PC stops on own, no restart

Similar Questions

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• iOS 10 video playback stops working until you restart

  I have an iPad Mini retina, and since the upgrade to iOS 10.0.01, a short period of use causes videos to stop working.

  Videos in Safari, Chrome, YouTube etc. appear in the cache (saturated with progress on the top bar), but no response to play. The first image of a video appears, but only in the form of static image. I am able to change the static image displayed by rubbing them at any point in the video, but playback will not occur.

  The only thing that allows video playback is again restart the device (apps force closing, locking and unlocking etc. doesn't help).

  Hello, Sunkai!

  Thank you for using communities Support from Apple. I understand from your post that you're having trouble playing videos on your iPad mini; the video will start but will be stuck as a single image, as if the buffering and never take back (at least until you restart). I mainly use my iPad for watching videos, so I know it's important that they play in fact; I'm happy to help you!

  I have some troubleshooting I can offer to you. Before you begin, create a backup of your iPad using iCloud or iTunes, following the instructions here: How to back up your iPad, iPhone or iPod touch

  Once you have your backup, try the following steps, in order. A video test after each step and will stop when the problem is resolved.

  1. Make sure your iOS software is up-to-date. In the last week, iOS 10.0.2 came out. Use the following article to get help update: update the iOS on iPhone, iPad, or iPod touch software
  2. If this happens on a Wi - Fi connection, try restarting the network you are using from the router or the modem (if possible). If it is a private (for example, your home network) WiFi network, try to remove all the devices on the network, then by simply adding your iPad in return.
  3. Try a different network.
  4. Reset the network settings on your iPad under settings > general > reset > reset network settings. This will affect all personal data (like your photos, contacts, calendar of events, etc.) but it will remove saved passwords, and Wi - Fi networks one previously used settings APN or VPN and all paired Bluetooth device.
  5. Restore your iPad settings, following the steps described here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure the iPad as a new device (i.e. without using the backup that you created earlier, at least temporarily). You can sign in iCloud, iTunes and App Store, iMessage and FaceTime with your Apple ID test then a video.

     If the problem is resolved, you can restore your backup by the information here: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Gow I stop Firefox from opening a Web site that crashed or stop it when I restart?

  Sometimes a Web site is not responding, I close firefox manually, usually a c; tab dare on my windows pc. When I restart firefox, it goes back to this site, rather than 'well, it's embarrassing...'. y at - it a way to stop this. When I close my firefos, I have it set to clear the history. You helpr oe can shed some light?
  Thank you.

  Firefox will automatically try to restore the tabs and windows from last session if an accident occurred or Firefox does not close properly the last time.
  If the session blocks once, then you will get the page "well, it's embarrassing" (topic: sessionrestore) the next time you start Firefox.
  You can set the pref browser.sessionstore.max_resumed_crashes to 0 on the subject: config page in order to get the about: sessionrestore page immediately with the first start after a collision has occurred or the Task Manager was used for the closing of Firefox.

  • http://KB.mozillazine.org/browser.sessionstore.max_resumed_crashes

  This way, you see if the previous session is not close properly or it crashed and deselects the tabs that you do not want to reopen, but will reopen the other tabs.
  If you cannot start Firefox, then you can add this line to the file prefs.js to prevent Firefox to restore the last session automatically.
  user_pref ("browser.sessionstore.max_resumed_crashes", 0);

• Satellite M60-132 - USB stops working until you restart

  My problem looks like this:

  All USB ports die after a few minutes (time may vary, but is shortened recently) after the start. They give no error - the USB mouse stops responding, the USB drive gives stops giving "delayed write failure" or sth like that. They are all visible and OK in device (Windows XP) Manager, no problem not being reported here. They have just stop working. I tried to reinstall Windows. It is not dependent on the OS actually. For example, I can boot from a live CD of SuSe Linux and ports will also die after a few minutes - they do on any OS tested.

  Now, I have discovered (GOOGLE usb ports stops working until the reboot) that several Satellite M60 users report this problem with their old cell phones. Exactly the same thing - ports die after a certain time of start and remain that way until you restart. In one case the user writes that he bought a cardbus PCMCIA USB controller and the problem continues - the ports of the controller when dying as well as embedded.

  My idea is to try even when the PCMCIA - maybe it will work in my case (another chip etc - you have never know). And anothr one must try to connect a USB hub to the Firewire port available. There are USB to Firewire Converter cards - could work like that?

  Anyone know any solution to my problem or have an opinion on my ideas? I am looking to buy a new laptop, which I can't really afford right now...

  Hello

  To be honest I've ever read on these problems on the Satellite M60, but it can happen from time to time, because it of also a fairly old laptop.

  My friend also uses a PCMCIA card that has USB ports on his old notebook. He is quite satisfied with this solution because it don t need to each time the USB ports. Just sometimes if he's copying files on USB.
  These cards are cheap, you can get it for a few s Euro and you can buy this card where you want, for example Amazon.co.uk.

