Operator 'GOLD' does not work in "IF" condition

Similar Questions

• Qosmio G10: The operating system does not work corectly

  Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.

  Don t know what to do...

  and a second question... maybe this could be the answer for the first ;-)

  in my hardware-registration of my system windows are two elements, for I can't find a driver.

  -PCI-Device
  -videocontroller fuer multimedia (German ;-))
  in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...

  does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))

  OK, please give me some advice, if you have any ideas!

  THX a lot, patrick

  Hello Patrick

  First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.

  In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.

  If your recovery DVDs is stolen, you can order a partner of service authorized in your country.

  Good bye

• Why real player gold does not work properly, real downloader

  When I download movies from sum for my own use, I have xp family, I just use it for my own, i hae a lot of problems with the download of real, they are cancelled or does not work and I spend too much time (x-rated)

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• Scout does not work in all conditions

  Scout currently does not work in every browser or application of AIR on my PC.

  I had tried everything I could and it still does not.

  And I noticed every time I start up Scout it will create. telemetry.cfg under "$User$ \AppData\Local\Google\Chrome\User Data\Default\Pepper Data\Shockwave Flash\UserHome ', even after I have uninstall Google Chrome, it's so weired.

  I assume you are using Windows, in which case you could run into a problem with the path that Flash Player is used for the configuration file (. telemetry.cfg). Flash Player has recently modified the path, it uses under %HOMEDRIVE%%HOMEPATH% , slot %USERPROFILE% , and Scout 1.0 does not know this (it will be fixed in 1.1 Scout, soon).

  Please check if these environment variables point to the same place (you can just copy them into the address bar of the Explorer and see where that takes you to). If they point to the same place, then you must manually create a hard link to it:

  (1) open the command line (cmd.exe) - you will need administrative permissions, open with Ctrl-Shift-Enter

  (2) run the following command:

  mklink /H %USERPROFILE%\.telemetry.cfg %HOMEDRIVE%%HOMEPATH%\.telemetry.cfg

  If this isn't your problem, make sure that you have followed all the steps in the FAQ of the startup guide: http://www.adobe.com/devnet/scout/articles/adobe-scout-getting-started.html

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• Help! My operating system does not work with disc

  When I installed the DIGITAL SOLUTION DISK for my new EOS 7 d mark ii a window pops up stating:

  This software is not compatible with your operating system

  I use an old dell works well with XP, is there a way to get around this, I already have photo professional, eos utility etc. of my rebel...

  ANY help would be greatly appreciated

  Having been forced to upgrade too because I need to process RAW images from the 2 7 using Photoshop, I can tell my updates went well. I bought Win 8.1 & done a clean install on a new hard drive & waited to win 10 out & from my old programs would continue to operate. 10 once was readily available that I made an another clean install on another hard drive as an installation & nine 64-bit (added 16 gigabytes of memory also) & things was great when working in Photoshop, BUT for all those who 7 2 treatment check CR2 what device profile is best. By default, it chooses an Adobe profile that works very well with my other camera files but Standard camera looks better with 7 2 files.

  (My computer has provisions for 5 internal hard drives & I 5) I can easily re boot for XP or Win 8.1 if I need to use one of my old programs, but so far, I've been running Win 10 on my office & XP on my laptop.

• operating system does not work

  My laptop runs bt I dnt know why it is said that installing the operating system.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  According to the message that you posted, I suspect that this could be due to the recent changes are applicable

  I'd like to request you to perform the procedure to solve the problem below:

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Safe Mode" in the early startup Option list

  Note: Wait until you get to the Windows desktop

  Step 05. Please remove unwanted startup items and uninstall unwanted applications

  Step 06. Please reboot / restart your PC normally

  Note: Incase if these steps don't work you can continue to troubleshoot the issue once again

  Step 01. Turn off the computer

  Step 02. Turn on the PC and keep pressing the F8 key

  Step 03. Select "Last known good configuration" in the list of the early start Option

  Note: Wait until you get to the Windows desktop

  Step 04. Please remove unwanted startup items and uninstall unwanted applications

  Step 05. Please reboot / restart your PC normally

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Problems of migration to a new system - guest operating system does not work

  I've been running VMware Player on a Win 7 64 bit laptop.  I have 3 computers of customers, which is 32-bit Win XP.  I've just set up a new machine, also running Win 7 64 bit, but a processor more recent (i7) and more memory (32 GB).  I use the same version of the player on both machines (4.0.1 build-528992).  I copied all the files from the laptop to the new office.  Ubuntu and Mac OS X Lion customers will work perfectly.  When I try to run the client Win XP, I get the following message:

  File not found: Windows XP Mode base.vhd

  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location.

  I don't have a VHD file, I have a VMDK file (again, which works fine on the laptop).  I tried turn off the virtual machine on the laptop, then copying the files to the desktop, and I also tried to suspend, both with the same results.  When I try to change the settings of the virtual machine on the new desktop, clicking on the adjustment of the hard drive (IDE) causes the following message:

  The parent of this virtual disk could not be opened.

