OfficeJet Pro 8500 a Premium: deleting print

Similar Questions

• OfficeJet Pro 8500 a Premium: my printer driver has changed and it's HORRIBLE

  I have been using my HP 8500 a all-in-one with a few years now with no problem.  Day before yesterday, I met a problem: when I tried to specify certain pages of a document to print, I get an error message.  However, if I chose to print the entire document, it would print.  I assumed that my driver to be updated, so I downloaded from the HP website.  WHAT A HORRIBLE MISTAKE IT WAS.  My scanning utility has changed, I can only print even when I choose to print an entire document.  I can't print at all in an Excel worksheet.  I tried uninstalling the driver and re-install.  I DON'T want to network this printer, but now whenever I have try to reinstall the driver, I can choose to connect via USB, but on the pop - up next, it does not give me the option to proceed.  It gives me the possibility to 'come back' or 'jumps' USB connection.

  What the hell is happening?

  Hi @LMKos,

  Welcome to the HP community!

  I hope you have a pleasant experience here.

  I want to help you with driver/software problems that you are having with your HP Officejet Pro 8500 has e-all-in-one printer and your computer Windows 8.

  It seems that your software is may not be installed correctly, in addition to the common issue of 8.1 to Windows Installer automatically update Windows drivers.

  First of all, with the USB cable plugged in, we want to remove all instances of your printer in Device Manager (so when you plug the USB cable back in during the new installation, it will be seen as a new device).

  1. Open your start.
  2. Start typing 'This PC', it will come under results of research. Right-click on computer and select Manage.
  3. Click Device Manager on the left side.
  4. In the main part of the window, locate in the following categories for all HP entries: Bus USB controllers, printers, imaging devices and other devices.
  5. If you see your HP printer in one of these sections, right click and select Uninstall. Keep an eye out as well for all that said device unknown and let me know if you see this at all (these are also well uninstall).
  6. After have removed all entries of HP, unplug your USB key and leave it unplugged. Do not reconnect the USB until you are asked when reinstall us.

  Next we want to remove printers from the printers and devices folder.

  1. From your desktop, or drag from the right to open the bar of charms, or press Win key + C on your keyboard.
  2. Select settings in the bar on the right.
  3. Select Control Panel
  4. Under hardware and sound, select devices and printers
  5. Right click on each icon you see for your 8500 has (even if there is only one) and select remove an instrument, or delete.

  Once this done, allows to make a cleanboot from your computer (this turns off all non-essential startup programs, so if there is another program running that interferes with the installation we can avoid it).

  How to perform a clean boot in Windows

  Once the computer restarts, try to download the HP printer install wizard to complete the installation for you. It will automatically detect your device and install the appropriate software.

  Please reply to let me know if that solves the problem.

  Good luck!

  

• HP Officejet Pro 8500 a Premium: print head

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n printer on a home network.

  I have known printing issues that point to a printhead problem; but I don't know where.  I lined up and cleaned the print heads HP Print & Scan doctor and the console on the printer.  No luck; My test pages shows the black and magenta blocks, but not blocks cyan or yellow.

  I printed the console power-on self-test diagnostic page; and, he pointed out that the status of printhead is good for the two print heads.

  If I have to replace a print head, I don't know what printhead to replace.  Of what I have posted. It sounds like black/yellow or magenta/cyan failed; or do I have another problem?

  Thank you!

  Thislink offers Fig. printhead problems.

• I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.

  I have a HP Officejet Pro 8500 a Premium e-all-in-one printer - A910n.  I'm trying to Connect HP series, but every time I create and account it tell me to log in using my password of Snapfish.  When I use my password for Snapfish "valid", it comes to request return "invalid password".  How can I fix it?

  If I'm not on the correct Board, please let me know which one I should use.

  Thank you

  Hello. You're on the good advice!  Unfortunately for correcting the offset account problem you meet you share personal information.  To protect your identity and your account security, I will private message you with what HP will need to get your accounts connected HP/Snapfish synchronized upward in order to use web services.

  Thank you!

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.

  OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.  Test page out of rose.  Ran test, test page out of rose

  The whole page out pink (which means a solid pink page) or is it roses words, boxes, and

• OfficeJet Pro 8500 has Premium - problem with printing PDF documents

  My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!

  Try the following setting and let me know any changes:

  Adobe Reader, launch the dialogue of the printer.

  Click on Advanced Options at the bottom of the dialog box.

  Check the Print as Image checkmart.

  Click OK to approve and try to print

• HP Officejet Pro 8500 not low ink printing

  I have printer HP Officejet Pro 8500 A909g all-in-one wireless.  I use laptop computers with Windows XP 32-bit, and Windows 7 Home Premium 64-bit.