  I never heard firewire to USB ports, which is new to me and I n t have experience with this.

  Welcome them

• Satellite L40-139 - cannot stop because it still restarts

  Hi all

  I have a l40-139 with 2 GB of RAM & Vista Home Premium. Since I bought this laptop there was 1 single persistent bug. When I select (any method) shutdown the laptop reboots always.

  I have disabled all options "wake on" power.

  I've updated the drivers and BIOS. And I can't get Windows vista just to stop when required. He has always turned off then restarts 3 seconds later. The only way to ensure that it turns off and stays off it to press the power button for 10-15 seconds. Or delete lead battery & power.

  I googled and not found a solution.

  Does anyone else have this problem? and a fix for it.

  Thank you

  Hello

  A friend of mine had the same problem. He solved the problem as it has disabled more upward on the LAN feature in the BIOS and Windows.
  Check the BIOS for this option and Windows you can find it in Device Manager > properties of network card.

  In addition, I will disable the function Sleep & USB support in the BIOS.

  I hope I could help you! :)

  Welcome them

• ProBook 430: Synaptics imprint wbf stop working if I restart the pc, while it works if I stop and turn

  With the pc starts and fully functional, the installed fingerprint reader work corretly. If I stop the laptop and I reboot, it still works and I can unlock / connection using the fingerprint. If I reboot manually or if the system restarts for example because updates are installed, the fingerprint stop working. So I need to reinstall the driver using the feature "repair driver."

  @mregazzi

  Welcome to the HP Community Forum - we are a community of fans of HP !

  System, one of the three main models:

  "ProBook 430" (12).

  Consider / try a newer driver.

  Download information and Release Notes page:

  Synaptics (validity) of fingerprint driver - 4.5.315.0 Rev.A

  Version: Rev.A 4.5.315.0 (September 17, 2015)

  Improvements

• USB-6009 DAQmx meter task stops and does not restart when you restart the VI

  I have the task of counter DAQmx which "hangs up" while troubleshooting a VI and does not restart when I restart Traoré.  See attached fragment VI.  The counter works reliably in normal operation, but some combinations of interruption and running "highlighted" causes to stop work.  It's in LabVIEW 2009.

  It will restart if I close the VI and reopen it.  However, this causes losing me my window probe laboriously built with ten

  the probes.

  Is it possible to re - initialize a DAQmx task without closing the VI?

  This significantly slows the troubleshooting.

  As an alternative, if anyone can suggest a way to preserve a probe Watch window after closing of associated VI, it would be a work around.

  Please do not take into account.

  Counteract the work of task - it's the rest of the program which is hung up.

• STOP 0X7E and rolling restart after Windows update

  Hello

  My apologies if this has been covered before.  I did a search and have not seen this covered.

  I'm working on HP zv6000 laptop computer a parent with Windows XP Home Edition.  I do not have the recovery disks that may have come with it, and there is no recovery/repair hard disk partition.  Sometime in early January, after a reboot due to the installation of the updates of Windows, he went in a rolling start scenario.  After several attempts, I got to the screen automatic reboot temporarily disabled and advanced boot options.  The error it gives is:

  STOP 0x0000007E (0xC0000005, 0x89891E7A, 0xF78DA7B0, 0xF78DA4C) parameters with.  No module name is given after the error message.

  The laptop does not start in safe mode.  It restarts after loading mup.sys.  I don't know which module occurs after that in the boot sequence, which told me a lot.

  I suspect a driver issue, but do not know how to proceed from here.  I can get into the recovery console via a XP Pro CD and can start with a BartPE disk.

  Can I turn off the drivers of one of these means?  If so, how do you identify which those who have been installed around January 9?   Once identified, is debilitating as simple as move or rename the driver file?

  Thanks for your suggestions!

  All,

  The problem has been resolved by doing a repair of the Home CD from the manufacturer of the Windows XP installation.  It restored the laptop to XP SP2 status.  I installed the SP3 and later updates, but refused to install 3 updates of pilot.  Everything seems to work OK.

• Error 1717 event log stopped and does not restart

  Dear friends,

  I thought that I had a problem with Google Music. He stops and give me an error code so I tried to uninstall to reinstall. He hung up to uninstall (I have a screen shot) and gave me the following code.
  "Error code 1717 in DllMain.
  This happens usually when the recorder of events from Windows service is not running. Setup will continue without log status messages.
  Now when Google Music tries to start at startup and at regular intervals, I get the same error Code 1717. I can't uninstall and it will not work.
  Just a day or two before this happened I had problems with the Weather Channel desktop Google gadgets and tried to uninstall that and he doesn't uninstall properly and still won't. I guess it could be where it all started, but don't tell me anything. Maybe he could tell you something of value if you can help me.
  I found a few posts here and there online that suggested:
  1. from the 'Windows event log"manually in Safe Mode, but that has not worked.
  2 remove or change the name of the RtBackup folder in the C:\Windows\System32\LogFiles\WMI folder. I tried to do this as "Administrator", but it would not allow me to change the name of the folder or to remove the folder. I have studied also change permissions for the folder, but I have all the permissions as the administrator. It simply cannot afford to make this change.
  The system is a Dell Studio 540 (64-bit) running Windows Vista Home Premium SP2. Updates are current as of yesterday. I just checked and I have 2 new Vista install now.
  Any suggestions? Any help would be greatly appreciated.
  Tony

  Hi Tony,.

