

• HP Officejet 6700 premium: ink black only option officejet 6700 premium

  I didn't know that my ink was low and are short of cyan and yellow. Y at - it an option to print only black ink until I am able to buy more ink color?

  Some printers allow printing mode 'reserve', which means using a cartridge. While I don't know if your printer has this mode, you can check by simply removing the cartridge that you want to keep printing.

  If the Billboard in front of said something on reserve Mode, then you have luck. Please let me know if it helps.

  For more information on the Mode of the reserve, consult this document: LINK

• OfficeJet 6700 Premium: System/0X610000F6 printer ink error

  I get error 0X610000F6 when you try to print. I went through all issues of troubleshooting on the HP support page. I need help! I don't see paper jams and I replaced the cartridges.

  Hi @Kutz8888,

  "I see that you encounter the error" 0X610000F6 "on your HP Officejet 6700 Premium e-all-in-one printer. I will definitely do my best to help you.

  This error indicates a Jam transport.

  Here is a document that I recommend that you try, HP Officejet 6600, 6700 Officejet printers - 'transport Jam' Message displays.

  Note: If you have completed all the above steps and your product still has a problem, service the product.

   

• OfficeJet 6700 Premium: cartridges of OEM 933

  I was told that this printer is perfect for printing low volumn.

  I'm on my third set of ink cartridges, including the black cartridges scence XL that I print almost exclusively in black.

  I get about twenty pages until the cartridges need to be replaced.

  It is a joke.

  HP Announces hundreds of pages, but you get to price a little and then another ink cartridge. He used ink color, even when printing in black only.

  I pay almost $1 per page, with this cartridge.

  Dave708 wrote:
  

  I highly doubt that HP will do anything with a machine that is out of warranty for more than two years.

  It becomes cheaper to buy the printer to price low and throw it away when the ink dries.

  There is nothing you can do.   Read the comments here.

  http://www.Amazon.com/HP-OfficeJet-6700-premium-wireless/product-reviews/B006M1MSKG/ref=cm_cr_dp_see_all_btm?ie=UTF8 & showViewpoints = 1 & SortBy = Recent

• HP Officejet 6700: HP Officejet 6700 Premium all in one network problems

  Printer = printer HP e-all-in-one Officejet 6700 Premium
  Model = H711n
  Number of product = CN538A
  Firmware version = MPM5CN1450AR
  Location = Ireland
  Printed pages total: 152
  Scanned pages: 58

  Other details available on request...

  I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.

  A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.

  I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.

  Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!

  After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.

  I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.

  I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.

  At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.

  So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.

  I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.

  Now...?

  OK I managed to make it work and I will try to explain the steps of my best.

  As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.

  Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.

  So I know that the printer works on at least one access point.

  Thus, in the settings of the router and firewall. The only thing enabled in the firewall have been

  IPv4 firewall protection

• OfficeJet 6700 Premium: after Windows 10 Upgrade on Officejet 6700 scanning does not work anymore - can not find scanner

  Hello

  Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.

  My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.

  I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.

  I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...".  Amazing result given that the application displays all levels of printer ink, and I can print - every time!

  I tried disabling the firewall - no difference, still do not see the scanner.

  Tried using other windows applications; Paint, etc. - no joy.

  I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!

  I hope someone else out there could have had the same problem and found a way to make it work?

  Thank you!

  Ok

  In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.

  Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.

  I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.

  Then, certainly in my case, a new facility was to solve this problem.

  See you soon,.

  Dazz

• Total number of pages printed on printer e-all-in-one-hp officejet 6700 premium do not match

  Printer model: hp officejet 6700 premium e-all-in-one

  OS: windows xp, service pack 3

  Method of connection: network

  Description of the problem: number of page do not match

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the reports of the device"" tab.

  Then click on "check printing.

  The report provides: Total number of printed Pages 8159

  If I double click on the "hp officejet 6700" icon on my desktop.

  Then click on "view the ink level.

  Then click on the "devices" tab

  Then click on "printer ews home page."

  Then click on the 'Tools' tab, I see:

  Total number of pages

  6725

  Difference = 8159-6725 = 1434

  Can someone tell me why these numbers are different? They represent different totals?

  MelanieHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have questions about your number of pages.  I would like to help.

  The built-in web server does not account for pages printed not across the network.  The number of printer pages all the elements. 1434 pages were not printed through the network, therefore, not counted in the SAP.