  I received an error message "Unable to print" - replace the following ink cartridge to resume printing (HP 940 M).  I replaced the single cartridge and all the cartridges and still have the error message.  I thought that maybe the Magenta Ink Cartridge, I bought was the problem and I tried another new cartridge of ink Magenta.  The error message was always the same.

  I followed the "solving a problem" to "replace following the empty ink cartridge after I installed a new cartridge.

  I even replaced the printhead to see if it would fix it, but no resolution.  Before replacing the print head, I could see the ink levels and he would show levels of ink full and empty intermittently.  Now it is blocked by the error on the screen and neither will meet press OK and continue.

  This could be the cause of this error message?  You have a solution?  Is that all I can try to correct this error message?

  Dennis

  It sounds like the problem of reading ink cartridges could be caused by a bug in the firmware of the printer. There are a few things you can try to clear the glitch. First of all, make sure that you have the latest firmware installed in the printer. I'll link the instructions below. If the problem is still there after that, try to do a hard and partial reset. Do the hard reset first and if that does not work, proceed to the partial reset. If none of that works, the printer is locked on the error and must be replaced.

  Update the Firmware

• HP Officejet Pro 8500 A910 Premium will not send fax from computer with Windows 8

  My printer was working fine on Win XP and I could fax directly from the printer or the computer.  I installed 8 32-bit Windows (I am under an older system that works very well for everything that I use it for - thank you very much) and downloaded the latest driver for HP large & software for Win 8 32-bit.  Everything works perfectly, except for the computer fax.

  If I run the test of the printer fax, the fax test PASSES.  If I run the test fax from the computer, the fax test PASSES.

  If I put documents into the feeder of the printer and use the features of fax printer, it Fax beautifully.

  It's only when I fax from the computer, the screen appears with the status of the queue, then state turns to cancelled each time.

  He has always worked on Win XP.

  The FAX and FAX printer driver for the printer-FAX appeared in Control Panel automatically when I installed the HP drivers/software update.  All the properties of the FAX printer seem good.

  I tried a usb connection and a connection of network ethernet, with the same results.

  Printing and scanning all work fine.  I really like this printer and I love it even more if I could figure out how to get by fax a document from the computer.

  When I say fax from the computer, I mean opening a document saying print, select Fax - HP Officejet Pro 8500 A910, filling the page of information by fax, selecting my cover page options and press send fax.  Everything like I used to do it before I upgraded to Win 8.  When I hit send fax, it is when I get the popup that fax is in queue, then it goes to cancelled.  No error codes are displayed, no clue as to why, no nothing.  If I print the document and put it in the printer tray I can using display printer fax without problem.

  Very weird.

  Well, I spoke with some of the engineers, and they suggested next steps. First of all, here's a thread on a forum of MS on the removal of an alternate driver.

  http://TechNet.Microsoft.com/en-us/library/cc730875.aspx

  Another thing to note is that in Win8, you can easily access the command prompt by pressing the windows key and typing "command prompt".

  In addition, I will PM you walk a few others on the removal of the remains of the software from the back-end of your PC. To be sure, you will need TO follow these instructions to the letter.

  Do these two things and let me know what happens after the installation of the printer again since the direct download link I already provided above.

  Let me know and have a great day!

• OfficeJet pro 8500 a do not print

  My Officejet Pro 8500 910 has is top just print on cone winder or not at all that is the case with the test print I've tried HP Print and scan doctor he said nothing to fix. The drivers are all to date

  Y at - it something that I'm missing that could be the reason why he used print

  Thanks Dan

  You say that the problem occurs even when you print reports of self-test of the printer. Have you tried to print a report of quality printing under the Setup menu > reports to see if the problem appears in this report as well?

  In addition, see the document found here for the procedure help solve print quality problems.

• OfficeJet Pro 8500 wireless (A909g) cannot print to network on windows computers folder 8

  I have an Officejet Pro 8500 A909g on a home wireless network with three windows computers.  Recently upgraded to the Vista computer and the computer from Windows 7 to Windows 8.  Still, the third computer is Windows XP.  The updates were 'clean' (started from scratch) and the latest full version of Windows 8 Hp driver has been installed.  Everything seems to work fine, except that I can't "scan to network folder" on both machines to Windows 8!  I can scan a file from the Hp Solution Center Console and it works fine, but it's too much pain to go through all the steps.  I use "scan to network folder" a LOT, so it is a problem.  The scan to network folder continues to operate correctly on the XP machine.

  To clarify what's happening - Scan kind of works network folder: he finds the file, scans the document and saves it in the folder.  But the size of the file is zero and it is unreadable.

