Printer HP laserjet MFP M1136: photocopy blank copy

Similar Questions

• Printer HP LaserJet Pro M1136 multifunctional scan quality

  Name of the product - MFP HP LaserJet Pro M1136
  Product number - CNGTD4CJLC
  OS - Windows 7
  ERR Msg - no
  All the changes made - no. This is a brand new and 7 days of the cardboard box.

  Recently, I bought a LaserJet M1136 MFP printer. Printing works fine. However, the quality of scan is very poor. In particular the written document scanning gives VERY VERY bad results in quality. This product comes with ReadIrIs product for scanning.

  However the native scan and ReadiRiS does any good in terms of improving the quality of scanning.

  I tried scanning documents with the recommended 300 dpi. Also, I used only B & W and grayscale for the tests.

  Appreciate if you have any solution to improve that.

  Fantastic, I'm very happy to hear that everything is resolved.

  Have a wonderful day!

• Printer HP laserjet MFP Pro M127fn & 125: we have a big problem with this printer

  We have 20 printers or more M125fn and M127fn, we have problem with printing on the fonts Geo_Times, Geo_Times "BOLD", Geo_Times Italic, Bold Italic Geo_Times, we have programs that work on this policy and no one can print the text on this subject, please help us with this problem.

  Hello

  What program you are trying to print from?

  Printers use language to print Cffp, it will help to know the program to make sure that it does not require a more advanced PCL 6 printer

• HP laserJet MFP Pro M225DW printer: printer HP laserjet MFP M225DW not install on windows Xp sp2

  During the installation phase, I get a fatal error:

  A fatal error occurred prevents use of the product.

  Click 'Cancel' to cancel the installation.

  No reason. No work around. Reset did not work. Download the basic driver came with the same error.

  But installed on Win 7, 8 succeed.

  Help, please.

  

  Hello

  Printing software requires Service Pack 3, you can find system requirements below:

  System requirements: Windows XP (32-bit) Service Pack 3http://support.hp.com/us-en/document/c04328137
  

  You can follow these steps to upgrade your operating system, it is necessary to install the HP software for your printer:

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Kind regards

  Shlomi

• HP LaserJet M125nw MFP pro: printer HP LaserJet MFP M125nw pro - analysis not through phones android cell phones

  
  
  The current version of the firmware is 20150228

• Color LaserJet MFP M277 dw Pro: Setup disk gives an error and stops before the connection to the printer

  Hello

  I try to install the printer 'Color LaserJet MFP M277 dw Pro'.
  By inserting the disc into the phase "installation preparation" is 96% and then stops and gives me the error.
  I use Windows XP SP3. It is always installed, but physically disconnected another printer hp (hp 2050).
  (I tried both to disable the antivirus that reduce to a minimal install, but the problem persists).
  Thank you

  Response thanks a lot.
  In the meantime, I contacted the Support of the Italy
  Who suggested that I try to update the driver.
  I downloaded the file "HP_LaserJet_M277_PCL6_Legacy_Print_Driver_14295".
  Automatic extraction and I launched and everything seems to work.
  (I still try to scan and fax if they work).
  Thank you very much.
  Thanks to your colleague Michelle with whom I chatted.
  Contact thank you for the support of Milan that I don't know the name.
  So, I can communicate the solution found.

• HP LaserJet MFP M-125 Pro has: MacBook Air connected to a Laserjet MFP Pro but does not print

  Hi, I'm trying to print from an HP LaserJet Pro MFP M - 125 bis, which is connected to a MacBook Air via a USB cable. The software has been downloaded and the print job is always show that if it is trying to print the given print job but no print is issued and the print job is considered fact. Can you please tell me what is wrong why the print outs coming out?

  Hi @Lilium,

  I see you are having problems printing via the USB connection. I would really like to be able to help solve this problem.

  Did you download and install the software solution full or run Upates Apple?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (LaserJet MFP M125a Pro)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  How is the name of the printer listed?

  If the problem persists, try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  If you need help, let me know.

  Have a great day!
  Thank you.

• HP laserjet MFP M125a pro: m125a

  Hello, I just bought a printer hp laserjet MFP M125a pro yesterday and during printing a document of 30 pages, I noticed the steam that comes out of the printer and the fumes forming. I have that it is quite normal on cheap laser printers that don't have a fan built in red (I assume that this printer has not), but again, this is not a cheap device. I'll try to get a new high of paper and see if it is still "steam". Does anyone have this problem with this printer?

  Thank you

  Bogdan Preda

  Hi @PredaBogdan,

  According to me, there is nothing to worry.

