Print duplex does not not with Office Jet Pro L7780 (L7700-network) with Snow Leopard

Similar Questions

• New Office Jet Pro L7780 problem

  I just bought an Office Jet Pro L7780 at an auction and there was no power cord for it. I thought that I can buy one but indicated in the manual does not fit. The place that shows manual for plugging is not the same thing on my device. I don't know what kind of food in order to buy and where exactly he's going.

  Hi Luther133,

  The parts you need are listed below and a link to the site of HP replacement parts.

  67339 C8187 - module power - input voltage 100-240 VAC, 50 / 60 Hz - output voltage 32VDC, 2500mA - requires a power cord detachable sector (worldwide)

  8121-1023 - AC power cord (Black) - 3 conductors, length of 0.5 m (19.6 in)

  http://h20141.www2.HP.com/hpparts/partsdirectory/catalog_solutions_NA.htm

• How to print envelopes and labels on an Office Jet Pro 8600 more all-in-one

  Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?

  If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?

  cor21911,

  You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.

  Let me know if you need additional assistance.

• The editor does not open after 11 items is transferred from Mac Snow Leopard OS 10.10.2 Yosemite

  I've been running Photoshop elements on a Mac with OS 10.6.8 11 (Snow Leopard). I just got a new Mac with the latest OS X (OS 10.10.2,"limited Yosemite). I transferred all my files on the new computer using the Migration Wizard.

  PES 11 seems to install properly and the organizer opens OK, except that I get a message saying "some online services are not available" and her asking if I want to continue without them. However when I try to open the editor it opens, instead I get two error messages, first "among application components are missing from the Application directory, please reinstall the application", then "a required application library failed to open and the product cannot continue. Please reinstall the application '.

  My questions are - should I just do a reinstall from the original disk? If so, should I do a complete uninstall of 11 items first? If I do a reinstall, will I lose all the changes, the version sets or something else?

  I had said that I should be able to simply transfer via the PES 11, with the original product key only. Will there be incompatibilities between 11 PES and the latest version of Yosemite?

  Thanks for any guidance,

  Nick

  You can never, never, never transfer any installed version of the EP on any platform. You should always install from scratch on a new machine. Trying to to, you have made more work for yourself. You must download and run this:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  that won't seem to do anything, but is a necessary step to break the links within the program. Then you can go to and manually remove everything related to the PSE that you can find, not only Applications, but also your username > library > Preferences and the library at the top level of your hard drive > application support > adobe. You go to these places manually; Spotlight will not help you with this type of research.

  Then, you can reinstall your original media or from the download here:

  Download Photoshop Elements products | 10, 11, 12, 13

• Office jet pro 8610: wireless network connection

  We have an office pro 8610 jet that is connected to the router wireless via a connection cable, wireless to the printer should be turned off. 2 laptops in the House continually revisit the wireless printer output and plug. Why the laptop does not see the connect if the output of the printer wireless is disabled? Even if I check the box for this connection is not to be automatically connected to it will always connect when you turn on the laptop?

  Hello @richardbo,

  Welcome to the Forums of HP and thanks for posting!

  I understand that you have a problem with your devices wirelessly to the network that connects the printer e-all-in-one HP Officejet Pro 8610 automatically. I'd love to help you with this.

  You are right on the assumption that the ethernet disables the ability of the printer to connect to a wireless network. However, the printer has a feature called live wireless. Basically, the printer will be broadcast a signal and act as a router so that you can connect devices directly to it. I suspect that's what devices are connected, then here are the steps which stops:

  1. On the homescreen of the printer, tap the Wireless live downstairs. ((Deuxième à gauche)
  2. Select settings.
  3. Select Direct wirelessand OFF.

  Please reply to let me know if that solves the problem!

  Have a great day.

  

• Office jet Pro L7780: Office Jet Pro L7780 stopped scanning after upgrading to El Capitan

  After the upgrade to El Capitan I can't us the scan function.  I deleted and reinstalled the driver.  Scanner does not appear.  I tried to install HP "Easy Scan" and it says that the scanner is not available. What to do?

  Thank you

  Ron

  Hi @danorske,

  Welcome to the Forums of HP Support! I see that you have problems of analysis, after upgrade to El Capitan. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please try the steps listed in this document, Printers HP - Scanner USB connection is lost (Mac).

  If the network printer, please use this document, Printers HP - Scanner card WLAN is lost (Mac).

  Probably the step to reset the printing on Mac system, will help you in this situation.

  How is the printer connected?

  Please let me know the results and if there is anything else I can help you. Thank you.

• How can I select if my document is printed in black or color. Office Jet Pro 8600 Prime Minister

  I want to be able to print some documents color to black ink only. How can this be accomplished?

  Who did.  Thank you.  Excellent printer.

• HP OFFICE JET PRO 6960: HP OFFICE JET PRO 6960 does not print pages with j.pegs on them, only those with a pure impression

  HP Office Jet Pro 6960  New installed printer yesterday using CD

  Hi L-U-L-U,.

  Thank you for your answer!

  I would certainly recommend re - create these two files. If everything else is fine printing, it is possible that these files has become corrupted somehow.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

  I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

  I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

  Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

  Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

  Thanks in advance!

  Hello @rnegron57,

  Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

  You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

  I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

  I'll watch for your reply, I would like to know the results.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• How to choose a print with black ink only on the Office Jet Pro 8600?

  How to choose a print with black ink only on the Office Jet Pro 8600?

  Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.

  

• Print Help does not help me open downloads on my android

  Cannot retrieve or open downloads. Printed text does not help because I can't find the button

  You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.

  In the menu, you should find under Tools downloads.

  In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).

  A little luck?

• Epson printer driver does not appear in the printer & Scanner window

  I downloaded the latest driver for my Epson Artisan 50 printer OS 10.11.5. I ran the installer, and it seems that the installation was successful. But when I am preferences system-> printers and Scanners and click the + to add the new printer, it does not appear in the list 'Add '. How ca I add the driver to my preferences printers and Scanners?

  Mark Romine wrote:

  How ca I add the driver to my preferences printers and Scanners?

  You do not add a printer driver for printers and Scanners.  You add the printer itself.

  The Epson Artisan 50 is not a printer capable of AirPrint, as shown here:

  On AirPrint - Apple Support

  (I have an Epson taking is an AirPrint printer, and it works very well with OS X 10.11.5.)

  The Artisan 50 printer seems (but not scanner) software in the Apple driver:

  Printer and scanner software available for download for your Mac - Apple Support

  Therefore, follow the instructions here:

  OS X El Capitan: Add or remove a printer

• HP Smart print icon does not appear

  After installing HP Smart print, icon does not appear in the command bar in the Internet Explorer browser. It appears only when I transfer a message outlook for the Internet Explorer browser. Plese help.

  Operating system Windows 7-64

  THAT IS TO SAY 9

  I found out that HP Smart printing is not compatible with IE (64 bit) so my problem was solved by using IE (256).

  Thank you very much.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!