  I called the Hp support by phone and was happy to have very positive support, and they don't charge me even though I was out of warranty.  The technician spent almost an hour of research on the issue, running either through every test possible and to discuss with her supervisor.  In the end, she said that there must be something wrong with my computer.  I think they just ran out of options.

  I am convinced that there is a compatibility issue with Windows 8.  If so, admit it and don't running me in circles more Computer Configuration controls do.

  A related problem: I downloaded the app "Hp Scan and Capture" of Windows 8 and it works at all.  Could not find even the officejet 8500, although this model is listed as a "supported device" so that the app on the Hp website.

  Unfortunately this printer is not on the list of printers supported for this application. Unfortunately, this printer has been made too long before programming has been written so that it can be retro-compatible.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/Windows-8-app-HP-scan-and-capture/TD-p/1826665

  I hope that information is what you are looking for!

• My HP officejet pro 8500 has more - will print from my laptop, but not by the desk top

  It prints my laptop downstairs, but not from the Office superior or smart phone. There is a Wi - Fi connection.  I tried the diagnostic tests and does not issue?

  When was the last time the devices were power cycled?

  I recommend an oil change of the full power of the system:

  Unplug the router when turned on

  * Wait 30 seconds

  * Connect Router and wait for it to reboot completely

  * Reboot the computer after the powers of the router to the top

  Unplug the printer when turned on

  Disconnect the other end of the power cord from the wall outlet

  * Wait 30 seconds

  * Plug the printer back to

  Try to print now that everything has been updated.  If the unit still does not print, then get the IP address of the printer.  This can be achieved in the Setup Menu > wireless Menu.  Check the IP address which seeks the printing software.

  * Click Start menu on PC

  * Select all programs

  * Select the HP folder

  * Select the folder for the HP Officejet Pro 8500 a A910 series

  * Select update the IP address

  Also check the information contained in the document located here.  Let me know how it goes.

• OfficeJet Pro 8500 WIreless. Change print heads

  try to change the officejet pro 8500 wireless print heads.  Can't find existing print heads.  Press on * does not.  Have turned machine off and restarted the procedure - once again I can't locate heads.  My machine seems to have located differently than in the manual or video print heads.  Help, please

  miles1938,

  With the Officejet Pro 8500 Wireless ink cartridges are in the lower left front of the printer compartment.  We can access transportation, which maintains the print heads by lifting the scanner from the front, not just the scanner cover.  To move the cart and the print heads to the left so that we can access it, press and hold * key for about 6 seconds.  If the transport is not moving then we can try to move manually.  Click here for references.

• OfficeJet Pro 8500 a Premium yellow will not print

  I am not able to print Yellow.  The quality of the print head is 'good' on my two print heads.  I cleaned the Black/Yellow Printhead (which was dirty) and electrical contacts.  There is no break in the inktubes.  Original HP cartridges were full (although with all attempts to realign and clean, they are now all almost empty).  Print quality report shows no white dark lines or gaps in the Test focus3.  The reason for Test 1 shows and connected lines.  Focus 2 shows not yellow, but without streaks white through any of the colored blocks.

  So I think I've covered everything except the replacement of the print head.

  The question is to know if I can wait that it will change the situation to change the print head or if I have to get the printer serviced - and, as it is out of warranty, if it means that the cost of the service outweighs the balance of the cost of obtaining a new printer.

  What do people think?  Is that what sounds like a new printhead will correct the situation?

  Thanks in advance.

  Hello Cherniack,

  Welcome to the Forums of HP Support!

  On the Officejet 8500 has not not printing yellow and all the troubleshooting steps you have done, I would say that Yes. Replacement of the print head would be your next best step.

  Even if the printer is out of warranty, the print head may be covered. It is guaranteed is distinct from the printer and is located on the side of the printhead:

  If your print head is under warranty and you call in North America, the number is 1-800-474-6836 and for all the other regions, click here.

  If the print head is out of warranty and you want to order the replacement, visit HP SureSupply.

  Thanks for posting,

• HP Officejet Pro 8500 A910 won't print web pages in 10 Explorer with Windows 8

  New computer of windows 8 with Explorer 10.  All other computers print fine with my 8500 Pro but it will not print anything except the headers and footers of web pages.  I have chosen European Windows so this isn't the issue.  Other programs work just fine, just not Explorer web pages, for example Google directions.  It's a pain.  I tried to uninstall and reinstall the printer, but nothing seems to work.  Can you help me?

  Hi RufusE,

  I see that you are experiencing printing problems.  I would try using a different driver

  Another driver

  Let me know how it goes.