  You can check out the following link and check if it helps to solve the problem:

  Failed to start service on Windows 7 windows event log. Error 4201.

  Important note: this response contains a reference to the third party World Wide Web site.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• New elite 400z stops and tries to restart

  After 1 week, my new elite 400z stops after some time (which varies from 15 minutes to a few hours) and try to restart.  It stops at the blue HP screen.  After power off, it won't start immediately and not for a period of time.  It sounds like a heat related issue but any advice would be appreciated.  Decision to be taken soon to try to get my money back.  PJM

  Problem solved?  After a lot of perseverance, a real stroke of luck and a bit of knowledge in computer science, the problem was apparently a bad memory module.  Fortunately, I solved the problem myself and did not notice to reformat the hard drive and reinstall Windows. PJM

• Win7 Vista upgrade nearly complete but stops due to auto-restart failure

  I'm trying to upgrade Vista Home Premium to Win7 Home Premium on my Sony laptop. I don't want to do a clean install of Win7 since I have a lot of older programs that I do not have the diskettes to install for more long.

  The upgrade progresses through most stages (3 hours), but then he tries to do the first Setup reboot and fails with this msg:

  "Windows has no prepare the computer to start the next phase of the installation."  To install windows, restart the installation. »

  I tried again from the beginning and got the same result.     I made sure my computer (Vista) could well make a Start Menu-> Restart, and, in fact, he did. I.e. not hang up as he tried to stop.

  So, what does this error message?  Is there something I can do to correct what is the cause?

  Oh, BTW, I had the Trojan.ransom virus recently on the laptop for awhile but Malwarebytes quarantined it.   All my user files (jpg, wav, mp3, pdf, doc, txt, etc.) have been encrypted by the criminals, but it doesn't seem to affect the programs. (Fortunately, I had a backup of my files from the user.)   My main boot disk could be damaged?

  Thank you...

  The first thing I would do is make a backup of your installation of Windows Vista on an external hard drive.

  Best software free backup - EaseUS Todo Backup free

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• Windows 7 problems with gel applications, programs stop working until you restart

  Windows 7 is a stupid IDEA! . Since then, I have installed windows 7 64-bit on my 64-bit machine. I had problems. Programs to decide that they will not open until I restart. IE and Firefox both freeze when all Web sites are trying to load a video. Also other programs will just stop working and turn off while they don't reopen until I restart again. I installed 7 as an upgrade not a clean install, I'm not sure how to go about backup up files for that. I'm also extremely ready to roll back to Vista, I have not had ANY problems with him. I am also about to throw my laptop through a wall with windows 7 and microsoft. Thank you for another piece of trash! (and headaches). With all that money, you would think they can actually DO SOMETHING RIGHT!. I have now lost $120 on garbage, might as well use windows 7 CD as a Brawler of ice this winter.

  PS everyone has ideas?

  TechBuff48

  Rants are part of the dealing with technology. As long as they are against the technical and personal equipment no technical, I think we've all been there. Ironically, two days after my message praising Win7, I had a spontaneous reboot that seems to be associated with a known issue with the sensitivity of kernel-power. I was able to reproduce twice, so I think I have a work around until the bug is addressed.

  OK, back on topic. If you have a version to the retail/TMC, you should be able to perform a clean installation with the option to format the drive; then, the fun of reloading everything from scratch and to restore from a backup. I'm not promoting a particular site, but this one

  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp
  or
  http://community.winsupersite.com/blogs/Paul/archive/2009/10/23/clean-install-Windows-7-with-upgrade-media-the-answer.aspx
  or
  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html
  or
  http://answers.Yahoo.com/question/index?QID=20091022164612AAAJ4kM

  There are also other tools available to start from a CD or a DVD and then format the drive in NTFS, reinstall it from scratch. But you must have a DVD very convenient for loading eligible upgrade then Win 7.

  Good luck!

  MisterWeather

• the ACS 5.1 stopped authentication logs after restart!

  Hi all

  I recorded the configuration running on first startup and restarted the ACS 5.1. Since then he stopped authentication logs, if I can connect to network devices using Ganymede connection, but I get no logs of authentication Ganymede? Your prompt response will be appreciated

  Rgds

  HK

  Hello

  Can you please access the ACS CLI through SSH or Console and run "display the acs application state? Are all ACS services running or some hang on the State "Initializing" or "not tested"?

  If so, you might want to try a restart of services ACS with 'stop acs', then 'start acs '.

  If the reports are not displayed on the follow-up and reports it is generally considered a problem with ACS View services.

  I hope this helps.

  Kind regards.