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• HP Officejet 6700 Premium: HP Officejet 6700

  My printer works ok.

  I tried to do a scan of the scanner to the computer and got some messages as to why the scan did not work.

  I have then started to make a 'x Printer Failure' message 'there is a problem with the printer or ink system. Turn the printer off, then turn it on. If the problem persists, contact HP.

  I changed the cartridge ink black and turned the printer and on a number of times, but now, still get the same message.

  Is there something I can do?

  Hi @PeterBx,

  Thank you for joining the Forums of HP Support!

  I see that you are having a "Printer failure" error message on your HP Officejet 6700 Premium e-all-in-one printer.  I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Due to the nature of this error message, there may be a mechanical failure.

  To help you determine the cause, I have listed a few documents that can help.

  • Error "missing or doesn't have a printhead".
  •  "' 0xc19a0005" or similar error screens
  •  Resolution of the error 'problem with ink system '.
  •  "A Message"Printer failure"which could include a ' 0x610000f6" or "0x61xxxxxx" error Code is displayed on the Control Panel printer or computer

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Officejet 6700 Premium installation problem

  I want to install everything at the time of my new printer (Officejet 6700 Premium) and after I put the ink in, I get the message «Use the cartridges configuration» supplied with your printer

  I have no installation cartridges, just the I bought - HP 932 (black) and HP 933 (colors)

  You can contact your employer to see if they have cartridges of Inbox, if they do not, please contact us in the U.S. at 1-800-474-6836 and you can order the replacement of cartridges of configuration.

• HP Officejet 6700 Premium will not print in color from Word or E-mail but copies in color

  How can I get my HP Officejet 6700 Premium to print in color from Microsoft Word or email.  It copies in color.

  Thank you.

  I would make sure that black ink is not enabled on your computer.

  1. Select Start menu
  2. go into devices and printers.
  3. right click on the printer, select printing preferences
  4. in the lower right corner, select Advanced
  5. then according to the characteristics of the printer print in grayscale as a drop-down list will appear select off if its turned on.

  Let me know how it goes.

• HP Officejet 6700 Premium - useless error message

  Only error HP Officejet 6700 Premium "there is a problem with the printer or ink system" I turned off and unplugged but same error with no code.   This message occurs as soon as the printer lights.   Where should I start looking?

  Give a call to HP support technology.

• OfficeJet 6700 Premium: Officejet 6700 Premium - Support for direct printing HP (Ad Hoc) wireless

  Please can someone confirm if you can set the to either ad hoc printing or using HP Officejet 6700 Premium Wireless Direct. I can't find anything in the user manual.

  The situation is that a friend has just moved into his own office with a connection high speed standard with a wireless router, in 'Serviced Offices'. These connections allow broadband to the office and he has to pay for a dial-up connection to the internet.

  So he paid for two ethernet connections which probably come out through internet gateway of the complex. However, he lost the ability to print at its 6700 HP that has been previously set up wireless. He tried to install the printer using infrastructure mode by connecting to the network without wire of the complex, but still can not access the printer. It could be that the wireless network is on a different network for LAN connections segment.

  The only solution I can think off is to let each PC with ethernet for Internet connection and install a wireless dongle in each PC to connect to the wireless printer. However, as noted above though I can't find the instructions for the Officejet 6500 to print Ad Hoc has nothing in the manual for the 6700.

  Is this possible?

  Fozzie

  ShlomiL wrote:
  

  Hello

  To clarify, the printer will support HP Wireless direct however with its latest firmware installed.

• OfficeJet 6700 premium print date and time on the fax history report

  Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

  Hello dcflorida,

  I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

  If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

  IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

  Here is the link to the Manual too.

• HP Officejet 6700 Premium: Don't scan and the scan dialog box will not open

  Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function.  I can't even open the scan dialog box to look at the options etc.  I tried to find 'Scanner and printer' in painting, but it does not recognize.  Any suggestions?  I already deleted the printer and re-installed.  It was working fine before on Windows 8.

  Hello
  
  Thank you for using the HP forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/model/4323605#Z7_3054ICK0K8UDA0AQC11TA930S6

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• OfficeJet 6700 Premium: Unable to connect to the server

  I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?

  Hey @bhigh904,

  Welcome to the Forum from HP Support.

  I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.

  When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • The printer's front panel, press the Setup/key icon and then tap tools
  • Select Restore to factory settings

  Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.

  Make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!