  HP has tested the performance of this product extensively, and this moisture is part of the normal operation of the product. The steam occurs because moisture condenses in the output area until the internal temperature reaches a level at which occurs without condensation.

  Thank you.

• HP LaserJet Pro M1136: HP printer MF1136 will support 8.1 Win 64 bit

  Dear support,

  Please let me know that the MFP HP Laserjet Pro M1136 will support Windows 8.1 (64-bit) operating system.

  Whetehr the 1136 of MFP HP Laserjet Pro printer drivers will support & install WIN 8.1 (64-bit).

  Concerning

  R.Pradeep

  Hi Shalomil,

  Thank you for your information and update.

  Concerning

  R.Pradeep

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• COLOR LASERJET MFP M177FW PRO: nto all 4 colors printing

  greetings to you all, I have bein using my laserjet color mfp printers pro m177fw very do well no problem, but all of a sudden it does not print colors, including black and I check all the settings and hey there all ok so guys please help me solve this problem

  Hi @B_J1,

  I read your post and see that you are not able to print one of the 4 colors. I want to help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  HP Color LaserJet Pro M177fw MFP and printer HP LaserJet Pro MFP M127fw and M128fw printers - print a Configuration report.

  Please, try the procedure described in this document to see if it will help to solve this problem.

  The problems of print quality for the HP Color LaserJet Pro MFP M176n and M177fw series printer.

  What operating system do you use?

  Mac OS X: how to find which Mac OS X Version is on my computer?

  How to find the Windows Edition and the Version on your computer.

  How is the printer connected? (USB, Ethernet, WiFi)

  You use Genuine HP Toner?
  What are the levels of toner?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• HP Laserjet MFP M175nw: New router just won't recognize the printer - Laserjet MFP M175nw

  Hi all.

  It's probably a little deeper than a problem of means.

  My printer above works fine on my 2 other routers modems, even now.

  I got a new modem / router from Telstra, Technicolor TG797n v3 model.

  A number of home devices works fine with this, including computers, phones and ipads, AND EVEN an ANOTHER PRINTER HP (Laserjet CP1025nw).

  However, it simply will not recognize the MFP M175nw. I tried so many ways, restarts and redefinitions, plant a certain number of times. Tried of WPS WPS PIN code wit and EVEN directly connect to the router with a Ethernet cable. -Do anything, router simply does not see the printer.

  I even did an update of the firmware on the printer. Still not good.

  I even downloaded and run the HP print and Scan Doctor - even this program cannot find this printer.

  Any help would be greatly appreciated.

  Thank you.

  -Fauzer.

  Hi, congratulations for the suggestion. As it is a House that is put in place, the budget is a consideration.

  My linksys WAG325n is still in good condition and managed all of the printers and devices witout a problem.

  I'll try to do my gateway Tehcnicolor a pure way and the linksys router.

  I don't know exactly how to do right now, but I'll have a go, if you have any indication at the same time, please share.

  Thanks heaps.

  -Fauzer.

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• LaserJet MFP M277dw Pro: problem with printing issue

  We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you

  UPDATE: took MFP and was checked by techie printer, tried a new toner and does no differenct so he rang HP and they replaced the MFP, it was still under warranty

  Thanks to those who have tried to help

• LaserJet Pro M177 MFP: HP LaserJet MFP M177fw Pro no widget Scan on the printer

  My newly purchased printer HP LaserJet Pro MFP M177fw don't have a widget to Scan on the printer screen. So, I can't scan and send it to email directly, without having to turn on a computer.

  Can you please help me, thanks.

  Herza

  Hi @Herza,

  I see by your post that you would like to know how to scan from the control panel of the printer to send. I would like to help you today. Please select "Acceptable Solution", if these measures help to solve this problem. Thank you.

  This model is not the function of scan from the control panel. You must use the HP scanner on a computer to scan software.

  This document provides the steps for scanning on Windows 7. HP LaserJet multifunction printers - how to scan (Windows 7). You can use the HP scanning software to scan a document and then send it to the email.

  But you can install an APP on the printer itself called "Scan to Email".

  Once you register with www.hpconnect.com, you can add the APP.

  Click on add a device under the devices tab.

  Put in the claim code you printed to register and add the printer.

  Click the Services tab, then click on the sign - on the right side.

  Select your printer from the drop-down list.

  Then scroll to the application called "Scan to Email".

  Click on add to my printable cards.

  Now you should have an icon on the screen of the printer under APPS, called "Scan to Email".

  I hope this helps. If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.