  The VMDK file is 19.2 GB.  I've searched and searched trying to find why this could happen and found nothing.  The XP machine has a good bit of responsible software that I use on a daily basis.  Last resort, I could create a virtual XP machine on the new desktop and reload all the software, but strongly prefer not to do it - it would be a tedious task.

  Does anyone have any ideas as to what could happen and how to fix it?  I copied the files several times to ensure that it is not something simple like a damaged copy.  I'm puzzled.  The XP machine was NOT initially a WIndows XP Mode machine, even if the message indicates that VMware Player seems to think it is (and, again, it works fine on the laptop).  The name of the virtual machine is "WIndows XP Mode" - maybe that's why he complains.  Is it possible to rename all of the files and references to files to resolve this problem?

  Any help would be greatly appreciated!

  Welcome to the community,

  We can be able to know if the virtual machine is one any "Windows XP Mode" VM or not to take a look at VMware.log virtual machine. Please attach the last file vmware.log file XP VM (that of the laptop), as well as the PC to your next post.

  André

• NIC Vista guest operating system does not work

  I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.

  I just installed Windows Vista business as a guest operating system, but I can't get the network to work.

  How to make this work?

  The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.

  Concerning

  MazH

  It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.

  Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.

  AWo

  VCP / VMware vEXPERT 2009

• Star Wars Empire at war gold does not work on Windows Vista

  I bought star wars empire at war gold and when pack I insert on the tray and close it, it didn't read on my hp pavilion a6120n pc. After some time, nothing happened. Why?

  The other question...?

  As I said - if you can not read at all on a single computer and can be downloaded to another computer - the obvious suspect is usually the problem.

  Third question about all this...

  Can you read other CD/DVD in the drive that cannot read this particular CD/DVD?
  (It cannot be 100% dead - just not that good of a player OR go dead.)

• HP Pavilion dv7-4065dx operating system does not work, drive hard main self-test results 303.

  How repairing when HP Pavilion dv7-4065dx will not run the operating system, disk hard main self-test result 303.

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with the problem you describe.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Comparison operator "ALL" does not work in a single query

  Hi friends,
  
  I created two tables t_test1 and t_test2, both are of the same structure and with the same data.
  
  I don't get any line at the bottom of the query, I know why, because I put 'ALL' and if the tables have the same data, then it it shud be not 0 rows.
  
  Select t1.first, t1.last from t1 t_test1
  where t1.first = all (select t2.first in t_test2 t2);
  
  Thank you...

  user11977545 wrote:
  you are able to get data from a query even if z is subset of PGE, if you are going to use the same query, but in the opposite direction, then u don't receive all the lines, in my case, since both are queries have the same data, so IT's not giving any output.

  When you use everything you say this, each T1 line must match the ENTIRE line in T2.

  That's why you get 0 rows.

• Satellite P100-324 - GPU overheating due to fan does not work in the operating system

  Hello world.

  While trying to solve the problem of RAM of 4 GB ([this thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=28374&tstart=0]), I meet another weird thing - gpu overheating due to fan does not work in the operating system.

  Now, I restored the XP MCE using the Toshiba Recovery and I was VERY surprised to see that the problem still exists! As soon as loading the system GPU fan stops, and there is only tranquility. The application load is heavy on GPU and reaching 104 results by reducing its GPU and MEMORY clock values and NOT in the activation of the fan.

  The same thing happens in 64-bit gentoo. ACPI can be turned on or off, it is not serious, the GPU fan always dies as soon as the system load. In non-OS environments (bios, program of recovery, etc.) the fan works fine, GPU cooling from time to time.

  This problem occurs in versions of BIOS: 2.40, 4.00, 4.20.

  Any help would be greatly appreciated, since this laptop is my main working tool and I can't let go 14 days (service).

  I saw in your other thread that you have updated the BIOS and you have installed several different OS.

  Fact is that the BIOS v 4.2 package contains BIOS 32-bit and 64-bit OS.
  Your laptop has been preloaded with Win XP MCE 32 bit. Please use the 32-bit BIOS if the original XP MCE running on the laptop.

  Best regards

• Problem AnyDVD update 'AnyDVD does not work on your operating system'

  For many years, I used a system called 'AnyDVD '. Today I received a memo to update to the latest version I've done dozens of times in the past.
  This time, however, I have download the new item and click on "run" the file, I get a pop-up window indicating. "AnyDVD does not work on your operating system. .....
  I'm no computer expert so I don't have any idea what to do... I tried a system restore to a few days, but that did not help.
  In the meantime, the previous version of AnyDVD still works as always. How can the old system works but now an update does not work on my operating system. That makes no sense.

  Thanks for the comments... But does not apply to this problem. AnyDVD has free updates. Problem was somewhere in the system and can be corrected within 24 hours and was able to update with no further incident. Still a mystery, but is no longer a problem.

• during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

  Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

  You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

  Hope that you made the backup recommended all of your data before attempting to install Vista SP2.